Used Berg & Schmid X-Rock 1250 for sale (63,179)

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. Fgodpfxjt Eacgs Ahped • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, cutting diameter 360 mm saw band length 5050 x 41 x 1,3 mm cutting width 1,3 mm cutting speed 15-100 m/min total power requirement 4 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3,0x 2,6 x 2,2 m The X-SMART 4 ??is an automatic 2-column band saw suitable for straight cuts in solid materials with a diameter of up to 360 mm. Other features include: 4 kW drive motor with 41 mm saw blade width Modern 7" touchscreen CNC control Inclined saw frame Solid 2-column structure Linearly guided material sensor Hydraulic cutting pressure regulation 500 mm feed unit Double vise 2 vises in front of and 2 vises behind the saw blade Electrically driven chip conveyor Cleaning gun Full enclosure LED work light Minimum remnant length 100 mm Optionally available: Bundle clamping device; MMS and roller conveyors Fgjdpowg Sflefx Ahpod

Condition: used, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 410 mm, control type: CNC control, 1 used band saw automatic machine Manufacturer: Berg & Schmid Model: X Tech 410 Technical specifications: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control - Band run monitoring with automatic feed adjustment - Automatic cut-in for the first cut, minimum remnant length 15 mm - Infinitely variable, frequency-controlled saw drive - Clamping pressure regulation for thin-walled tubes and profiles Fgedpfxoytvqqe Ahpod - Hydraulically driven chip conveyor - Automatic double-sided saw band lift-off device - Hydraulic saw band tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Paint finish: platinum grey RAL 7036 and turquoise RAL 5018

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels Fjdpfofg E Hpox Ahpsgd • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Year of construction: 2007, condition: good (used), machine/vehicle number: 073759001, Offer 22489 Technical data: - Cutting range at 90°: - Round: 320 mm - Flat: 320 x 320 mm - Material feed system - Saw band dimensions: 5095 x 34 x 1.1 mm - Cutting speed: 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure, infinitely adjustable - Hydraulic material clamping device - Chip conveyor - Coolant system - Chip removal conveyor: 2500 mm - Drive: 400 V / 4.0 kW Fodpfeim Ildex Ahpogd - Space requirement: approx. W 2500 x H 1950 x D 2000 mm - Weight: approx. 2200 kg

Condition: new, Year of construction: 2023, BERG+SCHMID Aluminum Circular Saw Model VELOX 350 Manual Speed: 1800+3,600 rpm - Mitre left + right 45° - Head bevel cuts up to 45° (Schifter) - Ball bearing rotary table - Machine base - Highest cutting quality due to vibration absorption - Very smooth running cut - Pull-through start and high performance - Machine base with chip drawer Fsdpjr Ilktsfx Ahpjgd Saw blade dimensions: 350x32mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Hydro-pneumatic control of the saw head · Pneumatic double clamping device · Pneumatic vertical clamping device · Electro-pneumatic material feed unit with material hold-down device · Vernier for length adjustment · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Leftover piece length in automatic mode 210 mm MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator Fodpfx Ahsd Iinzjpjgd

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm Fgodpjd Iin Ajfx Ahpod capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,27 t dimensions 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW Fedpfx Ahsd Iin Depegd weight of the machine ca. 0,22 t dimensions 0,7 x 0,9 x 1,9 m ATTENTION: SPECIAL PRICE!!! - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Pneumatic double quick clamping device Vices close when lowering - Ball bearing table - Machine base - Powerful and powerful - High-quality workmanship

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device Fgedpfx Asyrhu Sshpjd • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom!! Roller conveyors optional!! Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the use of our B & S Coolmatic Plus is mandatory necessary. CNC Control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds Fedpfxjd Iinyo Ahpsgd · Visualization of the entire workflow with simple data entry

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular sawing machine VELOX 350 VA-MPS fully automatic hydropneumatic machine For saw blades up to 350 mm Ø, miter left + right 45° and bevel cuts up to 45° left + right. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat - 45°L 65mm round, 60mm square, 180x50mm flat - 45°R115mm round, 100mm square, 150x80mm flat Fgedpfx Asrpiu Dohped Standard equipment: - State-of-the-art micro-processor control with multifunctional display - Safety package with the following functions: 1. minimum input pressure monitoring 2. vice monitoring/material clamping - Hydro-pneumatic control of the saw head - Pneumatic double clamping device - Pneumatic vertical clamping device - Electro-pneumatic material feed unit - Nonius for fine length adjustment - Integrated coolant spraying device - Connecting piece for chip extraction system Speed 3600 min-1

Condition: good (used), Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic Fedor A H R Tepfx Ahpjgd -Dimensions: 890/600/H1670 mm -Weight: 198 kg

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Saw blade size: 350 mm Fjdpfxozfn E Ao Ahpogd 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45°

Condition: excellent (used), Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, faceplate -Manufacturer: Schmid, Plan and boring head -Type: UBS Gr.1 -Recording: SK40 -Setting accuracy: 0.02 and 0.01 mm Fedpfx Aorzvwwehpsgd -Accessories: see photos -Case dimensions: 240/125/H100 mm Total weight: 4.0 kg

Condition: used, Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor, roller curve conveyor Fgjdpfx Aetvb Eyohped -Manufacturer: Schmid Fördertechnik, roller curve conveyor 90° with drive -Case: stainless steel -Rolls: Ø 55-85 x 500 mm -Speed: 15 m/min -Drive: SEW-Eurodrive, see photo nameplate -Conveyor width: approx. 500 mm -Transport dimensions: 2000/1200/H830 mm -Weight: 141 kg with pallet

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Manufacturer: Schmid, rotary table with three-jaw chuck -Type: TWS200 -Mouth size: Ø 200 mm -Dimensions: 250/250/H365 mm Fgsdpfx Asii E Tnehpod -Weight: 52 kg

Condition: good (used), Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head -Manufacturer: Schmid, plan and boring head -Type: S.AdK 6 -Recording: SK50 -Adjustment accuracy: 0.01 mm -Dimensions: 175/150/H305 mm -Weight: 24 kg Fgsdpfx Ahsxdwx Aopsd

Condition: good (used), Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool, facing and boring head -Manufacturer: Schmid, facing and boring head type -Recording: MK4 Fodpfem Dyhmjx Ahpogd -Dimensions: 222/87/80 mm -Weight: 3.1 kg

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, carriage ----- Technical data ----- Cutting height: 60 mm, Voltage: 230 V Fgodpfxsu R S I Ho Ahpjd

Condition: used, Multiplex boards used length 1680 mm width 1250 mm board thickness 45 mm weight 68,5 kg Fodpfx Ahjl Uvxnjpegd in the pallets there are 9 holes with diameter 12 mm several presentseveral present

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Double miter bandsaw - AutoCut system: automatic lowering of the saw frame with rapid approach - Miter angle: 45° to the right, 60° to the left - Clamping device adjustable and movable in the T-slot - Cutting speed: 40 + 80 m/min - Stationary base with electric coolant system and large chip collection drawer - Saw band dimensions: 3375 x 27 x 0.9 mm Cutting range: 90° Round Ø 280 mm, square 250 mm, rectangle 350 x 200 mm Fgsdpjzkiy Ejfx Ahpod 45° Round Ø 240 mm, square 220 mm, rectangle 230 x 220 mm 90° Round Ø 170 mm, square 150 mm, rectangle 170 x 100 mm

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Fjdet I R Edepfx Ahpjgd Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: ready for operation (used), Year of construction: 2019, This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Additional equipment • Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. • Leveling element (1 set = 4 pieces) with stud bolt M 12x100. • Feed side – left. • Feed roller conveyor URB 290, Length 3000 mm. • Feed adapter for URB 290/400. • Outfeed roller conveyor URB 290, Length 2000 mm. • Removal adapter for URB 290/400. • Connecting piece for machine, attachment on the right. Fgedpfx Aex Nr Sqjhpjd • LM 55 M/man. Length stop, Measuring length 2000 mm. Machine Benefits Technical Machine Benefits • Automatic saw with a roller conveyor feed side length of 1500 mm and a discharge side length of 1000 mm. • Sheet metal tray for setting the machine. • Control unit attachment of the control unit to the swivel arm. Extra Information Machine still under power

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 250 Super AutoCut double mitre bandsaw Speed: 18-110 - Mitre left 60° + right 45° - Sliding quick clamping vice - Solid vice + machine casting - Ball bearing rotary table - Hydraulic brake cylinder - Solid, large material support - Automatic cooling system - Worm gear running in oil bath - Closed saw frame - Adjustable ball roller bearings - Tool compartment - door in the base - Cut monitoring by ammeter - Cutting pressure feed regulator - Support roller (infeed side) Fodpfx Ahsr Ik Sqspjgd - Machine base (supplied disassembled) GBS 250 Super AutoCut 3-stage system: I. Automatic lowering of the saw frame via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut II. high-speed lowering of the saw frame to the workpiece, then switch to normal saw feed. (e.g. for scribing) III. Hydraulic cylinder works as brake cylinder: a) Manual operation (e.g. for notching) or b) Lowering in idle state Saw blade dimensions: 2765x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein