Used C Frame Hydraulic for sale (66,378)

Condition: like new (used), Year of construction: 1991, Floor space: 1 m x 0.70 m x H 2 meters. Gooseneck 250. Control panel on the left. Machine in very good condition – used very little. Table 400x360. Drawer with opening. Dkjdeyz Dxajpfx Apwsl

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. Dksdpfx Apeig Hzkewel The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening.

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours Djdpfoh Uhqyox Apwekl - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. Dedpfohrakvsx Apwjkl - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: new, Year of construction: 2026, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, functionality: fully functional, input voltage: 400 V, pressing force: 51 t, stroke length: 200 mm, table width: 400 mm, table length: 500 mm, pressing speed: 18 mm/s, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Dkjdjyr D R Njpfx Apwol Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 500 kN (approx. 51 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 19 mm/s Return speed: 18 mm/s Motor power: 4 kW Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Dkodpfx Apsyr Ek Rswol Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Motor power: 3 kW

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the machining of larger components and convenient handling of materials from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. Dkjdpfxeyrr Rke Apwsl C-frame construction – improved ergonomics and better access to the working area. Solid steel frame – ensures durability and operational safety. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – suitable for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 1000 kN (approx. 102 tons) Maximum pressure: 25 MPa Maximum opening: 600 mm Stroke: 300 mm Table dimensions: 700 × 500 mm Throat depth: 250 mm Downward speed: 11 mm/s Return speed: 25 mm/s Motor power: 5.5 kW Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Dedpfx Asfcw Apjpwskl Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm depth 1500mm

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton Dedpfx Apowyplcewjkl

Condition: new, Year of construction: 2025, C FRAME SINGLE ACTING HYDRAULIC PRESS MODEL CFSS100 /100 TON Ram Cylinder Capacity (Ton) 100 Ton / 250 Bar Min. Working Pressure (Bar) 30 Bar Max. Working Pressure (Bar) 250 Bar Main Cylinder Diameter Ø220mm * 1 Pc Auxilary Cylinder Diameter Ø 50*35 mm * 2 Pcs Table size (mm) 800x500 mm Stroke (mm) 400mm Daylight (mm) 500mm Advance Speed (mm/sec) 110 mm/sec Dkedpfx Aowbtihopwol Return Speed (mm/sec) 160 mm/sec Working Speed (mm/sec) 10 mm/sec Motor (Kw) 11 KW Pump (liters) 26 liters / 19 CC Overall Dimension (LxWxH) 1900x1700x2930mm Weight (Kg) 5,500 KG

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 100 t, stroke length: 600 mm, table width: 650 mm, table length: 850 mm, throat depth: 300 mm, Equipment: CE marking, documentation/manual, safety light barrier, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CRONOSSTECH CHCP 100 C-Frame Hydraulic Press is engineered for heavy-duty manufacturing applications, featuring high tonnage capacity, a robust steel frame, and precision operation. Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life with low maintenance cost Applications - Metal forming - Deep drawing and stamping - Cutting and punching operations - Assembly and pressing applications - Automotive and supplier industry Standard Features - Steel frame stress relieved by vibration technique - PLC control and touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand safety control system - Cooling system Dkodpfsyzb Dysx Apwel Technical Specifications – CHCP 100 Press Capacity: 100 Tons Stroke: 600 mm Throat Depth: 300 mm Table – Ram Distance: 700 mm Table Size: 650 x 850 mm Press Depth: 1300 mm Press Width: 650 mm Table Height from Floor: 900 mm Total Height: 2700 mm Main Cylinder Diameter: Ø220 mm Motor Power: 15 kW Weight: 8,500 kg General Information Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Dedpfjcmat Uex Apwjkl Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Dsdey Hqz Sepfx Apwskl Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: used, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1500 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 1100 - Height adjustment [mm]: 750 - Motor power: 3.0kW - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Dkedpsw N Su Dofx Apwel Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,100 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 540 kg Dksdpfxjw N St Hs Apwsl Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 260 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Motor power: 2.2kW - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Dkodpjvvkmbefx Apwel

Condition: like new (used), Year of construction: 2020, machine/vehicle number: C1-140_11, functionality: fully functional, operating hours: 10 h, CrimpOne C1-140 Hydraulic Hose Crimper Dodpsy A Nv Hsfx Apwskl Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/2 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 3 kW Power supply: 380 V Crimps per hour: 850 pcs Length: 600 mm Width: 435 mm Height: 630 mm Weight: 135 kg Noise level: 71 dB(A) Available immediately from stock!

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: C1-140B_11, functionality: fully functional, operating hours: 10 h, CrimpOne C1-140B - Battery-Powered Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/4 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 1.6 kW Power supply: 12 V (DC) Crimps per hour: 250 pcs Length: 460 mm Width: 280 mm Height: 370 mm Dedpfxsy A Nvto Apwskl Weight: 85 kg Noise level: 71 dB(A) In stock, available immediately!

Year of construction: 1990, condition: good (used), Used Bemco 300ton C frame hydraulic press for sale Bed size 1200 x 900 Dkjdpfjg S Uc Djx Apwjl Daylight 1150 Stroke 700 Cylinder dia 300 New c frame presses available for sale 30ton 60ton 100ton 150ton 200ton 250ton and 300ton

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) Dksdpfxjyupulo Apwsl - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Dkjdpfx Apow Tukiswjl Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

Condition: good (used), Hydraulic clamping trolley Type VS. Track width 790 mm. Trolley height 390 mm. With auxiliary trolley HEH or HKE. Dksdpsxwn Rvefx Apwsl

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety Dkedpfxjk S Htxo Apwjl - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Dksdpoyxgr Refx Apwol

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Condition New Stock Number 2796 Dkjdjxwk E Aopfx Apwol Working Width 1000 mm Stroke 380 mm Max Capacity 100ton