Bandsaw - Horizontal

BERG & SCHMID GBS 185 Eco AutoCut

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm Bedpfx Aju Dbvtol Asln 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: new, Year of construction: 2025, Yanigav Earth Auger TAM 245 • Simple three-point hitch • Very robust, welded chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable auger diameters from 10 cm to 80 cm and up to 1.80 m in height • Offset of 1.30 m on each side of the axis Bsdpfx Asr Ezniel Aoln • Chassis length: 245 cm • Auger tilt adjustment (front/back and right/left) • Auger not included

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT Bjdpfx Aoudi Unel Aoln 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: new, Year of construction: 2026, CORMAK Z5020 BF Vario Column Drill Press is a versatile and modern metal drilling machine designed for intensive operation in industrial plants, locksmith workshops, and maintenance departments. The machine provides excellent stability, precision, and high working comfort thanks to stepless spindle speed adjustment and an ergonomic design. Main advantages of the machine Stepless spindle speed adjustment – a range of 190–2700 rpm allows optimal adjustment of parameters to the type of material being processed. Rigid machine body construction – minimizes vibrations and improves drilling accuracy. Height-adjustable worktable – precise rack adjustment and the possibility of tilting within a range of ±45°. Electronic speed indicator – provides real-time control of drilling parameters. Laser pointer and LED lighting – facilitate tool positioning and improve visibility of the working area. 100 mm machine vice included – the machine is ready for operation immediately after setup. Construction and technology The CORMAK Z5020 BF Vario column drill press is equipped with a stable 70 mm diameter column and a wide 480 × 290 mm base, ensuring excellent support and rigidity of the entire structure. The standard MK2 spindle features a 120 mm stroke, allowing deep drilling without the need to reposition the workpiece. The worktable design enables rotation and tilting, allowing the operator to precisely adjust the position of the workpiece according to the machining operation. Precision and work efficiency The powerful 750 W motor and maximum drilling capacity of 20 mm enable effective machining of most metal materials. The electronic speed indicator and drilling depth stop provide full control over the process. The long column and large table height adjustment range (660 mm) allow machining of taller workpieces and the use of tools with larger reach. Applications The Z5020 BF Vario model is a metal column drill press recommended for: mechanical and locksmith workshops, maintenance departments, light and medium industry, prototype work and single-piece production. Standard equipment 100 mm machine vice Laser drilling pointer LED work light Electronic speed indicator Three-arm spindle feed lever Drilling depth stop Worktable with rack height adjustment Technical specifications Parameter Value Blodpfx Alevuf Iks Asn Maximum drilling diameter 20 mm Spindle speed range 190–2700 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 120 mm Spindle-to-column distance 170 mm Spindle-to-base distance 1060 mm Table height adjustment range 660 mm Column diameter 70 mm Table dimensions 280 × 280 mm Base dimensions 480 × 290 mm Motor power 750 W Machine height 1650 mm Weight 75 kg

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: electric, next inspection (TÜV): 10/2025, Year of construction: 2020, operating hours: 900 h, Equipment: UVV, crane, low noise, rubber tracks, tip top condition! Bodpevriuvjfx Al Aoln

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 35 + 70 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m Double miter metal band saw, GBS 250 Super AutoCut (20413) Bjdpfx Alourc S Ro Ajln - Miter cuts up to 60° left and 45° right - Ball bearing rotary table Quick clamping device Solid, large material support Automatic cooling

Condition: new, distance between shaft and table: 470total power requirements: 2,2 kwweight approx.: 1,2messurements (LxWxH): Länge2400 mm Breite/Tiefe2160 mm Höhe2300 mm Gewicht 1200 kgspindle rotation speed: 60 4200 min¯¹ Bljdpsd H Hhzefx Al Ajn

Condition: used, Year of construction: 2015, front tire size: 540/65R30, rear tire size: 650/65R42, Equipment: compressed air brake, Gearbox NEW !!! / Blsdpfor Nwkxox Al Aon

Condition: used, Year of construction: 2007, grinding length 600 mm grinding width 400 mm workpiece height 375 mm Gewartet und Längsachse neu eingeschabt Glasmaßstäbe in der Senkrecht- und der Quer-Achse Schleifscheine 300/50/76,2 mm Bodpfx Asykmqvsl Asln Magnetspannplatte 600x400mm mit Haftkraftregelung Universal-Papaierfilterautomat UPF100 mit 280l Tankinhalt.

Condition: new, DRILL PRESS WITH BELT DRIVE DIGITAL DEPTH GAUGE, REVERSIBLE TABLE WITH INTEGRATED VISE AND SCORER LED LIGHT Quick-action keyless chuck 1 - 16 mm B18 CM 4 chuck attachment SUPPLIED. Drilling capacity on cast iron with Ø 32 mm pre-hole. Max drilling capacity on steel with pre-hole (s235jr) Ø 28 mm Continuous drilling capacity Ø 20 mm Bledpfx Alsm E Uhwe Aon Morse taper 4 Spindle 1 - 16 mm B18 Approximate spindle speed (12) 150 - 2450 rpm Spindle stroke 120 mm Spindle sleeve ø 62 mm Column ø 92 mm Height 1720 mm Spindle-column distance 255 mm Distance from machine nose to table 700 mm Table dimensions 460 x 425 mm Distance machine nose-base 1220 mm Hollow 14 mm Clamp 210 x 165 mm Single-phase motor 230 V 50 Hz 1.5 kW Net weight 135 kg Packaging dimensions 1415 x 655 x 320 h mm Gross weight 158.00 kg