Used Cleaning System Hd Wash Table 100 Bar for sale (73,750)

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. Bsdpfx Ajf A Nq Asl Aewu The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard configuration: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Year of construction: 2026, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!!!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure can be adjusted from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optional up to 150 kg Bodpsf A D Nmofx Al Aowu Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blower gun inside • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Top-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with support from gas springs • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction Bwjdpfx Aoyc H I Ssl Asu —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bodpfjynnliox Al Ajwu Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: used, Year of construction: 2021, Used MOC cleaning system, type Cleaning System 100. Continuous degreasing system for use with aqueous cleaning agents or emulsions. The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 12/2021 Manufacturer: MOC External dimensions: Length, max.: 1,500 mm Width: 1,500 mm Overall height: 1,700 mm Infeed height: 900 mm Usable size: Width: 650 mm Height: 300 mm Belt design: wire mesh in stainless steel Energy data: per station Power: 2 kW Pressure, max.: 3 bar Caustic solution flow rate: 7.5 m³/h Transport drive: 0.5 kW Max. load: 20 kg/m Speed: 1.4 m/min, adjustable with oscillation Tank volume: approx. 500 l Heating: 18 kW Connected load: approx. 25 kW Material: Stainless steel 1.4301, all parts in contact with the medium or corrosion-resistant Special features: Cabin structure: in a robust steel construction and with all necessary inlet and outlet connections including a 100 µm filter in the return line and sludge collection rings with drain and overflow 1 heating unit with thermostat, electric Bsdpfxozicl Es Al Aewu 1 complete pumping unit, piped Pump with base plate and motor 1 set of nozzles 1 set of PVC aprons, easily removable 1 drain per tank with manual ball valve 1 blow-off station with on-site compressed air, flat jet nozzles and air ducting Electrical control cabinet The control cabinet contains all contactors and fuses with VPS control

Year of construction: 2026, condition: new, functionality: fully functional, Genox 1,000kg/hr Rigid Plastic Washing Line designed for rigid plastics with a wall thickness ranging from 1~25 mm such as HDPE/PP bottles, containers etc. The system includes pre-shredder, friction washers, float sink separation tank, granulator and drying system for producing clean dry plastic granules along with a central, intelligent HMI control system. This is a standard system we offer but can be tailored to suit specific customer requirements. Individual items from our systems are available for separate purchase and integration into existing customer systems. Bwsdsz Ai Tvjpfx Al Aou Please contact us to discuss your project or to set up a site visit.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. Bsdpfozzpb Rsx Al Ajwu - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Bwsdpfjzt N R Nox Al Aeu

Year of construction: 2007, operating hours: 8,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 80 mm, product length (max.): 80 mm, product width (max.): 80 mm, machine/vehicle number: 26240, This KSN Drum Washer 250 WRD is a used industrial cleaning system designed for reliable and efficient parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and can be integrated into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit the production requirements. Bwodpfx Alozy Hd Hj Aou KSN drum washers are designed for many years of operation in industrial environments. Standard equipment: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Technical details can be found in the attached PDF document.

Year of construction: 2000, condition: excellent (used), 1 x Parts Cleaning System Malmkvist Turbex 2000 Year of manufacture: approx. 2000 with heating Bwedpfx Aey I Nr Eol Aju 3 selectable programs: - Washing + drying - Washing - Drying Wash and dry times are adjustable. In very good condition. Technical data: Max. load weight: 20 kg Drum diameter: 400 mm Drum length: 500 mm Heating capacity: 6 kW for dry air blower as well as washing medium Temperature adjustable 0 - 80 degrees Accessories: 3 x washing baskets with three different hole diameters (1.5/2.5/5 mm) + Rack (homemade) 1 x roller conveyor with loading/unloading chute Operating manual + wiring diagrams The machine can be inspected under power.

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device Bodpfjudz D Uex Al Aswu - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Year of construction: 2022, operating hours: 50 h, condition: new, functionality: fully functional, heating capacity: 12 kW (16.32 HP), product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 43865, The KSN Drum Washer 350 WRD is an industrial cleaning system designed for efficient and reliable parts cleaning in automated production environments. The system combines washing, draining, rinsing and drying in one automated process, ensuring consistent cleaning results while reducing manual handling. The rotating drum provides continuous movement of the components throughout the cleaning process, making the cleaning system particularly suitable for industrial applications requiring efficient and repeatable processing of parts. Designed for continuous operation, the Drum Washer 350 WRD can be integrated into existing production lines and contributes to increased productivity and reduced operating costs. Bodpfx Aszy E Drol Aswu Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Technical specifications can be found in the attached PDF document.

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment. Bedpfxsxcnxdj Al Aewu

Year of construction: 2005, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 7614-23, This KSN Drum Washer 350 WRD is a used industrial cleaning system designed for efficient and reliable parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and is suitable for integration into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit specific production requirements. KSN drum washers are designed for many years of operation in demanding industrial environments. Equipment and features: Bjdpfxjzy Hkte Al Ajwu Grundfos pump Fully insulated construction Automatic level and pressure monitoring Adjustable drum speed Technical details can be found in the attached PDF document.

Condition: new, functionality: fully functional, Year of construction: 2016, operating hours: 40 h, heating capacity: 12 kW (16.32 HP), product height (max.): 60 mm, product length (max.): 60 mm, product width (max.): 60 mm, machine/vehicle number: 40017, The KSN Drum Washer 350 UST Ultrasonic is an industrial cleaning system designed for efficient and thorough parts cleaning. Combining drum washing with ultrasonic cleaning technology, the system is particularly suitable for components with complex geometries, holes and cavities, as well as applications with high cleanliness requirements. Ultrasonic cleaning uses high-frequency sound waves in liquid to effectively remove contaminants while providing a gentle cleaning process without mechanical wear. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Bwjdpozy Euwsfx Al Aou You can find technical details in the PDF attached document.

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, operating pressure: 210 bar, empty load weight: 175 kg, warranty duration: 6 months, temperature: 98 °C, KARCHER HDS 1000 BE PETROL HOT WATER WASHER Manufactured in 2021 The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. NEW 12V 50Ah starter battery. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient HONDA GX390 petrol engine ensures stable operation even during prolonged use. With operating parameters of 210 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Pumping capacity (l/h): 450 - 900 Operating pressure (bar/MPa): 40 - 210 / 4 - 20 Max. water supply temperature (°C): 80 - 98 Fuel consumption (kg/h): 5.6 Engine type: GX 390 Engine manufacturer: HONDA Weight (kg): 175.7 Dimensions (L x W x H) (mm): 1100 x 750 x 785 EQUIPMENT: NEW 12V 50Ah STARTER BATTERY NEW durable German R+M pressure gun NEW stainless steel pressure lance NEW 10m reinforced steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE HIGHEST FEATURES FEATURES: Open oil system - no operating time limits Highly readable and intuitive control panel Bwsdsya Aziepfx Al Asu Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Special equipment: automatic oil skimmer Technical data Heatable for aqueous cleaning agents. For the removal of oil and grease contamination in the shortest possible time. Universally applicable for the fully automatic cleaning of small parts from production, manufacturing, and maintenance, such as bolts, sleeves, and ball bearings. 2129905 Easy operation thanks to the fully automatic cleaning process. This allows skilled workers to concentrate on other important tasks. The washing tank is filled with a mixture of water and a water-soluble IBS special cleaner (washing solution). The contaminated parts to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the device is switched on, and the solution in the tank is heated. In the closed device, the basket rotates around its own axis at a constant speed. The pump unit draws the washing solution from the washing tank and pumps it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The parts to be cleaned are intensively blasted with the hot solution from all sides during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the device switches off automatically. ∙∙ 1 pump arranged vertically ∙∙ 3 three-dimensional nozzle tubes made of stainless steel ∙∙ robust stainless steel design ∙∙ additional small parts cleaning basket made of stainless steel (Ø 170 mm) ∙∙ rotating washing basket made of stainless steel, gear rim drive via separate motor ∙∙ intake filter in front of the pump shaft ∙∙ high spray pressure ∙∙ fume extraction ∙∙ stainless steel sieve plate with filter basket ∙∙ low water level protection W x D x H (closed): 1130 x 1010 x 1150 mm W x D x H (open): 1130 x 1220 x 1730 mm Usable height: 500 mm Load capacity: 150 kg Bwodpozwb Eaofx Al Asu Basket diameter: 780 mm Washing tank capacity: 85 liters Pump pressure: 3.1 bar Spray rate: 4800 L/h Power consumption: 4.8 kW / 400 V / 50 Hz Weight: 90 kg Temperature: 0-60°C

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L90 Automatically operating hot water parts washing machine with basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 790 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (room temperature - 90°C) Machine dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash time timer, freely adjustable (minutes and hours) Complete cleaning machine (internal components and external cladding) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Bsdpfxod Ryxco Al Aewu Insulation of the entire system (tank and cabinet) made of stainless steel 1.4301 Mechanical lid locking system Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction system including condensate return Parts washing machine is in new condition (test/pilot plant) OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, We are offering for sale our component cleaning system from Ziegener + Frick. The system is in like-new condition. Various loading frames are included. ION Clean cleaning table. Summary with AI: Bodpfjz Enr Tex Al Aowu The IONClean cleaning table from Ziegener + Frick is a soundproof, turnkey stand-alone system for contactless and electrostatic surface cleaning of components. You can find an example video from the manufacturer under Videos. We will gladly answer any questions you may have about the system. An inspection is possible by appointment. New price of the system: approximately €85,000.

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Bwodpfszvp Uyox Al Asu

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 1,800 mm, total length: 3,500 mm, total height: 2,500 mm, High-quality degreasing and cleaning system based on PER This system is a high-quality and high-performance degreasing and cleaning system based on perchloroethylene (PER) with a standard basket size. Thanks to two pre-treatment tanks, integrated ultrasonic cleaning, and vacuum drying, the system enables safe, thorough, and fast degreasing of a wide variety of metal workpieces. The complete stainless steel piping and high-quality system components ensure high operational reliability and a long service life. The system has been professionally overhauled and is ready for immediate use. An inspection of the system while it is running is possible at any time in 75447 Sternenfels after prior arrangement. Bedpfxszmxlpe Al Aswu We are always available to provide further information or answer any questions you may have. We look forward to your inquiry! System equipment: - Workpiece handling - Spray system - 2 x hot flushing systems - Ultrasonic cleaning with 1.0 kW / 25 kHz - Process filter 100 μm - Fine filter 5 μm - Vacuum drying - Vacuum distillation - Adsorption unit Technical data: Solvents that can be used: Perchloroethylene PER Filling volumes: 600 dm³ Operating mode: 2-shift Connected load: 40 kW Compressed air: 6 bar System weight: 3000 kg Throughput: Up to 5 batches/h (150 kg/h) Basket dimensions: 480 x 320 x 300 mm

Year of construction: 2026, operating hours: 20 h, condition: new, functionality: fully functional, operating temperature: 60 °C, air pressure: 2.5 bar, conveyor belt width: 400 mm, heating capacity: 18 kW (24.47 HP), product height (max.): 200 mm, product length (max.): 800 mm, product width (max.): 400 mm, machine/vehicle number: 45664, Beltline / Conveyour Cleaning System 400 WRD is developed as a compact and efficient solution for parts washing directly in the production line. The Beltline Series is specifically designed for industrial parts washing and degreasing of components with a certain level of complexity or weight, or in applications where gentle handling is required. The energy-efficient design reduces both operating costs and manual handling, making the solution ideal for both small batch production and continuous operation. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Bwsdpszy Eqxofx Al Aou You can find technical details in the PDF attached document.

Condition: good (used), Year of construction: 2006, power: 3 kW (4.08 HP), Zentner Soltec Screen Washing Unit ST 100 Manufacturer: Zentner Systems GmbH Model: Soltec ST 100 Year of manufacture: 2006 Serial number: 0505 / 06 Operating voltage: 3 × 400 V Mains frequency: 50 Hz Operating power: 3 kW Operating pressure (air): 6.0 bar Design: Enclosed stainless steel screen washing cabin Application: Automatic cleaning of screen printing frames Special features: Bodoyrndgjpfx Al Aowu – EX safety signs present – Integrated exhaust/ventilation system – Compact design with separate control cabinet Location: Schierling Viewing possible by appointment.

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 Bjdpfxezwccme Al Ajwu For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water Transfer to the filter system is carried out on-site, air and foam-free. Temperature max.: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via on-site lifting stations. The chips and fine sludge produced during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharge of grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Volume max.: approx. 4.58 m3 Length: approx. 4,000 mm, incl. 70 mm stiffening Width: approx. 1,890 mm, incl. 140 mm stiffening Height: approx. 1,105 mm, incl. 100 mm bottom profile Neck height: approx. 2,300 mm Theoretical discharge volume max.: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto angle frame), without ladder, without railing, without internal access rungs Volume max.: approx. 0.55 m3 51026ä

Year of construction: 2009, condition: excellent (used), Cleaning system is fully functional. Working dimensions: diameter 800mm, working height 600mm Tank volume: 90L Options: Automatic cleaning or with washing brush Interior lighting Design / Accessories: Direct drive for the washing basket Mist extraction Low water level protection / level control Lid locking Weekly timer Chip/particle filter with bath cover plate 5 ECO rinse (fresh water) for minimal water consumption Bwjdszkkb Djpfx Al Aeu with machine-side hot water preparation Three-dimensional cold air blow-off Oil skimmer Drainage device / bottom flush with pump in gray cast iron and galvanized pipe system Hose connection and tap valve in aluminum/plastic