Used Berger Lahr Rdm 599/50 for sale (35,195)

Condition: used, Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 Dcjdpsq Adp Rsfx Apben -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Condition: ready for operation (used), SIG Positec Berger Lahr linear positioning system LP-A + gripper unit, consisting of: LP-A (X=300/Z=100), VRDM 3910/50 LWB motors, UCH 325V, IN 2A, MN 4Nm, ROBA-stop-M 4/891.124.1 SO, 24V, 22W, 6Nm, used, in very good condition, 100% functional. Dcodpsi Eclyjfx Apben

Condition: ready for operation (used), Berger Lahr VRDM 397/50 LWC SIG Positec 52525035600 stepper motor, serial number: 9735750 with encoder, used, in good condition, 100% functional, delivery as per photos. Dcedpew Ikbmjfx Apbjn

Condition: used, Year of construction: 2000, table diameter 800 mm table load 1100 Kg swivelling range 360 Grad connected load frequency 400 V weight 3,5 t Dedpfezzd Tuex Apbocn Dimensions (LxWxH) 2,8 x 1,2 x 2,4 m Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet

Condition: ready for operation (used), Berger Lahr VRDM397/50LWCEB / BRS397W361FCA stepper motor, serial number: 2404104758 + Binder 76 43108H07 rotary encoder. Connector partially broken, see photo. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Dsdsi D E Npopfx Apbjcn

Condition: used, Year of construction: 2000, table diameter 800 mm table load 1100 Kg swivelling range 360 Grad connected load frequency 400 V weight 3,5 t Dimensions (LxWxH) 2,8 x 1,2 x 2,4 m Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet Dodpfx Aozzd Uxepbecn

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Dcodpfx Aoq Nn Hcopbon Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: used, Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece Dcodpfx Apon Nbnmsbon -Dimensions: 310/60/H180 mm -Weight: 2.5 kg/pc.

Condition: ready for operation (used), Berger Lahr SR 5-20.500.1 servo stepper motor controller, used, 100% functional. Djdpfx Aoi D E I Iopbjcn

Condition: excellent (used), Different Heidelberg CTP Servo-controller for Suprasetter Djdpezwfzxefx Apbecn PL.570.3000-02 BERGER-LAHR Servo Controller for M3 drive motor for Suprasetter 74/75/105 Classic & A105 PL.572.3100-0x SCHNEIDER Servo Controller for Suprasetter A52/74/75 GEN. 1+2 PJ.105.100F/0x SCHNEIDER Servo Controller for Suprasetter A52/75 GEN. 3+4 (>2009) second-hand, tested All offer subject to prior sale

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal, with robotic automation Manufacturer: DMG MORI Type: DMU 50 3rd with Lang RoboTrex52 Year of manufacture: Machine 2017 / Automation 2021 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 32,000 h Spindle hours: approx. 12,000 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter - Tank 600 l - Canopy - Rotary feedthrough in spindle center - Compressed air through the spindle center - Flushing gun - Oil and emulsion mist separator, mechanical - Infrared measuring probe, manufacturer Heidenhain TS 649 (if available) - Preparation for 3D quickSET - Operating mode 4 - ATC – Application Tuning Cycle Dcodpfxoz A A E Ns Apbjn - Tool breakage monitoring TRS2 (if available) - Tracy surface interpolation - Automation system Lang RoboTrex 52 Accessories, tools, and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center Dsdpfxsz A A Dxe Apbecn - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: good (used), Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos Dodpfx Aji I Hdcopbocn -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Condition: good (used), Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 Dcedpfx Ajn Nbmwspbsn -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Condition: new, SIG Positec / Berger Lahr TLC 532 F servo drive SN:1110070929, unused in opened original packaging, 100% functional, delivery as per photos Dcsdpfxez Acx Sj Apbsn

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor Dodpfspvqzajx Apbocn -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2015, suspension: air, tire size: 385/65R22.5, color: green, Year of construction: 2015, = Additional Options and Accessories = - Rear doors - Alloy wheels - Air suspension = Notes = Berger Ecotrail Tautliner, 3-axle - SAF axle - Steering axle at the rear Year of manufacture: 4-8-2015 VA9USLAKTFFZT0532 SAF axle Alloy wheels Pallet box Rear axle steering = Further Information = Axle configuration Tire size: 385/65R22.5 Dedpfxoz Eai Ds Apbocn Suspension: Air suspension Rear axle 1: Alloy wheels; Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 2: Alloy wheels; Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 3: Alloy wheels; Max. axle load: 9000 kg; Steerable; Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 5,460 kg Payload: 33,540 kg GVW: 39,000 kg Condition Technical condition: good Optical condition: good

Year of construction: 2019, condition: good (used), Approx. 560 shelving units for shelving system / Berger, type Bert, 1m and 1.30m x 0.50m, 150kg, various – used: Price per shelving unit: €9.00 (net)! Minimum order quantity: 50 units Manufacturer: Shelving system / Berger Type: Bert Year of manufacture: approx. 2019 Depth: 50cm Width: approx. 1.30m = 540 units Width 1m = approx. 20 units Height: approx. 4cm Load capacity: 150kg Approx. 100 - 120 units per pallet Dcjdeil H Naopfx Apbsn Condition: good Available: immediately Location: Frankenberg / Saxony

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, BERGER drill grinding machines are precise - fast - simple - economical And they help you increase productivity. These ergonomic and easy-to-use, precise drill grinding machines offer you, among other things, the following advantages: • Significantly increased tool life of your drills through even distribution of cutting forces across both cutting edges • Significant reduction of feed forces thanks to precise, symmetrical point thinning • Improved diameter accuracy - the precise and optimizable grinding results in holes whose diameter exactly matches the nominal diameter of the drill. • Improved positional accuracy - the sharp drill tip, precisely pointed and close to the center, no longer "wanders" upon initial contact with the workpiece, but cuts smoothly from the start • Resharpening, point thinning, and inspection in a single setup Dcjdsbrptvopfx Apbsn Furthermore, the purchase of new drilling tools is drastically reduced, as you can now resharpen your existing drills up to 40 times or more in-house! So you're not only protecting the environment, but also your wallet, and, most importantly, your employees' nerves! Keep up with the times... keep up with BERGER technology. Our EPG-1 has been copied countless times over the past 18 years, but its quality has never been matched... With EPG1 / #easy-point-grinder #Grind your drill bits for your material and your operating conditions! For drills (HSS and solid carbide) with diameters ø 7 – 20 mm (Optional ø 3 – 8 mm and ø 20 – 30 mm) with 90° – 140° point angle Technical Data EPG1 Point angle continuously adjustable 90° – 140° Collet set for drill diameters 7 – 20 mm Optional collet set for drill diameters 3 – 8 mm Optional collet set for drill diameters 20 – 30 mm Point thinning device, point thinning depth continuously adjustable CBN grinding wheel (for HSS drills Ø 118 mm) Optional diamond grinding wheel (for carbide drills) Ø 118 mm Single-phase AC industrial motor 250 watts Spindle speed 2900 rpm Electrical connection 230 Volt 50 Hz Dimensions (L x W x H) approx. 30 x 40 x 20 cm Weight approx. 22 kg Sharpen your drill bits for your material and application conditions quickly, easily, precisely, and affordably

Condition: used, maximum load weight: 28,340 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2014, next inspection (TÜV): 10/2028, Year of construction: 2014, Internal vehicle number: VTC30057 Available immediately More information at: Luis Lucena Viktoria Sologubova Berger SAPL 24 SATA tank semi-trailer – 35 m³ – 4 compartments – 3 axles Used Berger ecotrail tank semi-trailer, type SAPL 24 SATA, manufactured in 2014. According to the seller, the three-axle semi-trailer has a total capacity of 35 m³, divided into four compartments. With a permissible gross weight of 35,000 kg and an unladen weight of 6,660 kg, the payload is 28,340 kg. Technical data: * Vehicle number: VTC30057 * Vehicle condition: Used * Category: Tank semi-trailer * Manufacturer: Berger Fahrzeugtechnik * Product line: Berger ecotrail * Type: SAPL 24 SATA * First registration: 10/2014 * Year of manufacture: 2014 * Axles: 3 * Permissible gross weight: 35,000 kg * Unladen weight: 6,660 kg * Payload: 28,340 kg * Tank volume approx.: 35 m³ * Number of compartments: 4 Data according to manufacturer's identification plate: * Manufacturer: Berger Fahrzeugtechnik Ges.m.b.H. * Country of manufacture: Austria * Vehicle identification number: VA9USLAKTDFZT0437 * EC type-approval number: e42007/460339*02 * Technically stated total mass: 39,000 kg * Permissible fifth-wheel load: 11,000 kg * Technically stated fifth-wheel load: 12,000 kg * Permissible axle load: 3 × 8,000 kg * Technically stated axle load: 3 × 9,000 kg Inspection and functional testing are possible by prior arrangement. Further information, photos and videos are available upon request. Subject to errors, changes and prior sale. We will gladly accept your used vehicle in part exchange. Dodpfozfuqrjx Apbscn Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, axle configuration: 3 axles, loading space length: 136,300 mm, loading space width: 24,800 mm, loading space height: 29,500 mm, total width: 25,500 mm, total height: 40,000 mm, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front - Disc brake system = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at [phone number]). Berger SAPL 24 LTMN, flatbed/curtain-sided trailer SAF axles, Wabco ABS, spring brake, disc brake, sliding tarpaulin (side), sliding cover, lifting roof, air suspension, 1st axle liftable, tire tread: 1st axle 5-7mm, 2nd axle 4-5mm, 3rd axle 4-5mm, cargo space dimensions: length: 13,630mm, width: 2,480mm, height: 2,950mm, permissible total weight: 35,000kg, unladen weight: 5,180kg, payload: 29,820kg. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. [phone number]) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale excepted !!! Dcodoy Tg D Nspfx Apbsn = Further Information = Unladen weight: 5,180 kg Payload: 29,820 kg GVW: 35,000 kg Please contact Tobias Ebert for further information.

Condition: used, maximum load weight: 29,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2018, Year of construction: 2018, Equipment: ABS, * Berger 3-axle sliding tarp semi-trailer * Air suspension * BPW axles * Drum brakes Dcedpszx I S Ajfx Apbon * Edscha cover * ABS * ABS

Condition: used, empty load weight: 5,170 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2014, suspension: air, tire size: 435/50 R19,5, Year of construction: 2014, Equipment: ABS, Tare weight: 5170kg, GVW: 35000kg, Cargo securing with certificateTyre size: 435/50 R19.5, DIN EN 12642 (code XL) certificate, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, Fire extinguisher holder, Toolbox, Sliding roof, 1x15 and 2x7 pin plug, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Dsdpfjzvh Ufjx Apbjcn

Condition: good (used), Year of construction: 2019, approx. 554 shelves for racking system / Berger, type Bert, 1m and 1.30m x 0.50m, 150kg, various - second-hand - : Dsdpfxordgawo Apbscn Price per shelf: 9.-€ (net)! Minimum purchase: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 49cm = bay depth: 50cm Width: approx. 1.28m (bay width 1.30m) = 434 pieces Width 1m = approx. 120 pieces Height: approx. 4cm Load capacity: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: immediately Location: Frankenberg / Saxony Frankenberg / Saxony

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2026, Optical precision drill grinding High-precision and very easy-drill grinding with optics and , Costsaver and Swiss in 100% quality. grind drills, thinning and check in the shortest time and with maximum precision. With MEGA POINT blue line you win more than once, achieve with it: - Better positioning - Improved accuracy of diameter - Significantly longer service life - Feed force is greatly reduced The MEGA POINT blue line is a versatile precision drill grinding machine, which is easy and ergonomic operation and a variety of drills handelsueblichen nachschleift perfect and optimized. MEGA POINT blue-line 1-20mm (Optiom to 30mm) Technical specifications: Our MEGA POINT drill grinding allows precise and rapid regrinding and thinning all handelsueblichen drills. Our customers have so always perfectly ground drills for disposal. The sophisticated design provides enormous flexibility in terms of the different cut angles and the thinning of the drill. Without a doubt, the world's best conventional drill grinding! Technical specifications Drill material grinding HSS and carbide HSCO Point angle adjustable 80 ° - 150 ° optional tip angle adjustable up to 180 ° Chuck with collets for drill diameters from 1 to 6.5 mm Chuck with collets for drill diameter 7 - 20 mm optional Spannzangenset for drill diameter 20 - 30 mm Average / free angle adjustable 0 - 40 ° Ausspitzvorrichtung, Ausspitztiefe adjustable CBN grinding wheel double-fine / coarse D 125 mm optional DIAMOND grinding wheel (for carbide drills) D 125 mm CBN grinding wheel for thinning D 50 mm x 4 mm Engine power 0.3 kW Spindle speed 2800 r / min Power supply 230 volt 50 Hz Dimensions (L x W x H) 50 x 50 x 50 cm Weight about 42 kg Standardausfuehrung For right- and left-cutting, two- and dreilippige drills. With built-in optics (10x Zoom) separate Ausspitzvorrichtung and: 1 Machine light 2 chucks with collets D 1 -6.5 mm and D 7 - 20 mm Djdpo R R R Ssfx Apbjcn 1 CBNDoppel grinding wheel D 125 mm fine / coarse 1 CBNSchleifscheibe D 50 x 4 mm 1 Set of service tools 1 instruction manual with spare parts list 1 CD-ROM with manual (CE Declaration) Danger: OPTIMA / TATAR Parts BERGER technology will take over on January 1, 2016, the stock of spare parts of HighTech OPTIMA AG. We can now offer genuine spare parts and service for the OPTIMA and TARTAR Boherschleifmaschinen.