C Frame Hydraulic

WMW C FRAME

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system Ijdpfsxdt Umox Ah Ujik CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2010, turning diameter max. 410 mm turning length 1.235 mm control IT / Turn Plus Heidenhain greates pass round over bed 700 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 35 / 45 kW max. Torque 770 Nm spindle head 220 h5 spindle diameter in front bearing 160 mm max. usable bar diameter 95 / 104 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 4.000 min -1 power capacity driven tool-stations 12 kW max. Torque 36 Nm tool taper VDI 40 DIN 69880 turret change time 30°: 0,4 sec. Y - Axis 120 (+/- 60) mm x-axis 300 mm Iijdpfx Ahjvzhiwe Usk z-axis 1.300 mm y-axis +/- 60 mm tailstock 1.200 mm taper of center MK 5 clamping capacity 1.400 daN rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min total power requirement 60 kVA weight of the machine ca. 7,7 t dimensions of the machine ca. 6,0 x 3,5 x 2,5 m CNC - Turning- and Millingcenter GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Tool drive - Direct measuring system - Bar machining package - Connection for bar feed / bar loading magazine

Condition: good (used), machine/vehicle number: 2852, Year of construction: 2006, load capacity: 8,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 1,600 mm, total length: 4,120 mm, total width: 2,220 mm, additional equipment features: Fire extinguisher , Dual tread, Weight system, Equipment: lighting, TCM FD80 from Uniktruck Iederk Rd Nepfx Ah Ueik

Year of construction: 2002, condition: like new (used), machine/vehicle number: 16.34.02, 6 Die 6 Blow Header MULTIPRESS MP610LS Maximum Cutoff diam. (500/Nmm2): 12 mm Max. Cutoff length : 105 mm Max. KO length (die side): 80 mm Isdpfsh Tkrajx Ah Uoik Max. PKO length: 23 mm Max. Speed: 180 ppm

Condition: good (used), Technical specifications: Working length: 3050 mm Max. bending capacity: 30.0 mm Pre-bending: 25.0 mm Number of driven rollers: 3 Top roller diameter: 410 mm Bottom roller diameter: 380 mm Hydraulic folding bearing Extended rollers for profile bending Control panel with digital display Motor power: 40 kW Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 22 tons Iodpfswchplox Ah Ujik Accessories: Side hydraulic bending aids

Year of construction: 2020, condition: new, 7 "Touch Panel Ijdpfx Ahefzb Nis Ujik The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very little use. Iedpovwgnwsfx Ah Usik

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Iijdpfx Ahsd Hxx As Uek Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized control Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for access protection - 3 material support arms with ball rollers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Extremely heavy-duty machine in very robust construction Base machine dimensions L x W x H: 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Transport space required (base machine) L x W x H: 4650 x 2610 x 3200 mm Transport space required (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau. Test cuts possible.

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length Ijdpfx Ahjkvnumj Uoik 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 Iiedjhigmbepfx Ah Uek year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.