Used machining centers (vertical) X-axis travel 1200-1699mm for sale (197)

Condition: like new (used), Year of construction: 2012, operating hours: 5,607 h, functionality: fully functional, 2012 LEADWELL MCV 1500i+ (4 Axis) VMC Category: Vertical Machining Centers (VMC) Reference No.: 400140 Capacity: 1520 X 1016 X 720 MM Year of Construction: 2012 Technical Specification: SPINDLE Spindle Taper : CAT/BT 50 Spindle Speeds : 4000 RPM WORKING CAPACITY Table Size : 1550 x 1000 mm Travels (XYZ) : 1520 x 1016 x 720 mm Spindle Nose to Table (Min.- Max.) : 120 - 840 mm ATC Tool Change Capacity : 24 Tools ATC Type : ARM CNC Control : Fanuc Oi-MD Ncodpfx Afex Ehibsaon Additional Details: 12" 4th Axis

Condition: like new (used), Year of construction: 2024, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1630 x 762 x 650 mm, rapid feedrates 30m/min, Spindle power 18.5 Kw, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, through spindle coolant, swarf conveyor, Fanuc i series control. Nedpfxoyia Ups Afaecn

Condition: used, YOM 2004 Mazatrol PC Fusion 640 M Axis X 1660 mm Axis Y 510 mm Axis Z 510 mm Table length 2000 mm Table width 510 mm Njdpfx Aev Ax Uyofajcn Max. part weight 1000 kg Number of tool pockets 30 Spindle taper CAT 40 Max. spindle speed 10000 rpm Spindle motor power 18.5 kW

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! Ncjdpsyf E D Rsfx Afajn TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Travel Z-axis: 635 mm Table size: 1,575 x 584 mm Spindle speed: 7,500 rpm Spindle taper: CAT40 MACHINE DETAILS Control: Haas Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle speed: 6000 1/min. spindle taper 50 SK spindle drive (S1) 10 kW table surface area 1300 x 600 mm Ncjdeyml T Iopfx Afaen table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 1st. November 2024): - Control on: 60.818 h - Machine on: 59.598 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: excellent (used), Year of construction: 2002, CNC machining center Hedelius CB 60-1200 Nsdeyk T D Ajpfx Afaecn Control: Heidenhain iTNC 426 Year of manufacture: 2002 Travel distances: X-axis: 1,200 mm Y-axis: 620 mm Z-axis: 600 mm Spindle taper: SK 40 Tool magazine: 30 positions Equipment: High-pressure filtration system with through-spindle coolant (IKZ) Chip tray Handwheel Operated exclusively with oil Machine enclosure

Condition: excellent (used), Year of construction: 2016, 5-axis machining centre Hedelius RS605 K -1200 Control: Heidenhain iTNC530 Year of manufacture: 2016 Nsdpfx Asyk S Sxsfascn Travels: X-axis: 1,200 mm Y-axis: 650 mm Z-axis: 520 mm Fixed machine table: X-axis: 570 mm Y-axis: 650 mm Z-axis: 520 mm Number of T-slots: 7 (each 14 mm wide) Feed rate X-/Y-/Z: 0 – 45 m/min Clamping area: 760 x 600 mm Rotary/swivel table: Clamping area: Ø 520 mm Spindle taper: SK 40 Tool magazine: 30 positions Spindle speed: 50 - 12,000 rpm Equipment: Kinematics Option Handheld operating unit Sieve filter system KM500 ICS 25 bar Chip conveyor Air blow gun Rinsing gun M&H workpiece probe M&H wireless table probe

Condition: excellent (used), Year of construction: 2003, TRAVELS METRIC X axis 508 mm Ncodpfx Afjyl Ngcoaon Y axis 406 mm Z axis 508 mm Spindle nose to table (~ max) 610 mm Spindle nose to table (~ min) 102 mm

Condition: new, travel distance X-axis: 1,200 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 620 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 8,500 kg, table length: 1,400 mm, table width: 600 mm, controller model: TNC 7, coolant supply: 20 bar, spindle motor power: 17 W, rapid traverse Z-axis: 32,000 m/min, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW 3-AXIS MACHINING CENTRE Control and Motors: HEIDENHAIN TNC 7 digital path control HEIDENHAIN 16" TFT display HEIDENHAIN package: motors, measuring systems, HR-510 handwheel Additional equipment: Preparation for 4th axis (rotary table) Full enclosure with laterally folding viewing windows Ncedpfx Aevn Eqxjfasn Precision: Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Only inquiries from Germany will be answered

Condition: new, travel distance X-axis: 1,200 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 32,000 m/min, torque: 108 Nm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, workpiece weight (max.): 800 kg, total height: 3,200 mm, total length: 3,350 mm, total width: 2,500 mm, table width: 600 mm, table height: 925 mm, table length: 1,400 mm, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 17 W, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CLEARANCE SALE AT SPECIAL PRICE (BRAND NEW MACHINING CENTRE) Ncodpfoyc Tk Tjx Afaen Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN 15" TFT monitor HEIDENHAIN package (motors, measuring systems, HR 510 electronic handwheel) Additional Equipment: Preparation for 4th axis (rotary table) Full enclosure with side folding viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm

Condition: new, BRAND NEW 3-AXIS MACHINING CENTER HEIDENHAIN TNC 7 digital path control HEIDENHAIN 16" TFT display HEIDENHAIN package (motors, measuring systems, and handwheel) Nsdpfx Afohy Atfsascn X-axis: 1,430 mm Y-axis: 670 mm Z-axis: 640 mm Table size: 1,500 x 620 mm Table load capacity: 1,200 kg Spindle speed: 10,000 rpm (oil-cooled) Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 32 kW ICS – Internal coolant supply – 20 bar Rapid traverse: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC tool changer: 30 positions (optionally up to 60) Hinged belt chip conveyor 4th axis preparation (rotary table) Full enclosure Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 1,620 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 1,300 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 11,000 kg, table length: 1,700 mm, table width: 620 mm, controller model: TNC 7, coolant supply: 20 bar, spindle motor power: 25 W, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rotational speed (max.): 10,000 rpm, spindle nose: SK 40 BIG PLUS, table load: 1,300 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FACTORY-NEW 3-AXIS MACHINING CENTER Ncedpehy Atisfx Afasn Control and Motors: HEIDENHAIN TNC 7 digital path control HEIDENHAIN 16" TFT screen HEIDENHAIN package: Motors, measuring systems, HR 510 handwheel Additional Equipment: Preparation for 4th axis (rotary table) Full enclosure with side folding viewing windows Accuracies: Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Only inquiries from Germany will be answered

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,520 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 245 mm, overall weight: 2,500 kg, spindle motor power: 3,000 W, number of axes: 3, This 3-axis Datron MLCube B was manufactured in 2017. It features an impressive X-axis travel of 1520 mm, Y-axis travel of 1150 mm, and Z-axis travel of 245 mm. The machine is equipped with a powerful 3.0 kW HF spindle and an automatic tool changer with 24 positions. If you are looking to get high-quality machining capabilities, consider the Datron MLCube B vertical machining centre we have for sale. Contact us for further details. • Portal clearance: 200 mm • Spindle type: HF Spindle PowerS Synchro • Tool interface: HSK-E 25 • Automatic tool changer: 24 positions • Control system: DATRON HSPro • Voltage: 3 x 400 V • Frequency: 50–60 Hz • Input power: 5 kVA • Maximum fuse protection: 16 A • Operating pressure: 0.7–1.0 MPa (7–10 bar) Additional equipment • Hand control unit: B10-2 • Minimum quantity lubrication system: 5 L tank • Spray unit: 4 nozzles • Spindle cooling unit: HI-KG • Vacuum plate: 1000 x 500 x 70 mm • Vacuum distributor: 6-fold Pro Ncodpfx Asymz Eyjfaon • Vacuum pump capacity: 200 m³/h • Vacuum pump motor power: 5.5 kW • Vacuum pump weight: approx. 150 kg

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,520 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 245 mm, overall weight: 2,500 kg, number of axes: 3, This 3-axis Datron MLCube B was manufactured in 2018. It features an impressive X-axis travel of 1520 mm, Y-axis travel of 1150 mm, and Z-axis travel of 245 mm. The machine is equipped with a high-frequency spindle capable of reaching speeds up to 60,000 rpm and includes a 15-fold automatic tool changer. If you are looking to get high-quality machining capabilities, consider the Datron MLCube B vertical machining centre we have for sale. Contact us for further details. Ncjdpeymzy Defx Afaen • Portal clearance: 200 mm • Max feed rate: up to 20 m/min • Feed rates (XYZ): X 20 m/min / Y 20 m/min / Z 11.5 m/min • Spindle: High-frequency, 2.0 kW • Collet size: 6 mm • Max tool diameter: 8 mm • Tool changer: 15-fold automatic tool changer • Tool system: Direct shaft • Control system: DATRON CNC with terminal • Table clamping area: approx. 1000 x 1500 mm • Installed power (machine): 4 kVA • Electrical supply (machine): 3 x 400 V, 50–60 Hz • Operating pressure (machine): 0.7–1.0 MPa (7–10 bar) • Machine dimensions (without terminal): 2410 x 2280 x 1950 mm Additional equipment • Hand control unit: B10-2 for HSPro • Vacuum plates: 1000 x 500 x 30 mm (3 pcs) • Vacuum pump: • Capacity: 200 m³/h • Motor power: 5.5 kW • Operating voltage: 3 x 400 V • Max fuse: 16 A • End pressure: 10 mbar • Weight: 150 kg • Software: PrimCAM-ET (second license)

Condition: used, Year of construction: 1995, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: Acramatic, controller model: 850SX, table width: 660 mm, table length: 1,370 mm, rotational speed (min.): 60 rpm, rotational speed (max.): 8,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel 1.270 mm Y-axis travel 660 mm Z-axis travel 660 mm CNC Control Acramatic 850SX Table size 1.370 x 660 mm Table load 910 kg Rapid traverse X/Y/Z-axis 15.000 mm/min Spindle speeds 60 - 8.000 Rpm Spindle nose ISO 40 Distance Spindle - Table min/max 150/880 mm Toolchanger 21 positions Featured with: - Coolunit - Handwheel control - Full documentation Country of origin UK Spindle motor 9 kW Ncsdsyg Et Uopfx Afaen Machine weight 8.000 kg Machine WxDxH 3.600 x 2.900 x 3.000 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 4,101 h, functionality: fully functional, machine/vehicle number: 1159962, Equipment: chip conveyor, HAAS VF 5 SS VERTICAL MACHINING CENTRE YEAR 2019 SPINDLE SPRRED 12,000 RPM TRAVELS - X AXIS - 1270 MM Y AXIS - 660 MM Z AXIS - 635 MM TABLE SIZE 1321 X 584 MM THROUGH SPINDLE COOLANT HIGH SPEED MACHINING Ncsdpfx Aow N Nw Aefaen 40 TAPER RIGIT TAP 30 ATC 4TH AXIS ENABLED SWARF AUGER HOURS IS ON THE PHOTOS

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Njdpfx Aoygw E Nefaecn Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2000, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece weight (max.): 1,200 kg, total height: 2,900 mm, total length: 2,995 mm, total width: 2,350 mm, overall weight: 6,700 kg, table length: 550 mm, table width: 1,200 mm, coolant supply: 15 bar, rotational speed (max.): 12,000 rpm, rotational speed (min.): 35 rpm, table load: 1,200 kg, CNC Vertical Traveling Column Machining Centre CNC Control Mazatrol 640 M Table size 1200 x 550 mm Nodpfx Ajygw D Esfascn Table load 1200 kg Number of pallets: 1 x Movement X-axis 1020 mm Movement Y-axis 510 mm Movement Z-axis 460 mm Spindle taper MAS BT 40 Spindle speed 35 - 12.000 1/min Spindle motor 22/15 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • Tool magazine: 30 stations • Table: Rigid clamping table • Coolant system Nedpfsylw Stox Afascn • Electronic Thermal Compensation (iTNC) • Machine on hours: 11,927 h • Spindle on hours: 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, controller manufacturer: Heidenhain iTCN 530, workpiece weight (max.): 1,000 kg, table width: 620 mm, table length: 1,350 mm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, tool length: 220 mm, tool diameter: 150 mm, tool weight: 7 g, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cabin 54 pallet Storage Gressel (ø340 x 348mm x 89kg ) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Ncodpfjxlrnbox Afasn Basic machine dimensions / weight Weight kg: 8.000

Condition: ready for operation (used), Year of construction: 2020, operating hours: 11,574 h, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, total height: 3,235 mm, overall weight: 13,500 kg, product length (max.): 5,000 mm, This 3-axis DOOSAN MYNX 7500 was manufactured in 2020, featuring a Heidenhain TNC 620 control with a TS 460 probe. It has a table size of 1600 mm by 750 mm and a maximum spindle speed of 12,000 rpm. With dimensions of 5000 × 4050 × 3235 mm and a weight of 13,500 kg, consider the opportunity to buy this DOOSAN MYNX 7500 vertical machining centre. Contact us for more information. • Table Length: 1600 mm • Table Width: 750 mm • Spindle Taper: ISO 40 dual contact • Maximum Spindle Speed: 12000 rpm Ncodpfx Asx U Dtwefasn Dimensions Machine Depth 4050 mm

Condition: used, Year of construction: 2022, x-travel 1.650 mm y-travel 850 mm z-travel 900 mm Control Heidenhain TNC 640 spindle tunring speed 6.000 U/min power capacity 37 / 20 kW Ncjdpfx Afoykb Ipjaen Torque (40/100%): 824 / 549 Nm tool taper SK 50 number of tool places 24 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant supply - Table cleaning system - Infrared workpiece measurement, Heidenhein TS-460 with breakage monitoring - 4th axis, Tsudakoma RWA-250L-SM - Three-jaw chuck Ø250 mm - Extraction system - 2-stage gearbox - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2002, Used machining center from Victor Type: V Center 125 X-axis: 1250 mm Y-axis: 500 mm Z-axis: 600 mm SK 50 taper Table dimensions: 1400 x 550 mm 6000 RPM Coolant through spindle: 15 bar Nsdsyfmu Djpfx Afaecn Spindle power: 18.5 kW Tool changer: 32 stations Year of construction: 2002 Transport dimensions: height: 265 cm / depth: 235 cm / length: 450 cm

Condition: used, Year of construction: 2019, travel -x axis 1.525 mm travel -y axis 770 mm travel -z axis 625 mm control HEIDENHAIN - TNC620 table dimension (L x W) 1.600 x 750 mm numbers of positions in the tool changer 24 tool taper SK50 Milling machining centers - vertical | DOOSAN - MYNX 7500/50 II equipped with 24-way tool changer, ITC cooling system and chip conveyor. The machine only has 3.165h spindle hours. Ncjdpsyhrbuefx Afaen The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MYNX7500/50II | MYNX 7500 | MYNX7500 | MYNX-7500 | MYNX750050II

Condition: good (used), Year of construction: 2001, Haas VF4 Year of manufacture: 2001 Spindle speed: 7500 rpm Tool changer: 24 stations Ncedpfx Afoyhpa Isaon Including 4th axis