Used 5 Axis Vertical Machining Centre for sale (71,330)

Year of construction: 2007, Condition: good (used), OKK VP 400 5 AXIS VERTICAL MACHINING CENTRE MAKE OKK MODEL VP 400 YEAR 2007 CONTROL FANUC 310IS A5 TABLE SIZE DIA. 350.0 mm TABLE LOAD 200 KGS TRAVERSES (XYZAC) X: 600.0 mm Y: 410.0 mm Z: 460.0 mm A: -120 to +30 degrees C: 360 degrees SPINDLE SPEED 100 – 12,000 RPM SPINDLE TAPER 7/24 # 40 SPINDLE NOSE TO TABLE 150 – 610.0 mm SPINDLE MOTOR 22/18.5 kW RAPID TRAVERSE RATE: (X, Y, Z) 48/48/36 m/min ATC 30 stations SPINDLE TAPER BT 40 MAX. TOOL LENGTH 300.0 mm MAX. TOOL WEIGHT 7 KG TOOL CHANGE TIME 1.2 SEC PLUS BIG PLUS BT 40 SPINDLE 2 SPEED TOOL CHANGER CERAMIC SPINDLE BEARINGS SIMALTENOUS 5 AXIS THROUGH SPINDLE COOLANT RENISHAW MP10 PROBE RENISHAW MEASUREMENT TWIN AUGER CONVEYORS SPINDLE CHILLER Ckhiefeky8

Year of construction: 2003, Condition: good (used), Traverses X Y Z: 810 x 610 x 500mm, Table 350mm diameter, C axis (rotary) 360o, A axis (Tilt) +30o/-120o, Spindle speed 12000 rpm, Spindle taper BT40, Spindle Motor 13kW, Rapid feedrates 43m/minute, Heidenhain TNC530, 30 Station side arm ATC, Bq8C8X9G Coolant, Low Volt light

Condition: as good as new (ex-display), Year of construction: 2023, Operating hours: 15 h, YCM UV650 K9P3Fwr8 Spindle: SK40 / 15.000 rpm, 17kW toolchanger places: 60 control: Heidenhain TNC640 travel: X:620mm Y:520mm Z:460mm B:-50 / +110 C:360 spindle cooling system Blum laser for tool length measurement 3D probe el. hand wheel Emulsion cooling ICS 20bar outer cooling cooling gun chip conveyor machine dimensions: L:4250mm W:2310mm H:2.560mm weight: appr. 12.500kg

Year of construction: 2016, Condition: like new (used), Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, max table weight 300kg, table tilt +120°, -35°, 22.4kW, 15000rpm, BT40, 40 station tool changer, Cq0Sftmz8T coolant, Tool Setter, Programmable coolant, swarf conveyor, through spindle coolant, high speed machining , wips system.

Condition: excellent (used), Spindle speed (max.): 12,000 rpm, We have for sale a 5-axis machining center by DMG DMU 125 duoBLOCK. The machine is in perfect technical condition. The spindle was replaced in 2022 (the machine has worked about 2000 hours on the new spindle). New machine hydraulics this year. Workpiece probe included in the price. Spindle cooling Kv8V2Dzxy X1250 Z1000 Y1000 Iso 40 12,000 spindle revolutions Table: 1250 x 1000 Heidenhain iTNC 530 After measurements, most items with micron vanes!!! We can provide complete delivery including installation.

Year of construction: 2002, Condition: excellent (used), FIDIA K197 CNC Machining Center ​in very good and working condition​.​ Iuis707Tn

Condition: used, Year of construction: 2000, CNC Vertical Machining Centre with 4th/5th axis CNC control Heidenhain TNC 426 Table size 920 x 380 mm. Movement x-Axis 560 mm. Movement y-Axis 350 mm. Movement z-Axis 610 mm. Spindle motor 10,2 kW 4th Axis (Rotary table) Fehlmann ATS 160 CNC-SDK Number of tools in magazine 24 pieces. Maximum spindle speed 10.000 R/pm. Dcvyimhfs Tool taper SK 30/DIN 69871A If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2006, Strokes : X :1600 x Y : 700 x Z : 850 mm Cznwxk7Ehm CNC Sinumeric Siemens Number of hours : 19000 hours . Further information on request .

Condition: used, Year of construction: 1987, x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze Cz9A2Xejrk number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min interface: control voltage: 110/220 V max. torque on the spindle: total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination

Condition: excellent (used), Year of construction: 2018, Travel distance X-axis: 650 mm, DMG DMU 50 3rd Gen 5-Axis CNC Universal Milling Machine with swivel rotary table, Fitted with Celos Siemens control, PH150 10- Pallet Pool, 15,000 RPM, Spindle and in super condition! 5-Axis Machining with up to 20,000 rpm speedMASTER 15,000 rpm Swivel Rotary Table for 5-Axes Simultaneous Machining Table load up to 300 kg Swivel area of the B-axis -35°/+ 110° for highest flexibility Cooled table bearings for highest precision Tool magazine with 60 pockets Bxuqdbwooa Loading of tools from the front even during machining direct driven ball screw drives direct path measuring systems in all axes Fitted with Renishaw probing, extended 60 tool ATC and DMG PH 170 10 pallet system, HP coolant and swarf management system. XYZ strokes: 650x520x475mm YOM 2018

Condition: excellent (used), Year of construction: 2017, Machine/vehicle number: 1135513, SPECIFICATION Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm Dpfqq7 B axis tilt +110 deg -35 deg C axis rotation 360 degree Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X,Y,Z axis 30.5m/min Rapid feed rate B,C axis 150 degrees a second Toolchanger capacity 40 + 1 tools Approx. weight 8900kg   MACHINE EQUIPPED WITH:- Haas CNC control system Through spindle coolant, with auxiliary filtration Swarf conveyor Renishaw wireless Intuitive Probing System Lighting Enclosed guarding

Condition: used, Year of construction: 2013, Alzmetall GS 650 - 5FDT Dpb07P Year of manuf. : 2013 Control : Heidenhain TNC 640 Speed : 12000 rpm Movement X/Y/Z : 650/650/550 mm Tool holder : HSK 63 _____ Description: In General: Year of manufacture:2013 Control:Heidenhain TNC 640 Travel X/Y/Z:650/650/500 mm Speed:12,000 rpm Interference circle swivel bridge:800 mm Turning function:800 rpm, 300 kg Spindle: Technology:Motor spindle Speed:12,000 rpm Tool holder:HSK-T63 Turning function:Spindle clamping NC-swivel table: A-axis:+/- 120°, 0.001° resolution Drive:Tandem, 2x torque motors C-axis:360°, 0.001° resolution Drive:1x torque motor Clamping surface:470 mm Turning function:800 rpm Table load:max. 300 kg (500 kg) Tool magazin: Technology:Chain magazine Tool changer:Pick-up Number of stations:63 pieces Equipment: Turning function:800 U/min Measuring systems:Direct in all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 40 bar Tool measurement:Tool measuring probe Workpiece measurement:Infrared measuring probe Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: excellent (used), Year of construction: 2018, 5-Axis horizontal machining center with pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Feeds X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 B8Dj3Dkqzu Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazine. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234

Condition: excellent (used), Year of construction: 2018, Machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Bm0K8Hitje Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: used, Year of construction: 2006, DMG DMU 100 monoBlock Year of manuf. : 2006 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 1150/710/710 mm Tool holder : HSK63 _____ Description: Spindle: Technology:Motorspindle Speed:18.000 rpm Power:28 kW Torque:121 Nm Taper:HSK-A63 NC-Swivelhead: B-Axis:0,001° Swivelrange:-120°/+30° NC-Roundtable: C-Axis:0,001° Clamping surface:ø800 mm In general: Toolmagazine:2x 16 stations Rapid travers in X/Y/Z:30 m/min Clamping surface static table:1.500 x 795 mm Table loading (max.):800 kg Equipment/Accessory: Position sensor:Direct scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure, 40bar Workpiecemeasurement:Preparation, Infrared-Touchprobe, m&h Toolmonitoringsystem:Brankamp Oilmistseparation:Electrostatic extraction Setup operations:Operation mode 4 Dpdgu2 Further Accessory:Misc. Toolholder, Rinsing pistol

Condition: excellent (used), Year of construction: 2007, 5-Axis Horizontal Machining Centre for complex heavy-duty machining Heller MCH 450 C Year 2007 Siemens Sinumerik 840C Number of pallets: 2 : Twin pallet changer Pallet size: 800 x 1000 mm Pallet load: max. 2500 kg Pallet changing time: 27 sec. NC Rotary table 4th axis : B 360000 x 0.001° NC Tilting milling head 5th axis: C 360000 x 0.001° Traverses: X 1600 mm Y 1200 mm Z 1700 mm Feeds: X/Y/Z 1-40000 mm/min. Rapids: X/Y/Z 40000 mm/min. Spindle taper: ISO 50 DIN 69871 Spindle front bearing ID: 100 mm Spindle drive motor: 28 / 43 (100% / 40% ) KW Spindle speeds: 45 ~ 6.000 rpm Spindle torque: max. 536 / 822 (100% / 40%) Nm 9Vizyfgfow Tool taper: ISO 50 DIN 69871 Tool magazine positions: 100 Tool diameter with/without adjacent tools: max. 112 / 228 mm Tool length: max. 600 from spindle nose mm Tool weight: max. 25 kg Chip-to-chip time (H) : approx. 8.2~12.2 sec. Machine weight: approx. t.b.a. kg Machine dimensions: L x W x H t.b.a. mm x mm x mm Equipped with: 5-Axis simultaneous machining 4th axis NC Rotary table 5th Axis NC swivelling milling head Twin pallet changer 100-station tool magazine Linear measurement scales X,Y,Z axes Tool measurement and tool breakage control Coolant through spindle 50 bar Chip conveyor Proposal Number MH-6298

Condition: used, Year of construction: 2005, DMG DMC 80 U duoBLOCK Year of manuf. : 2005 Control : Heidenhain iTNC 530 Speed : 8000 rpm Movement X/Y/Z : 800/800/800 mm Tool holder : SK 50 _____ Description: Spindle: Technology:Gear spindle Speed:8.000 rpm Power:28 kW Torque:727 Nm Taper:SK 50 Swivel head:B-Axis - 0,001° Media feed through:Coolant + Blast air NC rotary table: C-Axis:0,001° Speed tabletop:30 rpm Holding torque:5.000 Nm Clamping surface palett:ø800 x 630 mm Tableloading (max.):1.200 kg In General: Toolmagazin:120 stations Rapid traverse in X/Y/Z-Axis:60 m/min Boejhc9Frqy Equipment: Position sensor:Direct scales in all Axes Workpiecemeasurement:Touch probe, Infrared Toolbreakagecontrol:Mechanic Setup:Operation mode 4 Coolingmanagement:Internal cooling unit with paperbeltfilter, 40 bar Chipmanagement :Chip conveyor Extraction :Mechanic, Brand ifs Media supply through spindle :Switching coolant/blow air Paletts :2 pieces : :

Condition: excellent (used), Year of construction: 2017, 5-Axis Horizontal Machining Centre. MCM Tank 5-Axis. Year 2017. Siemens 840D sl. 2 x Station Pallet Changer 630 x 800 mm. Pallet load max. 1500 kg. NC-Rotary table. Rotary axis C-Axis 360°/0.001°. NC-Swivelling head (swivelling in Y-Plane). Swivelling axis A-Axis +80°/-95°. X 1300 mm. Y 1400 mm. Z 1400 mm. Rapids X,Y,Z to 50.000 mm/min. Workpiece swing diameter max. 1400 mm. Workpiece height max. 1300 mm. Spindle taper ISO 50. Spindle drive motor rating 40/52 KW. Spindle speeds max. 10000 rpm. Torque at the spindle max. 298/388 Nm. Tool magazine 199 Positions. Tool length max. 470 mm. Linear scales X,Y,Z Axes. Chip conveyor. 4-colour signal lamp Full guarding. Bvsxvdotcx Workpiece shower. Tool cone cleaning. Oil skimmer. Temperature compensation for the electro-spindle. Tool monitor. High pressure coolant through the spindle 65 bar. Renishaw probe RMP 60. Tool balanace control. Tool measurement Renishaw NC4. Hydraulic lines to the table for hydraulic clamping of fixtures/workpiece. High Tech Machine in excellent condition.

Condition: used, Year of construction: 2022, GROB G350a - PW Year of manuf. : 2022 Control : Siemens Siemens 840 Dsl Speed : 16000 rpm Movement X/Y/Z : 600/770/805 mm Tool holder : HSK 63 _____ Description: Dpb07Z In General: Year of construction:2022 Control system:Siemens 840 Dsl - GROB4Pilot Traverse path X/Y/Z:600/770/805 mm Speed:16,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:16,000 rpm Max. power:approx. 32 kW Max. torque:approx. 206 Nm Tool holder:HSK-63 NC swivel table: A-axis:-185°/+45° C-axis:360° Measuring systems:Direct Clamping surface:400 x400 mm Max. table load:approx. 300 kg Workpiece clamping system:4x fluid connection Tool magazin: Technology:magazine Number of stations:50 Max. tool length:365 mm Equipment: Measuring systems:Direct in all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 40 bar Workpiece measurement:Infrared measuring probe Tool breakage monitoring:Electromechanical Automation:Pallet changer with set-up stations

Condition: excellent (used), Year of construction: 2001, Vertical 3-axis machining center Casbdmttoy Okuma MX45VAE Year 2001 OSP U100M CNC control Table size 1000 x 430 mm X 762mm Y 460mm Z 450 mm Spindle taper BT 40 Spindle speeds up to 7000 rpm. 20 station tool changer New spindle and spindle drive motor in 2019 ! Proposal Number MV-6245

Condition: as good as new (ex-display), Year of construction: 2024, Priminer C 500-5X Year of manuf. : 2024 Control : Heidenhain TNC 640 Speed : 15000 rpm Movement X/Y/Z : 700/550/500 mm Tool holder : HSK A63 _____ Description: In General: Year of construction:2024 Control:Heidenhain TNC 640 Traverse paths X/Y/Z:700/550/500 mm Speed:15,000 rpm Workpiece diameter max.:700 mm Spindle: Technology:Inline direct drive Speed :15.000 rpm Power :33,5 kW Torque :135 Nm Tool holder :HSK 63 NC-swivel table: B-axis:+30° / -120° Cdcyzjc900 C-axis:360° Table diameter:400 x 500 mm Table load max.:300 kg Tool magazine: Technology:Chain magazine Tool changer:Double gripper Number of stations:60 Tool length max.:300 mm Tool diameter max.:125 (80) mm Equipment: Measuring systems:Direct in all axes (glass scales) Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 20 bar Workpiece measurement:Touch probe Workpiece measurement:BLUM laser Set-up mode:Electronic handwheel

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Travel distance X-axis: 800 mm, Travel distance Y-axis: 400 mm, Travel distance Z-axis: 350 mm, Rapid traverse X-axis: 45,000 mm/min, Rapid traverse Y-axis: 45,000 mm/min, Rapid traverse Z-axis: 45,000 mm/min, Controller manufacturer: Siemens, Controller model: 840D, CNC 5-axis vertical machining center with bar machining Stama MC 531/SM Dynamic Power Year of construction 1999 / overhauled in 2017 Siemens 840D control 2-axis NC swivel rotary table: Table diameter: 210 mm Table load: n/v kg Table with spindle nose: ASA 8 Table spindle bar capacity: 20 ~ 80 mm Ø Bar length: max. 800 mm Longitudinal table travel: X 800 mm Transverse spindle travel: Y 400 mm Spindle vertical travel: Z 350 mm Table rotation axis 4e axis (continuous): B-axis 360°/0.001° Table swivel axis 5e axis (continuous): A-axis 105°/0.001° Distance spindle - table: min./max. 265 / 615 mm Cutting feeds: X/Y/Z 1 - 10,000 mm/min. Rapid feeds up to: X/Y/Z 45,000 mm/min. Spindle holder: HSK-A63 C908Mja Spindle drive power: 14/21 kW AC Spindle speeds: 36 - 9,000 rpm. Spindle torque: max. 70 Nm Tool magazine positions: 78-position automatic tool changer Tool holder: HSK-A63 Tool diameter with/without adjacent tools: max. 125 mm Tool length: max. 250 mm Tool weight: max. 12 kg Tool change time: 2.4 sec. Chip-to-chip time: 3 sec. Milling capacity: max. 350 cm³/min. Drilling capacity Ø: max. 40 mm Tapping capacity Ø: max. M 27 Machine weight: approx. 7,200 kg Machine size (not footprint): L x W x H 3,000 x 4,050 x 2,930 mm Accessories: 2-axis NC rotary swivel table. Table as work support for bars up to 80 mm Ø. Max. Bar length 800 mm. Hainbuch gripper (quick connection) diameter 180 mm. Short bar loading magazine. Chip conveyor. Milling spindle Internal coolant supply 70 bar with magnetic filter. BLUM laser tool measurement. Tool holder. Hydraulic tailstock. KNOLL paper filter system. Replacement gripper for the table. Channels for the bar feeder. Overhauled in 2017 including new main spindle Offer number MV-6173

Condition: used, Year of construction: 2020, SHW UniSpeed 3000 Year of manuf. : 2020 Control : Heidenhain TNC 640 Speed : 6000 rpm Movement X/Y/Z : 3000/1300/1300 mm Tool holder : SK 50 _____ Description: In General: Year of construction:2020 Control:Heidenhain TNC 640 Traverse paths X/Y/Z:3,000/1,300/1,300 mm Spindle speed:6,000 rpm Tool holder:SK 50 Workpiece swing diameter:max. 2,400 mm Spindle: Technology:Direct drive Speed:6,000 rpm Max. power:44 kW Max. torque:875 Nm Tool holder:SK 50 BIG-PLUS Media feed-through:Air + coolant Milling head: Technology:Orthogonal milling head A-axis:+/- 90°, indexing 1° Part accuracy:+/- 0.0008° C-axis:+/- 180°, infinitely variable Partial accuracy:0.0016° Clamping torque:20 kN Interface for angle head:3-point support Dpqpah CNC Rotary table: Technology:Rotary table with pallet clamping station B-axis:360°, infinitely variable Part accuracy:+/- 0.001° Pallet clamping surface:1,600 mm Table load with pallet:approx. 8,000 kg Pallet weight:approx. 2,300 kg Tool magazin Technology:Tool Tower - rack magazine Tool changer:Double gripper Number of stations:98 Tool diameter:max. 125 / 250 mm Max. tool length:500 mm Equipment: Measuring systems:Direct in all axes (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Tool measurement:BLUM laser Workpiece measurement:Radio measuring probe Crash and overload detection:SHW UniScan Emulsion mist extraction:2x mechanical separators Automation:Pallet changer preparation Work area door:Automatic Set-up mode:Electronic handwheel Accessories:2x magnetic clamping plate

Condition: excellent (used), Year of construction: 2015, Travel distance X-axis: 650 mm, Travel distance Y-axis: 650 mm, Travel distance Z-axis: 550 mm, Spindle speed (max.): 30,000 rpm, Number of slots in tool magazine: 32, Alzmetall GS 800-5T 5-axis vertical CNC high-precision machining center Year of construction 2015 Heidenhain iTNC 530 CNC control X 650 mm Y 650 mm Z 550 mm 2-axis CNC rotary/tilt table Spindle speeds up to max. 30000 rpm HSK-E25 tool holder Dpm3D9 32-fold automatic tool changer Offer number MV-6238

Condition: used, Year of construction: 2011, Kern Triton Sdc8Qosmkt Year of manuf. : 2011 Control : Heidenhain iTNC 530 Speed : 40000 rpm Movement X/Y/Z : 500/500/400 mm Tool holder : HSK-E40 _____ Description: In General: Year of manufacture:2011 Control:Heidenhain iTNC 530 Traverse paths X/Y/Z:500/500/400 mm Speed:40,000 rpm Tool holder:HSK-E40 Spindle: Technologie:Motorspindel Drehzahl:40.000 U/min Leistung:max. 47 kW Drehmoment:max. 23,6 Nm Werkzeugaufnahme:HSK-E40 NC-Swivel rotary table: Manufacturer:Peiseler Type:ZASD 160 A-axis:-10°/+100° C-axis:360°, Clamping surface:160 mm Clamping system:EROWA Tool magazin: Technology:disc magazine Number of stations:50 Tool changer:Double gripper Equipment: Measuring systems:Direct in all axes Chip disposal:Chip conveyor Coolant supply:IKZ system Workpiece measurement:Renishaw preparation Tool measurement:BLUM laser Oil mist separator:Electrostatic Set-up operation:Electronic handwheel