Used Cee Plug Ex Protected for sale (18,513)

Condition: good (used), CEE plug -4-pin connector -16 A -Type: GHG 531 7406 V 0 -EX Protected -Weight: 0.5 kg Ncsdpfx Aob A Sf Iodtsr

Condition: good (used), Transformer, current transformer, explosion-proof lamp -Manufacturer: Steel, voltage converter with transport frame Ncodpfx Ajiv A Ecsdtjr -Type: 230 V 24 V see photo nameplate -Protection class: EEx T4 -Accessories: incl. 24V lamp -Dimensions: 740/370/H1020 mm -Weight: 27 kg

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Ncedpfx Asihb Amedter Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: excellent (used), EX protected forklift battery 24V + charger Explosion-proof battery according to 2014/34/EU II 2G Ex eb IIC T6 Gb II 2D Ex tb IIIC T80°C Db BVS 03 ATEX E 266 X Manufacturer: GNB Industrial Power Model: Marathon Classic Designation: EX 24V 3 EPzS 270 Flex Plus Aqua Type: 3 EPzS 0270 SZC Trough no. 57534134010 Rated voltage: 24 Volt Capacity: 270 Ah Number of cells: 12 Weight: 234 kg Acid volume: 34 liters Delivery date: 24.04.2019 Ncsdpfx Aet Sq Erodter Charger Still HFX 24V - 55 A Benning E230G24/55B-HFX 24 V 55 A Applications The traction batteries in the EPzS series are ideal energy storage devices for industrial trucks, cleaning machines, road vehicles, tractors and other electric vehicles with high energy requirements and heavy cyclical loads. Technical features > Robust lead-acid technology with liquid electrolyte > Proven tubular plate technology for a long service life > Fully insulated terminal screws and plugs > DIN and BS sizes according to IEC 60254-2 > Manufactured according to DIN EN ISO 9001 > Environmental management according to DIN EN ISO 14001 > Fully recyclable Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, mileage: 98,700 km, power: 165 kW (224.34 HP), fuel type: hybrid, gearing type: automatic, first registration: 12/2022, next inspection (TÜV): 12/2026, emission class: euro6, color: blue, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, Special equipment: Driving Assistance Package, metallic paint, electrically operated panoramic sliding roof Nsdpfx Asxumnhodtecr Other equipment: Acoustic pedestrian protection (external sound, AVAS), front ambient lighting (LED), traction control (ASR), Ford audio navigation system with AppLink, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors, body styling package, onboard computer, fabric headliner (dark), black roof rails, body-colored roof spoiler, dual exhaust tailpipes, Eco display for fuel-efficient driving (EcoCoach), electric motor 97 kW (hybrid drive), Driver Assistance System: Emergency Brake Assist, Driver Assistance System: Post-Collision System, Driver Assistance System: Pre-Collision System, Driver Assistance System: Lane Keeping Assist, electric windows front and rear with comfort closing, FordPass Connect incl. eCall, ST-design floor mats, luggage compartment cover/roller blind, automatic transmission - ECVT, LED tail lights, induction charging tray for mobile devices, interior mirror with auto-dimming, Intelligent Protection System (IPS), ISOFIX child seat mounts, body: 5 doors, electronic child safety lock, 2-zone automatic climate control, electric tailgate (sensor-controlled opening), digital instrument cluster 12.3-inch display, front headrests 4-way adjustable, charging cable with Schuko plug, steering wheel (sport/leather, ST), steering column adjustable in height and reach, alloy wheels, rear center armrest, engine 2.5 liters - 112 kW (system output: 165 kW) hybrid, My Key (2 programmable vehicle keys), electric parking brake with auto-hold function, front and rear parking sensors, wheelbase 2710 mm, tire repair kit, tire pressure monitoring system, split folding rear seat backrest, foldable rear seat backrest, low-emission according to Euro 6d emissions standard, shift/select lever knob aluminum, black window frames, LED headlights, headlights with switch-off delay, headlight assistant with day/night sensor, driver's seat electrically adjustable (10-way), front passenger seat adjustable (8-way), seat covers/upholstery: synthetic leather / fabric in suede look, front seat heating, left sun visor with illuminated mirror, right sun visor with illuminated mirror, special version 2, sports suspension, sports seats, rear privacy glass (tinted)

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, feed rate X-axis: 7 m/min, workpiece weight (max.): 1,000 kg, working width: 2,500 mm, volume flow: 8,000 m³/h, year of last overhaul: 2025, overall weight: 3,200 kg, type of input current: three-phase, passage height: 210 mm, total height: 2,350 mm, total length: 2,450 mm, total width: 3,500 mm, working height: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam BSH Suppliers, and much more cases. Wherever a solid, straightforward, yet exceptionally well-equipped machine is needed, the DuoFlex Spray surface spray machine comes into play. Spraying doesn’t have to be complicated – not when you have a robust, long-lasting machine (made in Denmark, electronics from Germany – Beckhoff and others) that puts the operator at the center of it all. Everything is intuitive and easy to use, yet you get features you’ll struggle to find elsewhere – or only in significantly more expensive machines. Here are some hard facts about the DuoFlex Spray: 1. Color changes in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer 3. Suitable for both solvent-based and water-based coatings 4. Two fully separated circuits – ideal for solvent/water or clear/topcoat separation 5. Maximum reproducibility – thanks to smart programming that stores all key parameters automatically 6. Quick to learn – after just 4–6 hours of training, even a baker can spray better than a manual sprayer with 10 years’ experience 7. Modular expandability – drying systems, sanding units, preheating, robotic integration – all from a single source 8. Service that speaks your language – our owner spent nearly 10 years as a coatings manager and brings hands-on expertise to your shop. The machines are extremely durable, and if anything should go wrong, we maintain well-stocked spare parts warehouses in both Germany and Denmark Processing dimensions for the DuoFlex Spray: Nsdpfx Ajffc Tyodtjcr 1. Standard: 1,300 mm width × 200 mm height 2. Larger: 1,800 mm width × 200 mm height 3. Up to: 3,200 mm width × 330 mm height Length: from 250 mm up to virtually unlimited. If you want to coat CLT ceiling panels 16, 18, or 20 meters long, we’ll simply build the right handling system for you. Sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and wonder if we can deliver? Then I’ll be happy to help you personally. Best regards, Martin Bruhn Owner, Bruhn Lackieranlagen // Exclusive Sales Partner of Ceetec A/S – Middelfart, Denmark

Condition: excellent (used), Year of construction: 2018, REF: MM5727 1 x Zumex Food Engineering juice extraction and flitration system with elevator. Manufactured completely in stainless steel. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Serial number - 454293.  ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Ncjdet Uircjpfx Adtjr Performance Specification: Sizes     Head Unit     Oranges/MIN     KG/H     L/MIN     L/H 9-10-11     Kit 9     150,35     902,4      6,01     360,84 5-6-7-8     Kit 8     133,68     1145,4     7 ,64     458,22 2-3-4     Kit 7     116,94     2338,8     1 5,59     935,53 Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5m L x 1m W x 2.2m H. CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Ncedpfx Adjnxi H Uotjr Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: excellent (used), For sale: a line pump from the renowned German manufacturer KSB, model ETALINE ETL 032-032-200, complete with Siemens motor. This unit is intended for use in industrial installations, heating and cooling systems, as well as water circuit applications. TECHNICAL DATA OF THE PUMP Manufacturer: KSB Ncodpfeywu Hasx Adtsr Model: ETALINE ETL 032-032-200 Flow rate: Q 4.0 m³/h Head: H 12 m Impeller diameter: 191 mm Rotational speed: 1459 rpm Year of manufacture: 2021 Flange connections MOTOR Manufacturer: Siemens Power: 0.55 kW Voltage: 400 V, 50 Hz Speed: approx. 1440 rpm Efficiency class: IE3 Design: ATEX Ex II 2G Protection: PTC CONDITION Very good condition Complete unit Minor visible signs of storage Technically fully functional APPLICATIONS Industrial process installations HVAC systems Water and liquid circulation Manufacturing plants Explosion hazard zones

Condition: used, Year of construction: 1960, centre distance 1200 mm Ncedpfx Aex U A Igedtsr 550 weight of the machine ca. 2,5 t

Condition: used, Year of construction: 1965, multifix ja centre distance 1500 mm documentation ja Nodpfx Asxylq Eedtecr weight of the machine ca. 3 t

Year of construction: 2005, condition: used, tool adaptor 50 mm driven tools 5 Stück 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Ncedpfsgtyhrex Adtor Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Njdpoxbd U Ejfx Adtscr

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Turning diameter over slide 270 mm Turning diameter in gap 700 mm Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Ncodswu Du Ispfx Adter Mounting main spindle Bayonet 6 Spindle bore 52 mm Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 880 mm, total length: 2,460 mm, total width: 735 mm, Tested forklift battery for your forklift - 80V 6PZS 930Ah - special tray + 1 year warranty + Including aquamatic system + Including end discharge device & REMA 320 connector (other connectors available on request) + Capacity: minimum 90–100% (C5 capacity protocol will be supplied upon delivery) + Year of delivery: 2024 Ncodpfx Adowzvw Ietsr Dimensions: Length: 2,460 mm Width: 735 mm Height: 880 mm Weight: approx. 2,300 kg Suitable for the following models and others: Still MX-X Crown TSP 7000 Bulmor EQN 40-50 Caterpillar EP50N Daewoo B40 X Dimos BMS 30/89 Doosan B45X-5 Doosan B50X-5 Hubtex MQ 45 Hubtex MQ 70 Hubtex MSU 40 Hyundai 50B-9 Hyundai B40-9 Steinbock-Boss WA 15 Kalmar EC 4-500 Kalmar ECD 50-6 Kalmar ECD 55-6 Kalmar ECE 50-6 Kalmar ECF 70-6 Kalmar ECG 55-6 Common battery sizes available; please enquire. Transport possible.

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Njdpfx Adst Hw D Djtscr Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Nedpfxjxdfabe Adtjcr Year: 2020 Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm

Year of construction: 2000, condition: used, machine/vehicle number: 109920, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Ncodpfx Adeycvwijtor The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Njdpfsd Nw Ttsx Adtscr Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: good (used), mileage: 638,957 km, power: 290 kW (394.29 HP), first registration: 05/2018, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,100 mm, total width: 2,550 mm, total height: 3,170 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Alloy wheels - Manual - Standard sleeper cab - Radio/cassette - Lane departure warning system - Fabric upholstery - Blind spot sensor - Xenon headlamp = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 6,784 kg, Gross weight: 18,000 kg, Total fuel tank capacity: 300 liters, Fifth wheel height: 120 cm, Fifth wheel: Fixed, Number of differential locks: 1, Alloy wheels, Suspension type: Air suspension, Cab type: Standard sleeper, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Xenon headlamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 290 kW (389 Hp), Fuel: Diesel, Euro: 6, Transmission type: Telligent, Transmission model: Mercedes Benz, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seating arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: MB, 12-speed, automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steering; Tire tread left: 10 mm; Tire tread right: 10 mm; Suspension: leaf spring Axle 2: Twin tires; Inside left tread: 7 mm; Outside left tread: 8 mm; Inside right tread: 6 mm; Outside right tread: 6 mm; Suspension: air suspension Weights Empty weight: 6,784 kg Payload: 11,216 kg gross vehicle weight (GVW): 18,000 kg Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 4 Financial Information Leasing rate: €316 per month (default, 60 months); Contact us for more information and terms Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simply! • Large, frequently changing inventory • Recognizable quality • Competitive pricing Nsdpfx Adjx Hfb Hjtjcr • Reliable transactions • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates arranged quickly • Expert technical services • The reassurance of 'recognizable quality' • And more… Please visit our website for special offers and a complete stock list: Leasing via Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 649,390 km, power: 290 kW (394.29 HP), first registration: 05/2018, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,070 mm, total width: 2,550 mm, total height: 3,150 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Other Options and Accessories = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed (fifth wheel) - Alloy wheels - Manual - Standard sleeper cab - Radio/cassette - Lane departure warning system - Fabric seats - Blind spot sensor - Xenon lights = Notes = Nsdpfsx Hfbtex Adtscr Number of axles: 2, Configuration: 4x2, Unladen weight: 6,784 kg, Gross weight: 18,000 kg, Total tank capacity: 300 liters, Fifth wheel height: 119 cm, Fifth wheel: Fixed, Number of differentials: 1, Alloy wheels, Suspension type: Air suspension, Cabin type: Standard sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heater (parking heater), Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting: Xenon, Lane departure warning, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 290 kW (389 hp), Fuel: Diesel, Euro standard: 6, Transmission type: Telligent, Transmission manufacturer: Mercedes-Benz, Gears: 12, Power steering, ABS, ASR (traction control), Starter battery, Central locking, Seating arrangement: 1+1, Seat upholstery: fabric, Seat adjustment: manual = Additional Information = Transmission Transmission: MB, 12-speed, automatic Axle configuration Tire size: 315/70R22.5 Brakes: disc brakes Axle 1: Steered; Left tire tread: 9 mm; Right tire tread: 9 mm; Suspension: leaf Axle 2: Dual tires; Left inside: 12 mm; Left outside: 13 mm; Right inside: 12 mm; Right outside: 11 mm; Suspension: air Weights Curb weight: 6,784 kg Payload: 11,216 kg Gross vehicle weight: 18,000 kg Condition Technical condition: good Visual condition: good Damages: none Number of keys: 4 Financial Information Lease price: €316 per month (default, 60 months); Request further information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, model years, and price classes. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Excellent prices • Professional business conduct • Multilingual staff • We understand our customers • Support with import/export and logistics • (Export) registration plates arranged quickly • Expert technical services • The safety of "recognizable quality" • And more… Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send an enquiry on our website. Directly ask about our European warranty package.

Year of construction: 2026, condition: new, Suitable for dressing and profiling diamond and CBN grinding wheels. Nedpfx Adod R Naastecr Accessories: Total enclosure, Rush camera system with high-resolution B / W camera (15x, 30x, 60x zoom), autom. Zoom control, video overlay (CAD drawing on live image) with 22 "LCD monitor and Ruvision software, On-board PC with Windows and 17 "monitor, Glass scale on the linear axes X and Z, 2 machine lights 12 V, Cooling system 30 Liter tank, Automatic delivery and tilting via servomotors, control panel with touch, Automatically starting position at the end of the work process, Central lubrication, Mist extractor. Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wheel transverse stroke 160 mm, grinding wheel longitudinal stroke 120 mm, radius of the grinding wheel 0 - 60 mm, dressing wheel 175 x 12 x 32mm, turning speed of the dressing wheel 200 - 2000 rpm. (stepless adjustable) ,, Oscillating speed of the dressing wheel 3400 mm / min (stepless adjustable), oscillating stroke of the dressing wheel 0-50 / min (stepless adjustable), connected load of the motor of the dressing wheel 0.75 kW (400 V / 50 Hz), Weight approx 1520 kg, dimensions 1340 x 1300 x 1900 mm, colour grey / red.

Condition: good (used), Motor protection switch, star-delta switch, reversing switch -Type: MDPPehb -Setting range in amperes: 4.9/5.5 Ncsdpfx Aob A Sc Ejdtsr -Number: 16x switches available -Price: per piece -Weight: 2 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Ncedpfxeyvfhde Adtjr Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: good (used), electric motor, three-phase motor -Manufacturer: ATB Nordenham, explosion-proof electric motor -Type: CD 90L2-8 -Power: 0.55 kW -Speed: 690 rpm -Shaft: Ø 14 x 30 mm -Design: B14 -Protection class: IP55 -Terminal box: EAR 80 Ncedpfxoy Ed Dke Adtor -Number: 2x motors available -Price: per piece -Dimensions: 345/176/H270 mm -Weight: 32.1 kg/pc.