Used Bystronic Tpa H for sale (55,621)

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Lodpfsd N Erpsx Ahzerl Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Lsdpfx Ahjwn Hfijzsrl Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Weight: 18,900 kg + Tools The machine is not fully operational; the right-hand cylinder is leaking; the machine descends unevenly; the hydraulic pump is noisy

Year of construction: 2007, condition: good (used), Used Bystronic Model VR – 3100mm x 6.5mm guillotine for sale Make: Bystronic Byshear Model: VR 6.5-31 Ledeq Dpuhspfx Ahzerl Cutting capacity: 6.5mm Cutting length: 3100mm Rake angle 0.5-2.5 Back gauge range 1200mm Max Back gauge speed 180 mm/s Hydraulic Variable Rake Guillotine Shear. Including cnc control CYBELEC DNC 60 Programmable Back Gauge. Auto Blade Gap Adjustment. Front Supports & Squaring Arm. New/year 2007 Bystronic vr 6.5 x 3000 – 3metre x 6mm guillotine for sale

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Lrjdpfx Asnyhvqjhzjl Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: used, • Load capacity 150 kg Lrjdpjwcm U Hofx Ahzjl • Year of manufacture 2013 • Maximum pane/frame size – 1500 x 2400 mm • Machine no. – L-220.1743 • Price upon request

Condition: good (used), Year of construction: 2014, Lifting capacity: 1100 kg Lrjdpfox R Spfsx Ahzol Net weight: 175 kg

Condition: good (used), Year of construction: 2016, Lifting capacity: 1100 kg. External dimensions: Width: 3100 mm. Height: 1700 mm. Depth: 600 mm. Weight: 140 kg. Condition: good, second-hand Lrjdpfxexyqrns Ahzsl

Condition: good (used), Year of construction: 2015, Lifting capacity: 500 kg. Dimensions of the goods: Width: 2300 mm. Lrsdpfoxw H E Sex Ahzel Height: 1600 mm. Depth: 320 mm. Weight: 80 kg. Condition: good, second-hand.

Condition: good (used), Year of construction: 2013, Lifting capacity: 300 kg. External dimensions: Width: 1000 mm. Height: 1500 mm. Depth: 400 mm. Lodpfxjxyqp He Ahzerl Weight: 50 kg. Condition: good, second-hand

Condition: good (used), Year of construction: 2002, Lifting capacity: 1100 kg. Includes 2 plug-in additional suction devices and storage rack. External dimensions: Lrjdpfx Aexyqpashzol Width: 1950 mm. Height: 1800 mm. Depth: 300 mm. Weight: 146 kg. Condition: good, second-hand

Condition: good (used), Year of construction: 2014, Lifting capacity: 550 kg. Weight: 100 kg. Condition: good, second-hand Lrodpfx Asx Dtfrehzsl

Condition: new, Year of construction: 2019, Hello, for sale is a new spare part for a Bystronic table: CUTTING HEAD HUB10 ART. B-017530-V03-A. Lrodpfoygl Dtsx Ahzsl

Condition: excellent (used), mileage: 380,592 km, power: 353 kW (479.95 HP), first registration: 08/2014, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: other, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 12,000 kg, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Power brake booster - Speed limiter - Refrigerator - Air suspension - Media system - Particulate filter - Sun visor - Toolbox - PTO (power take-off) - Central lubrication - Towing hitch = Further Information = Axle configuration Brakes: disc brakes Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steering; Suspension: leaf suspension Front axle 2: Tire size: 315/80/22.5; Max. axle load: 9,000 kg; Steering; Suspension: leaf suspension Rear axle 1: Tire size: 315/80/22.5; Dual tires; Differential lock; Max. axle load: 12,000 kg; Suspension: air suspension Rear axle 2: Tire size: 385/65/22.5; Lift axle; Max. axle load: 8,000 kg; Suspension: air suspension Weights Empty weight: 26,875 kg Payload: 10,125 kg Gross vehicle weight: 37,000 kg Functional Mast: Telescopic (10 sections) Mast length: 26.3 m Lifting capacity: 16,900 kg Lifting height: 2,630 cm Crane: PALFINGER PK92002-SH H, year 2014, mounted behind the cab Body manufacturer: PALFINGER PK92002-SH H CE marking: yes Condition Technical condition: very good Visual condition: very good MAN MAURER TGS 35.480 8X4H-6 BL WITH PALFINGER PK92002-SH H CRANE EURO 5 | L PACKAGE | 480 HP DRIVE 8X4H-6 BL WHEELBASE 530 CM LEAF / AIR SUSPENSION SLEEPER CAB WITH AIR CONDITIONING, REFRIGERATOR MEDIA SYSTEM, PHONE PREPARATION MANUAL GEARBOX TRAILER HITCH STROBE LIGHT FRONT AND REAR TOOLBOX LOADING DIMENSIONS: L=545CM, W=247CM PALFINGER PK92002-SH H 10X HYDRAULIC EXTENSIONS PALFINGER WINCH KBW007-A 18M Lodpfx Aeyiupdehzjrl TOTAL 5X JIBS CRANE CAN WORK IN FRONT OF THE CAB VIA 1X FRONT JIB RADIO REMOTE CONTROL MAX. LIFTING CAPACITY AT 4.3M: 16,900 KG MAX. WORKING HEIGHT: 26.3M

Condition: new, empty load weight: 652 kg, maximum load weight: 2,848 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, loading space volume: 2.5 m³, color: silver, construction height: 940 mm, working width: 2,060 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanizing, Unbraked, Composite floor / honeycomb core - Extremely robust and weather-resistant, * IMMEDIATELY AVAILABLE * Composite floor / honeycomb core - Extremely robust and weather-resistant Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3.500 kg - Unladen weight: 652 kg - Payload: 2,848 kg - Interior dimensions: 405 x 200 x 30 cm (L x W x H) - Exterior dimensions: 561 x 206 x 94 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13C steel rims / KNOTT parabolic suspension + 100 km/h - Brakes: yes - Support wheel: yes, automatic - Incl. Vehicle documents (letter) - 100 km/h at extra charge Standard equipment: - New dropside hinges incl. welded-on hooks for attaching a cargo net, among other things. - Aluminium drop sides with robust built-in locks - Anodized double-walled aluminium drop sides - All drop sides can be folded and removed - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, grid attachment, drop side attachments or front wall extension - Sturdy eccentric locks - Composite floor is extensively tested, The honeycomb structure consists of glass fibers and polypropylene-coated thermoplastic composites - This is a high-tech composite material made of long glass fibers in a polypropylene (PP) matrix. - Sturdy, lightweight and wood-free, making it sustainable and recyclable - Conditions of use tested in detail for impact and tensile strength, shear force, wear and resistance to weather conditions, among other things. - Reinforced stable bolted V-drawbar - very stable welded steel frame - frame completely hot-dip galvanized - many cross beams therefore high point load - additional longitudinal struts continuously welded in - all cross and longitudinal beams lie on the floor - 8 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - U-profile at the rear for easier attachment of the ramps - Cargo net hooks on the lower hinge sections - Parabolic spring axle from KNOTT - Wheel shock absorbers for 100 km/h fitted - Parabolic spring axle for absolute driving comfort! - Automatic reverse drive - KNOTT overrun device and parking brake - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic support wheel in the middle Special equipment included in the price: - Low chassis, 195/50R13C tires, loading floor height: 64cm Accessories optionally available, as partially shown in the pictures: - High front grille, 70cm - Tarpaulin + bows - Supports, grilles, side wall attachments, nets, etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lodpfxju Skr To Ahzerl

Condition: used, maximum load weight: 6,470 kg, overall weight: 9,500 kg, axle configuration: 2 axles, first registration: 10/2001, next inspection (TÜV): 06/2026, loading space length: 6,150 mm, loading space width: 2,460 mm, loading space height: 2,350 mm, loading space volume: 35 m³, Equipment: ABS, * ABS * BPW axles * 5-chamber rear lights * Height-adjustable coupling device via offset plate * Front support ----Body: flatbed, sliding curtain left + right, 2-piece aluminium sideboards (600 mm), foldable centre post, hardwood floor, lashing rings. Loading height approx. 1,000 mm Ledpfx Ahsx En H Njzjrl Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!! ALL INFORMATION WITHOUT WARRANTY, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations.

Condition: new, Press brake tool/upper punch for Bystronic press brake P5 RFA Style 30 degree H250mm R1.0mm Flexible length of L500mm, L508mm L515mm, L550mm in segment Lrodpfx Asiim Dwehzel

Condition: new, Press brake tool/upper punch for Bystronic press brake Lrodpfxokuz E Re Ahzjl P7 RFA Style 30 degree H250mm R3.0mm Flexible length of L500mm, L508mm L515mm, L550mm in segment

Condition: excellent (used), functionality: fully functional, 1 x Contact Packing Ltd pallet stretch wrapper with fold-down mast. The Exp-403 is an entry level premium machine. The operator has full control over how many wraps are applied to the top and bottom of the pallet giving you full control over how much film you apply to the pallet, something you would associate with machines costing much more. Excellent build quality, durability and user friendly. Model – EXP-403. Serial number – P1411T620. turntable dimensions - 1650mm diameter. Maximum wrapping height - 2200mm. Electrical requirements - 230 V / 50 hz / 1 phase. Power - 3.8 A. This stretch wrapper has the following features: Ledpey N Sktefx Ahzjrl - Home position: the turntable always stops at the same position. - Adjustable speed control on turntable (1-10rpm). - Choose between 1 & 9 top and bottom wraps with re-enforce wrap. - Up & down or up only wrap cycle. - Spring break stretch. Video available on request.

Condition: excellent (used), functionality: fully functional, overall weight: 113 kg, total length: 1,200 mm, total width: 600 mm, total height: 1,867 mm, input voltage: 240 V, input current: 32 A, type of input current: three-phase, input frequency: 60 Hz, HPE G2 Enterprise Rack Cabinet – 42U | 120 cm x 60 cm | High Capacity & Performance Lsdpfxjxy Iv De Ahzerl Discover the Hewlett Packard Enterprise G2 Enterprise Rack Cabinet, a rack solution designed to provide reliability, durability, and full compatibility with HPE server, storage, and networking environments. Engineered for professional infrastructures, this cabinet leverages HPE’s expertise: - Optimized compatibility with HPE servers, networking equipment, and storage solutions. - Supports HPE Foundation Care services, extending support across your entire rack and power infrastructure. - Simplified integration with HPE management tools, enabling efficient and straightforward monitoring of all installed equipment. - Wide range of HPE accessories (KVM, power distribution, cable management options) to build the ideal architecture for your workload. - Easy installation, operation, and maintenance. Technical specifications: - Rack capacity: 42U - Overall dimensions (H x W x D): 200.66 × 130.02 × 59.78 cm - Static load: 3,000 lbs (1,361 kg) - Dynamic load: 3,000 lbs (1,361 kg) - Front door: Black color, lockable recessed handle, silver accents - Frame color: Black - Height: 42U - Depth: 120 cm - Width: 60 cm

Year of construction: 2009, condition: good (used), The Grunwald-HITTPAC AKH-059 is a 3-lane filling and closing machine. A rotary cup filling machine is a type of packaging equipment designed to efficiently fill and seal cups with various products, such as yoghurt, pate, kefir, cream cheese and other similar viscous or semi-liquid substances. These machines are commonly used in the food and dairy industry. Lrsdpfem Ux Tijx Ahzol The machine operates on a rotary system, which allows multiple cups to be filled and sealed simultaneously. The cups move through different stations, each dedicated to specific tasks like cup dispensing, filling, sealing, and capping. Installed cup dimension: 110 x 80mm (150g) Motor and vacuum pumps are protected and installed in the machine frame, underneath the table top. Dimensions: L: 2300 x W: 1800 x H: 2200mm Weight: 1500kg Power: 9kW Efficiency: approx. 2750 – 3750 cups/h (depends on the product consistency)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 26,000 h, machine/vehicle number: R1011250, laser power: 4,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 170 mm, workpiece weight (max.): 890 kg, Laser source and frequency converter have been renewed! Lrodpsy Rt Ezofx Ahzel TECHNICAL DETAILS Working Area and Cutting Area Nominal plate size X: 3,000 mm Nominal plate size Y: 1,500 mm Cutting area X-axis: 3,048 mm Cutting area Y-axis: 1,524 mm Cutting head Z-lift: 170 mm Workpiece weight: max. 890 kg Dynamics and Accuracy Positioning deviation: ±0.1 mm Positioning scatter: ±0.05 mm Edge detection accuracy: ±0.5 mm Positioning speed X/Y-axis (axial parallel): max. 80 m/min Positioning speed X/Y-axis (simultaneous): max. 113 m/min Axis acceleration: max. 4.5 m/s² Laser Source Laser power: 4,400 W Laser source: Bylaser 4400 Possible laser sources: Bylaser 3000 / Bylaser 4400 / Bylaser 5200 ARC / Bylaser 6000 MACHINE DETAILS Dimensions and required space Transport system standard height: 3,650 mm Transport system height to magazine: 4,350 mm Material trolley length: 3,000 mm Additional length for extension magnet: 200 mm Material trolley width: 1,600 mm Material trolley height without plate stack: 917 mm Standard lifting height: 550 mm Lifting height to magazine: 1,150 mm Lifting height with stacked tables: 800 mm Transport data and weights Travel unit with lifting unit: 1,300 kg Vacuum gripper frame with double fork system: 1,200 kg PLC cabinet: 500 kg Material trolley: 800 kg Total transport weight ByTrans 3015: 3,800 kg Equipment and Features Vacuum gripper frame plate thickness (loading): max. 25 mm Vacuum gripper frame plate weight (loading): max. 900 kg Number of vacuum grippers: 42 Weight per gripper: max. 45 kg Compressed air: 6 bar Vacuum: -0.6 bar Double fork system plate thickness (unloading): max. 25 mm Double fork system plate weight (unloading): max. 900 kg Fork travel path: 2 x 790 mm Cutting hours: 26,000 h EQUIPMENT ByTrans 3015 Extended Bylaser 4400 Shuttle table Loading arm Integrated 4th rotary axis Vacuum gripper frame Loading unit with suction gripper frame Double fork system Material trolley Vacuum pump Plate separator Double sheet detection Cassette trolley Air conditioning Control cabinet with signal lamp and emergency stop Safety fence Photoelectric sensors ByTower storage system

Condition: good (used), Year of construction: 2006, Used 3-meter Bystronic press brake Type: PR 150 3100 Capacity: 3100 x 150 tons Y1, Y2, X, R, Z1, and Z2 CNC-controlled Cybelec ModEva 12 CNC control Hydraulic RFA top clamp Ljdpfx Asy Tml Hohzsrl Hydraulic Wila 13mm bottom clamp Includes 1 set of tooling as shown Year of manufacture: 2006

Condition: used, Year of construction: 2023, Opportunity to purchase a 2023 Bystronic Fiber laser with 12000W laser output. Can be inspected under power. Lrjdpeywkrfofx Ahzel Immediately available. Technical specifications and options in the attached pictures. Working dimensions: 3000 x 1500 mm Laser output: 12000W Power on hours: ca 13500h Cutting hours: < 2000h

Condition: used, Year of construction: 2001, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, total height: 3,050 mm, total length: 7,109 mm, total width: 7,805 mm, overall weight: 11,600 kg, table length: 500 mm, table width: 500 mm, controller model: Fusion 640 M, rotational speed (max.): 15,000 rpm, rotational speed (min.): 35 rpm, spindle speed (max.): 15,000 rpm, spindle speed (min.): 35 rpm, table load: 500 kg, Horizontal Machining Centre with Palletech CNC Control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Ljdey Nz Iuopfx Ahzsrl Number of pallets 10x Table load 500 kg Movement X-axis 710 mm Movement Y-axis 610 mm Movement Z-axis 660 mm Table indexing 360 x 1° Spindle Taper DIN 69871A Spindle speed 35 - 15.000 R/min Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2017, pressing force: 41 t, stroke length: 200 mm, overall weight: 4,000 kg, Press brake manufactured in 2017. This Bystronic Xpert 40/1030 features a press force of 400 kN and a bending length of 1030 mm. It includes a ByVision Bending control system and a 6-axis backgauge for enhanced precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 machine we have for sale. Contact us for further details. • Control: ByVision Bending • Backgauge: 6-axis • Interface: OPC Lodjy Tw R Tepfx Ahzorl • Oil cooling system • Safety system: Fast Bend G2 • Electrical: 3-phase 400V / 50 Hz • Main motor power: 7.5 kW • Made in Germany Additional equipment • Bystronic Mobile Bending Robot (Integrated robotic bending cell) • Year of manufacture: 2017 • Electrical: 3-phase 400V / 50 Hz • Power consumption: 3 kW • Pneumatic pressure max: 8 bar • Weight: approx. 1000 kg Technical Specification Bending Length 1030 mm