Used Blueline Sort Fluid for sale (1,685)

Year of construction: 2023, operating hours: 514 h, condition: used, functionality: fully functional, overall weight: 7,900 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0602, SORT FLUID is a dry sink-float sorting system with an integrated dosing bunker. This replaces conventional wet sink-float sorting and eliminates the need for liquids entirely. Through an innovative combination of airflow, a special bed material, and gravity, the metals are sorted according to their average particle density. This enables separation of light and heavy metals with a high purity of up to > 99%. This module is part of our rental fleet. Crodpfjxtb A Dex Aa Hjc

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Cedpfjrivv Eex Aa Herc Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, Year of construction: 2012, Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Communication Optional DeviceNet, Profibus MTBF > 71,949 hours at 30° C Crodpfxer Dwbgo Aa Hoc Conformity UL, cUL, CE, FCC (Class A), 21CFR1040, IEC-60825-1 Year of manufacture 2012 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Condition: used, Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned objects or labels in the Variantenfertigungs - or material flow control, and charge capture. Multiple scanners can be operated side by side to extend the reading width. Specific applications are picking and returns handling items in the shipping trade of so-called small, E.g. From CD\'s, books, or videos, as well as the sorting in distribution centers. The scanner in the identification of wheels or bodywork in automobile production, as well as packages for package services is further used. Delivery in Germany (without Islands): free incl. mains cable without software Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Cjdpek Aa Dwsfx Aa Horc Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: excellent (used), For sale: Sterling Fluid Systems ZTIC 040160 industrial pump with Siemens 3kW motor. A robust, professional unit designed for use in industrial installations, water circuits, and technological systems. ⚙️ Technical specifications: - Pump manufacturer: Sterling Fluid Systems - Model: ZTIC 040160 - Type: AA ODC B2 KX - Motor: Siemens IE1 - Power: 3.0 kW - Voltage: 230/400V (3~) - Frequency: 50 Hz - Speed: approx. 2835 rpm - Protection class: IP55 - Insulation class: F - Connection: flanged 🛠️ Features: - Centrifugal pump for water and industrial liquids - Heavy-duty industrial construction - Reliable Siemens motor Cedpfxoyz Dxmo Aa Hjrc - Flanged version – easy installation in piping systems - Designed for continuous operation 📦 Condition: ✔️ Used ✔️ Very good technical condition ✔️ Freshly painted ✔️ Normal signs of use visible 📌 Applications: - Industrial systems - Heating and cooling systems - Water circulation - Manufacturing plants - Agriculture 📦 Set includes: - Pump with Siemens motor - As shown in the photos 🚚 Shipping: - Shipping by courier or pallet possible - Personal collection also available - Assistance with transport arrangements is offered

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2003, loading space length: 13,250 mm, loading space width: 2,550 mm, loading space height: 3,200 mm, loading space volume: 50 m³, total length: 13,250 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 385/65-R22.5, color: white, Year of construction: 2008, Equipment: ABS, = Additional Options and Equipment = - ADR (European agreement for the international transport of dangerous goods by road) - BPW axles - EBS (Electronic Braking System) - Lift axle - Alloy wheels - Air suspension - Disc brakes = Notes = Fluid chassis, year of manufacture 2008, with GOFA tank body, year of manufacture 1991, single-compartment tank semi-trailer with a capacity of 50,000 liters for butane/propane/gas, ADR (FL, AT), tank inspection valid until 03/2028; leak test valid until 02/2031. ABS/EBS, BPW axles with disc brakes, 1st axle is a lift axle, Alcoa wheels, test pressure 28 bar, tires 385/65-R22.5 (tread depth L: 10/10/9 mm; R: 16/10/14 mm), unladen weight: 12,000 kg, gross vehicle weight: 35,000 kg, German registration with valid technical inspection until 31/05/2026. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle make: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; lift axle; max. axle load: 9,000 kg; left tire profile: 65%; right tire profile: 95% Rear axle 2: Alloy wheels; max. axle load: 9,000 kg; left tire profile: 65%; right tire profile: 65% Rear axle 3: Alloy wheels; max. axle load: 9,000 kg; left tire profile: 55%; right tire profile: 90% Weights Unladen weight: 12,000 kg Payload: 23,000 kg Gross vehicle weight: 35,000 kg Functional Body make: GOFA Gocher Fahrzeugbau GmbH GAZTANK 50,080L Number of compartments: 1 Credpfjy Aag Nsx Aa Hjc Condition Technical condition: very good Cosmetic condition: very good Further information Please contact Arne Honingh for more information.

Year of construction: 2012, condition: used, machine/vehicle number: A12H10492, Lasers, barcode scanners, position scanners, barcode scanners -Manufacturer: Accu-Sort, barcode scanner Credpjh Eckaefx Aa Hoc -Type: Axiom-X -Dimension: 360/220/H410 mm -Weight: 11 kg

Condition: ready for operation (used), Accu-Sort-Systems 45L Laser Barcode Scanner, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Cjdpfx Aaji D Ttdj Hsrc

Year of construction: 2024, operating hours: 150 h, condition: used, functionality: fully functional, overall weight: 9,600 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0704, SENSOR IDENTIFY is an induction sorter that separates input materials based on their electrical conductivity. If required, it can also be equipped with a color camera system to additionally detect shape and color. This enables versatile and precise sorting of materials with different electrical conductivities, such as metals and non-metals. The ejection of detected particles is carried out using compressed air. This module is part of our rental fleet. Codpjxgc Iusfx Aa Hjrc

Condition: used, Year of construction: 2022, operating hours: 289 h, functionality: fully functional, machine/vehicle number: B0201, total width: 2,450 mm, total length: 6,050 mm, total height: 2,700 mm, empty load weight: 9,600 kg, Our FEED VIBRO features a combination of feed hopper, leveling roller, and dosing slide, ensuring consistent material feed. Thanks to the integrated drum magnetic separator with selectable strength, magnetic particles can be sorted. If pure dosing without magnetic separation is required, the magnet system can be deactivated. Csdpfx Aajxrtt Ss Herc This module is part of our rental fleet.

Year of construction: 2022, operating hours: 975 h, condition: used, functionality: fully functional, overall weight: 9,600 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0501, The MAGNETIC DRUM consists of a two-stage drum magnetic separation system designed to remove all magnetic particles from a material stream. Because the intensity of both magnetic drums can be selected and each drum can be activated or deactivated as needed, this module is highly flexible and can always be adapted to the specific properties of the feed material. The dual magnetic separation enables higher purity levels while maintaining constant throughput. This module is part of our rental fleet. Cjdpfx Aajxt Dqqo Hjrc

Year of construction: 2023, operating hours: 343 h, condition: used, functionality: fully functional, overall weight: 10,300 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0302, This module is suitable for nearly all materials (including moist or highly abrasive materials). Perfect technical screening even at high throughputs is achieved through the combination of 3D screening panels on the upper deck and tension mat technology on the lower deck. This combination enables almost blockage-free screening at accelerations of up to 50G – keeping your screening panel clean at all times. This machine is part of our rental fleet. Crjdpfxoxgda Es Aa Hsc

Year of construction: 2022, operating hours: 596 h, condition: used, functionality: fully functional, overall weight: 10,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0402, EDDY ACTIVE is an eddy current separator with an eccentric pole wheel for metal sorting. The magnetic system enables highly efficient separation of non-ferrous metals from various waste streams thanks to its exceptional strength. • Very powerful eccentric magnetic system • Automatic splitter adjustment • Integrated belt tracking control • Rotating belt scraper • Robust and compact design • Low maintenance Cjdpfx Aaoxgdg Ee Herc This module is part of our rental fleet.

Year of construction: 2021, operating hours: 1,513 h, condition: used, functionality: fully functional, overall weight: 11,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B205, Our robust FEED HOPPER is specifically designed for the precise dosing of challenging, hard-to-meter feed materials. Equipped with a plate belt, the hopper reliably handles abrasive or coarse-grained materials. With a capacity of 7 m³ and an optionally integrable leveling roller, the feed rate can be adjusted. Crodpfxjxta D To Aa Hoc This module is part of our rental fleet.

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: presumably SRC-N 250-2R Year of manufacture: approx. 2000 Bowl diameter (bottom): 250 mm Bowl diameter (top): 380 mm Bowl internal height: approx. 90 mm Crodpfx Aszbhuqsa Hec Sorting track width: 30 mm Overall height (drive + bowl with sorting track): 405 mm Oscillation frequency: 100 Hz / 6000 min-1 Mains connection: 230 volts, 50 Hz - Control unit RNA, type ESG 90 for adjustable vibration speed - Vibratory bowl with rubber coating - The conveyor was used for feeding automotive fuses Space requirement Ø x H: 430 x 405 mm Weight: 38 kg Good condition A spiral conveyor always consists of two essential components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: used, Year of construction: 2024, Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL Cjdpfx Asy U Ihxja Herc

Year of construction: 2022, condition: used, machine/vehicle number: S100/80.1, Machine weight approximately 2,300 kg, consisting of: machine base body, industrial articulated-arm robot KUKA Cybertech-2 KR 16 R1610-2, year of manufacture 2022, serial number: 1305737, KUKA controller KR C4, serial number: 3085496, operator panel, 3D scanner PHOTONEO PhoXi L, serial number: 2018-02-010-LC3, controller SIEMENS Simatic Panel Touch. Crsdoy T Nz Ropfx Aa Hsc

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-N200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 250 mm Bowl diameter (bottom): 190 mm Bowl internal height: approx. 45 mm Sorting track width: approx. 3 mm Overall height (drive + bowl with sorting track): 240 mm Power connection: 230 volts, 50 Hz - Conveyor spiral made of metal Space requirement Ø x H: 260 x 240 mm Cedpfx Aey Tpttoa Hjrc Weight: 13.5 kg Good condition Matching control units with suitable connection plugs are available under stock numbers: 61867, 61866, 61856, 61858, 61889.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, TRI OPTIQUE Manufacturer: PELLENC Type: M 2800 BB HR Working width: 2,800 mm Option installed in June 2024: separator for all types of metal, including stainless steel, metal sensor. New belt. The machine is capable of sorting all types of plastic by quality, all metals including stainless steel, and wood. The machine has just been serviced. Feeding system: Manufacturer: SINEX Type: MU 75 6500 Power: 2 x 3 kW Output conveyor 1: Manufacturer: RMIS Output conveyor 2: Manufacturer: ARVAL Cjdpfjyy Aa Tsx Aa Hsrc

Condition: used, Year of construction: 2022, operating hours: 184 h, functionality: fully functional, Zum Verkauf stehen zwei gebrauchte Modula VertikalLift MC25D in der Version 1.4. zu je 39950€ netto. Beide Anlagen sind voll funktionsfähig, wurden regelmäßig gewartet und können nach Absprache im laufenden Betrieb besichtigt werden. Ideal zur platzsparenden und effizienten Lagerung von Kleinteilen, Ersatzteilen oder Kommissionierware. Anbei die Spezifikationen der beiden Maschinen, Baujahr 2022, je nur 23 Tage Betriebszeit. Modell: Modula VertikalLift MC25D, Version 1.4 Anzahl: 2 Lifte Baujahr: 2022 Betriebszeit: je ca. 23 Betriebstage Codpfxjyx U I Ts Aa Hjrc Abmessungen zusammen in mm: 6300 (l) x 7300 (h) x 3000 (b) Zustand: gebraucht, technisch einwandfrei Verwendung: automatisches vertikales Lager- und Kommissioniersystem Einsatzbereich: Lager, Produktion, Versand, Ersatzteillager Kosten / Organisation: 3000 * 6300 * 7300 Abbau: ca. 6.000 € durch Hersteller Transport in DE: ca. 2.000 € Abbau und Transport können nach Absprache über Modula bzw. spezialisierte Dienstleister organisiert werden, Koordination unterstützen wir gern. Wartungsprotokolle vom 17.10.2025 vorhanden

Condition: used, Working width: approx. 1000 mm Cedpfxjy Rvqys Aa Hsrc

Year of construction: 1994, condition: used, machine/vehicle number: RX 1020 FF 4C - 146.2048.4, We are offering this used PULSARR (Best / TOMRA) RX 1020 FF4C optical sorting machine, including a vibratory infeed conveyor, manufactured in 1994. Manufacturer: PULSARR (BEST / TOMRA) Year of manufacture: 1994 Machine number: 94014 Serial number: 146.2048.4 Type: RX 1020 FF4C Working width: 1200 mm Up to now, the machine has been used to sort potato cubes of 10 x 10 x 10 mm. Capacity: 3.5 - 5 t/h. Foreign objects and black spots were sorted out. In July 2007, the machine received a Pollux computer upgrade! (equivalent to the current Genius model) Then, in 2015, the Pollux software was upgraded again. This means that the frame and conveyor belt remained, but the complete camera optics and the majority of the control system were replaced with the latest technology, which corresponds to the successor model, the Genius. The machine has been cleaned, visually refurbished, and faulty electronic components have been professionally replaced. The machine has been stored for approximately 3 years. Our offer refers to a used machine including a vibratory infeed conveyor, without any warranty, and without installation or commissioning. If you have any questions or require further information, please feel free to send us a message or call us. Credpfxoy Tzf Io Aa Hoc

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Crjdpfsuzn Nnex Aa Hjc Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Various pistons / cylinders available. Crjdpoy R Nu Eofx Aa Hec Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Crodpfx Asy N Dvbea Hec Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.