Used Christ Christ Automatic Car Wash for sale (29,819)

Condition: used, Year of construction: 2013, functionality: fully functional, total length: 20,000 mm, We are selling used linear carwash from well known manufacturer CHRIST, year of production 2013. Carwash is complete, without chains and dry wiping. Approximate length of carwash is 20 metrov. Including: • Advertising and foam spraying portal • Double-sided brushes for washing side skirts and rims • High pressure washing portal • Portal for washing with textile brushes • Driers • Waxing platform Nwjdpsxy E Azofx Afwok • Detergent dispenser • Floor gratings Suitable for companies that want to increase vehicle washing capacity or install a new washing line with reliable equipment.

Condition: refurbished (used), Year of construction: 1992, operating hours: 3,998 h, functionality: fully functional, machine/vehicle number: 100175, We are selling a used Franke drum washing system for washing bulk goods, primarily for turned and milled parts. Facilities of the facility: Tanks made entirely of stainless steel 600 liter washing tank with 18 KW heating 600 liter flushing tank with 18 KW heating Insulation of both tanks Weekly timer for the heating Washing drum can be switched via rotary button, 360° rotation or standstill when washing and rinsing including speed sensor Exhaust fan with 900 m3/hr. Oil separator over large disc skimmer with pan and ball valve automatic water dosing / Geka coupling at the rear Nwsdpfxsqwnypo Afwek 2 washing baskets 530 x 300 x 200 mm with tension lid, mesh size 6x6 mm 50 kg load per washing basket Pneumatic door opening and switching from washing to rinsing To be attached to the front frame as a basket support with 4 M12 screws Drain taps for washing and rinsing tanks as well as two large maintenance hatches Good accessibility on all sides, 2 x folding doors at the front and the remaining side walls can be removed using quick-release fasteners Rexroth pneumatics Grundfos stator pump in the washing and rinsing tank 63 A Mennekes plug with 5 meter cable Rital control cabinet with accessories inside operation manual Machine ready for immediate use Delivery and commissioning possible after consultation and cost assumption If you have any further questions, please write or call

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Nwjdpfjxd Ubnsx Afwok Note 🗒️ No printer.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. Nwsdpjulpmzsfx Afwjk In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Year of construction: 2012, condition: good (used), 2012 Sormac Automatic Carrot Topper WOA-4S: This is a 4 lane carrot topper complete with 360 platform, waste conveyor and product conveyor. Located in Northern Ireland Nwsdpfxjzg Inge Afwjk *Site can dismantle and load to buyers transport*

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation Nedpfx Afjru Evgswowk - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: used, Washing system from Steimel (Robot-Polar) Nedou Rbfnepfx Afwowk The washing system works fully automatically. Incl. crane system.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, controller manufacturer: Mitsubishi, Equipment: documentation/manual, - 4 ultrasonic tanks with floor sound and heating - 2 rinsing tanks with heating - Surface separator Nwsdpfx Afjvu Acfswsk - Tank/circulation filtration per tank - Additional tank with external heating - DI water connection with carbon cartridge - 1 vacuum dryer (with reserve pump) - Transport system for automatic transfer of the product carriers - 12 product carriers for holding individual transport baskets - Mitsubishi PLC control

Year of construction: 2026, condition: new, functionality: fully functional, total width: 3,310 mm, total height: 2,830 mm, lifting height: 1,800 mm, mast type: triplex, drive type: elektrohydrauliczny, permissible axle load: 4,500 kg, arm reach: 1,400 mm, arm spacing: 2,820 mm, platform width: 2,820 mm, section length (min.): 110 mm, machine/vehicle number: TW240E, control type: manual, Equipment: 3rd hydraulic function, CE marking, documentation/manual, double-sided, type plate available, The Digima TW240E car lift is a professional, automatic two-post lifting system designed for everyday use in automotive workshops, mechanical service centres and vehicle maintenance facilities. With a lifting capacity of 4,500 kg, it is suitable for safely lifting passenger cars, SUVs and selected light commercial vehicles. The maximum lifting height of 1,800 mm provides convenient access to the underbody and allows mechanics to perform repairs, inspections and maintenance work comfortably. The TW240E features a robust base-frame construction with a floor-mounted connection between the columns. This solution makes the lift suitable for workshops with limited ceiling height. The overall height of the unit is 2,830 mm, the total width is 3,310 mm, and the clear distance between the columns is 2,820 mm. A minimum lifting height of 110 mm also makes it easier to service vehicles with low ground clearance. The lift is equipped with an electrohydraulic drive system powered by a 2.2 kW motor and a 380–400 V power supply. The automatic electromagnetic Solenoid Lock safety system allows the locking mechanisms to be released conveniently from the control panel. A 24 V low-voltage control system, emergency stop button and aircraft-grade cable synchronisation ensure stable, even and safe lifting of the vehicle. Universal two-stage and three-stage lifting arms make it possible to adjust the support points to vehicles with different wheelbases and body lengths. Adjustable rubber lifting pads with a height of 80 mm protect the vehicle sills and make correct positioning easier. Self-lubricating UHMW sliders and reinforced C-shaped arm holders increase the durability of the structure, ensure smooth operation and allow the lift to withstand intensive daily use. The Digima TW240E is a solid, functional and easy-to-operate lift for workshops that require a universal solution for servicing different types of vehicles. Its high lifting capacity, automatic safety systems, strong construction and CE certification make it a safe and durable addition to a professional workshop. Nwedjzlgc Hopfx Afwjk

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07/018, overall weight: 2,900 kg, inner diameter: 2,500 mm, temperature: 65 °C, heating capacity: 4 kW (5.44 HP), load capacity: 1,500 kg, Equipment: documentation/manual, Cleaning System Type W 250 Used, low operating hours Available immediately. Useful dimensions: • Basket diameter: 2,500 mm • Usable internal height: 1,200 mm • Basket load capacity: 1,500 kg With the following features: • Washing • Rinsing • Hot air drying 2 x 10 kW • Plate phase separator for oil removal • Automatic filling device Nwedpfxoxgcx Tj Afwok • Chip filter with lye cover plate • Indirect bath heating stainless steel/ceramic • Vapor extraction • Rinse water extraction • Automatic pumping system with floor flushing • PLC with operator panel • Pull-out washing basket with transport trolley Current new price: approx. €160,000.00 Offer price: €70,000.00 Unpacked, ex works Bad Salzuflen. Payment: Due immediately, net.

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: Njdezgclmopfx Afwowk RWR 80 L KST Fully automatic PLC parts cleaning system The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without dismantling. The unit is space-saving, quiet and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz, 16A CEE 5p 6h plug Drain: 1 1/4" outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Whole components (without dismantling) Quality seals: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heater: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 kg Application area: The RWR 80 L KST fully automatic PLC has been developed for the field of plastic injection molding and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system begins to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically, after the instructions displayed on the screen have been confirmed. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2011, operating hours: 21,763 h, functionality: fully functional, total length: 7,200 mm, total width: 2,950 mm, total height: 3,000 mm, overall weight: 12,400 kg, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 175 A, power: 105 kW (142.76 HP), A Pero V4 parts cleaning system is available. Basket dimensions X/Y/Z: 1250mm/850mm/500mm Nwodsu Ecflspfx Afwek Control system: Siemens S7 Basket feeding: automatic, Operating hours: 21763h, batch counter: 54211. Ultrasound included. Documentation available. On-site inspection is possible. Available from November 2024. Spare parts package included

Condition: new, Main drive of a Lavatec car wash system. Nwsdpfx Aozbtafsfwok

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: contino spezial 260, total length: 10,200 mm, total width: 2,532 mm, total height: 2,487 mm, water consumption per time unit: 4 l/min, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 6 bar, temperature: 80 °C, heating capacity: 50 kW (67.98 HP), power: 75 kW (101.97 HP), waste water connection: 50 mm, water pressure: 2 bar, water connection: 25 mm, Equipment: documentation/manual, Machine description - the lids of the crates can be folded down to the side, total transport height approx. 1000 - 1050mm - the two track belts each have 2 guides on the side, one guide each from above and a cam spacing of 700mm Nsdpfx Aorr Smlsfwewk - Feed zone with 1500mm straight length with drive, working height approx. 1000mm - Main washing zone with 2700mm length, tank 600l with heating 50kW, (20kW possible via hot water) washing temperature 55-60°C, 1 stainless steel centrifugal pump 7.5kW 1500l/min at 2bar, stable external box filter, brush cleaning takes place after the first spray cleaning with an external brush, then repeated spray cleaning, - 1800mm rinsing zone with approx. 150 - 250l/h via direct fresh water supply, the fresh water is supplied hot at at least 60°C; 500mm feed zone with top suction connection (stainless steel radial fan, DN 250 connection); 1800mm long blow-off with 2 5kW fan motors; 500mm long discharge table Washing, rinsing and drying system length 8800mm Hourly output (adjustable with LENZE frequency inverter) approx. 250-300 crates with hinged lids (cross flow) or 500 lids in longitudinal flow incl. label removal with lateral brushes (LENZE drive 0.37kW) Brush cleaning takes place after the first spray cleaning with an external brush, followed by a second spray cleaning, Additional hot water heat exchanger in the machine, Drum filter for automatic label discharge, with this equipment the dirty water in the main flow is fed through a drum filter, the label dissolution and mash formation is significantly reduced, the washing tank capacity can be used for several shifts without changing Gravity roller conveyor for Euro pallets, internal width 840mm, very stable design made of 4mm thick stainless steel sheet, the rollers are made of galvanized steel 5000mm The machine has the following connections: - Fresh water at approx. 60-80°C 3/4", flow pressure min. 2 max. 6bar via hose connection 3/4" - Electricity: max. approx. 50kW, 400V 50 Hz - Waste water DN 50 discharge into floor drain - Hot water 1 1/4" flow and return, flow temperature min. 80°C, flow rate approx. 3-4m3/h Key advantages of our machines: - completely double-walled, sound and heat-insulated machine housing, manufactured in one piece and completely welded, low energy consumption - reliable operation, very long service life - long washing treatment and nozzle and washing system refined over the years = excellent washing results - Nozzle arms can be removed and cleaned without tools, stainless steel nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling - Washing tunnel designed for crate size 300x400x600mm - Use of first-class attachments, e.g. LENZE drive and frequency converter, EDUR stainless steel centrifugal pump, stainless steel ELEKTROR Esslingen blow-off motor with motor separation and SIEMENS switch cabinet components

Condition: used, Sporer PCS Aqua Jumbo Iso parts washer or automatic parts cleaning machine for the automatic cleaning and degreasing of workpieces using a heated, aqueous cleaning medium via a spray process. The machine operates as a top-loading unit with a rotating wash basket and is suitable for large and heavy components in workshops, maintenance departments and industry. The Iso version features thermal insulation to reduce energy loss. The pumps are leaking and need to be overhauled or replaced. Technical data: - Basket diameter: 1,100 mm - Usable height: 500 mm - Load capacity: max. 350 kg - Tank capacity: 250 l Nwedpfxezry Dwe Afwjk - Power: 15.4 kW - Operating temperature: max. 75 °C

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 9850, total length: 7,500 mm, overall weight: 900 kg, input voltage: 400 V, Equipment: documentation/manual, Sale of an LCT T 600 demonstration pass-through washing system from 2024 at a special price Zones of the pass-through washing system: Nedpfx Ajwpq Evefwewk Zone 1: Main washing zone: Length: approx. 2600 mm Pump: 7.5 kW, 60 cbm/h Tank capacity: approx. 400 l Water heated with 3 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 2: Rinse zone Length: approx. 2200 mm Pump: 3 kW, 33 cbm/h at 3 bar Tank capacity: approx. 350 l Water heated with 2 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 3: Hot air drying zone: This serves for all-around mechanical air blowing (from below, the sides, and above) of the water droplets located on the surface of the washed goods, which are blown off by air knives and built-in high-pressure fans. The conveyor belt is equipped with a plastic belt. The frame is made of stainless steel 1.4301, has its own drive, and is controlled via the system’s PLC control. The conveyor belt brings the washed goods out of the machine, makes a 90° curve to the left, and then conveys the goods towards the machine entrance (where the items to be washed are placed on the machine). There are 3 photoelectric sensors at different points on the conveyor belt, equipped with special holders and mutually facing reflectors on the stainless steel structure. Belt width 400 mm / height up to 400 mm (At the beginning – 1 sensor before the curve, 1 sensor at the end, and 1 sensor approx. 2 m before the end) is a buffer zone (1-2 m long). As soon as the buffer zone is filled with returning washed goods, the machine and the conveyor belt stop automatically.

Condition: used, Chip dust suction filter, with automatic filter cleaning (wash control with blowers and Macair panel) at 1 bag. Motor-powered lathe, optional Euro 500 + VAT Suction motor power:: Kw. 4 Nwjdpfjtxdpxjx Afwsk Filtration size: Main tube mouth mm. 250, deviations mm. 150 each

Condition: used, Automatic cutting, brushing & washing, drying, made RSA Entry length: 12.000mm Exit length: 30 - 1.000 mm In packed condition – ready to be delivered. Nsdpfx Aoymarlefwewk Entry length: 12.000mm Exit length: 30 - 1.000 mm Diameter: 12 - 80 mm

Condition: used, Year of construction: 2004, functionality: fully functional, DÜRR Aqueous Cleaning System with large baskets – available in single or double basket configurations. System is available ex location; a large quantity of spare parts is included in the delivery. Price on request Our Plant and Machinery Service: High availability – maximum productivity! Downtime costs time and money – that's why we ensure your machines and systems run reliably and efficiently. Our experienced team of qualified service technicians supports you with expertise, commitment, and complete service from a single source. Our Service Promise: We keep your systems in optimal condition – from mechanics and electronics to refrigeration technology. Whether maintenance, repair, or optimization: We ensure smooth operations. Overview of our services: Nwedpfx Aox Emy Ujfwjk 🔧 Electrical / Electronic Service • Professional troubleshooting and repairs • Modifications, upgrades, and modernization of controls (all common manufacturers) • Optimization of existing systems • Spare parts service for fast recommissioning ⚙️ Mechanical Service • Fast crash repairs and expert restoration • Regular maintenance and servicing of your equipment • Modifications, adjustments, and expansions • Installation and commissioning of new machines • Refrigeration plant inspections according to §6 Section 1 of the Chemicals Climate Protection Ordinance We carry out almost all mechanical and electronic work precisely, reliably, and on schedule. _____ Why we are the right partner for you: ✅ Everything from one source – mechanics, electrics, refrigeration ✅ Experienced technicians with extensive expertise ✅ Fast response times and flexible solutions ✅ High system availability through preventive maintenance

Condition: new, Year of construction: 2025, Parts cleaning machine, spray cleaning system, type L122 Automatically operating hot water chamber cleaning machine with basket drive via geared motor, machine housing made of stainless steel 1.4301, - 2 sets of three-sided arranged nozzle systems made of stainless steel with stainless steel flat jet nozzles, - 2 stainless steel washing pumps (manufacturer: Xylem/Lowara), Nedef Dy Rwopfx Afwjwk - Level control as dry-run protection - 2 suction filters as pump protection - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Usable height: 700 mm - Max. load weight: 300 kg - Spray pressure: 2 x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (RT - 60°C) - Connection power (electrical): approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 (h) mm

Condition: ready for operation (used), functionality: fully functional, The Tecma Pack FM1200p box erector automates the process of forming flat-folded cardboard blanks into tray-style boxes. It forms and then glues the flaps to create regular tray boxes, ready to receive products. A tray box is essentially a cardboard tray with raised side walls. This design facilitates the loading of products while providing good support during handling, storage, and transportation. This format is particularly suitable for packaged food products, trays, pouches, and items intended for quick shelf placement. Tray boxes are among the common formats produced by industrial box erectors and tray formers. Forming and hot melt gluing First, the operator loads the cardboard blanks into the machine's magazine. Then, the FM1200P takes each blank and performs the various folds. Next, it forms the side walls and applies hot melt adhesive to the designated areas. Finally, the machine discharges a formed and glued box to the next station. As a result, it provides packaging that is ready for manual or automatic filling. This process improves the consistency of the boxes and significantly reduces manual operations at the end of the line. Integration into a packaging line The Tecma Pack FM1200P can operate upstream of a loading station, a case packer, or a conveyor. Thus, the formed tray boxes can receive products directly before closing, labeling, or palletizing. Furthermore, its programmable logic controller (PLC) facilitates cycle monitoring. The hot melt gluing system also ensures consistent box assembly. With a stated output of 1,200 boxes per hour, the machine meets the needs of industrial production lines that require a continuous flow. A clearly identifiable box format Therefore, the FM1200P does not produce a generic cardboard box. It produces a tray box, formed from a flat-folded cardboard blank. A photo of the resulting box should appear in the gallery so that the buyer can immediately understand the format that can be produced. However, the exact format of the box depends on the installed tooling and the dimensions of the blanks used. Therefore, it is advisable to present a photo of a box actually produced by this machine or by its current tooling. Technical specifications: Nwedpfey Nxnlox Afwek Manufacturer and model: Tecma Pack FM1200P Machine type: automatic tray box erector Product: formed and glued tray box, ready for filling Output: up to 1,200 boxes per hour Gluing system: hot melt Machine power: 2 kW Gluing unit power: 4 kW Pneumatic supply: 6 bar – consumption of 7 m³/h Control: programmable logic controller (PLC) Weight: 1,000 kg Dimensions (L × W × H): 3950 × 1860 × 2250 mm

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0737181227, inner dimension length: 1,000 mm, inner dimension width: 1,200 mm, inner dimension height: 800 mm, type of input current: three-phase, Fully automatic design for Euro boxes with 3 m infeed table and 1 m discharge table in roller version. Internal and external cleaning. Suitable for hot/cold and lye water. Nodow Th R Nspfx Afwjwk

Condition: good (used), Leutenegger (Starrag) wash box Technical specifications Bath contents: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V / 230V 50 Hz Supply line: 40A Control voltage: 24 V DC Temperature max: 50 ° C Heating electric Heating power: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3 / h Shipping costs on request Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request Nwedpfx Aod Nlybefwjk

Condition: good (used), Year of construction: 2017, Automatic cardboard strapping machine, Mosca, SoniXs-TR6 Pro – used: Price ex works: only €9,500.00 (net) ex works! Manufacturer: Mosca Type: SoniXs-TR6 Pro Year of manufacture: 2017 Machine number: 112921 1L+N+PE, 50-60Hz, 100-240V, Nwsdpfozpf H Ejx Afwok 3.00 - 1.25 A, max. 16 A Condition: good Available: from approximately the end of October 2026 Location: Erfurt area

Condition: new, Year of construction: 2026, Spray cleaning system type SM11 solid designed parts cleaning system with basket drive by gear motor, made of stainless steel 1.4301, - 3-sided arranged nozzle system made of stainless steel incl. stainless steel flat and spot blasting nozzles - autom. steam exhaust fan - coarse filter (removable basket) in the return line - oil skimmer for bath maintenance - timer for washing time setting - electronic lid monitoring - stainless steel wash pump (fab. Ebara) - level sensors / dry run protection - drain nozzle with ball valve - basket diameter: 1.100 mm - useful height: 700 mm Nwodpfx Afepm Ha Dswjk - max. loading weight: 250 kg - spraying pressure: 3 bar - tank capacity: 260 liters - heating: electrically adjustable (RT - 75°C) - Connected load (electrical): approx. 12,5 kW - plant dimensions (WxDxH): 1.500 x 1.600 x 2.500(h) mm (with open lid)