Used Cmc Cwa11-800 for sale (8,445)

Condition: used, Year of construction: 2010, Used Revised Air Compressor CMC CWA11-800 40 bar General Features of the Used Air Compressor CMC CWA11-800 40 bar The Used Air Compressor CMC CWA11-800 40 bar delivers high performance as an oil-free, three-stage unit, ideal for industrial environments that require high-quality compressed air. CMC manufactured this model in 2010 for air compression systems operating at up to 40 bar of working pressure. Since the unit uses dry-running cylinders, it eliminates the need for internal lubrication. Therefore, operators can use it in critical applications where they must avoid any air contamination. Moreover, its robust design ensures long-term durability and operational consistency. Technical Operating Specifications Nljdpfx Aswcf Ewjbuoh The Used Air Compressor CMC CWA11-800 40 bar operates with three cylinders across two compression stages. It draws air at atmospheric pressure and functions in ambient temperatures ranging from +1 to +35 °C. Consequently, the unit suits various environmental conditions. The system delivers an intake flow rate of 800 cubic meters per hour and reaches a maximum pressure of 42 bar. In addition, a 132 kW (180 HP) three-phase electric motor powers the compressor at 710 revolutions per minute, running on 400 Volts and 50 Hz. As a result, the compressor provides high efficiency and reliability, even under demanding workloads. Cooling System and Thermal Management To maintain optimal temperatures, the Used Air Compressor CMC uses a water-based cooling system for both the cylinders and compressed air. Specifically, copper tube and brass plate heat exchangers dissipate heat in both the intermediate and final compression phases. Furthermore, a gear-driven oil pump circulates lubricant through a dedicated heat exchanger, which enhances cooling performance. Additionally, a preheating resistor stabilizes thermal conditions during start-up. Therefore, the system reduces thermal stress and extends component life. Overall, this combination of cooling solutions ensures optimal efficiency throughout the filtration cycle. Mechanical Equipment and Functional Components CMC designed the Used Air Compressor CMC  with a base frame supported by four anti-vibration feet. As a result, operators can install the unit directly on the floor without additional foundation work. The W-type compressor block features dry cylinders and pistons with PTFE-loaded sealing rings. In contrast to lubricated systems, this configuration prevents oil contamination. Furthermore, stainless steel suction and delivery valves include automatic unloader mechanisms that support load/unload functionality. In terms of transmission, the motor and compressor connect via trapezoidal belts, which simplify maintenance. The intake side also includes a silenced filter, while a protective cage improves operator safety. Safety Devices, Monitoring, and Physical Layout The Used Air Compressor CMC integrates comprehensive safety and monitoring systems.

Condition: good (used), Year of construction: 2002, functionality: fully functional, filter area: 48 m², filter pressure: 15 bar, pressure: 380 bar, cake thickness: 25 mm, total width: 1,500 mm, total length: 4,800 mm, total height: 1,980 mm, overall weight: 4,600 kg, number of chambers: 44, Equipment: documentation/manual, safety light barrier, For sale is a chamber filter press with the following accessories: Hydraulics, filter plates, safety devices, control system, swing plates, feed pump, press frame (steel platform), 3 cake containers for forklifts. Chamber filter press 800 Side-frame press 15 bar filtration pressure Approx. 540 liters Open filtrate discharge 800x800 PP 25mm chamber depth 44 chambers Nlodpfxszulf Ss Abueh Approx. 2.5 meters useful length Length 4800 x Width 1500 x Height 1980 mm 4600 kg Price upon request. We would be happy to provide you with an individual offer.

Condition: good (used), Code: 0443 Brand: CMC - ITALY Model: SC 800 - CE Standard Band saw with covered wheel for cutting wood, carpentry, furniture, fixtures, plastics, aluminum, and other materials - CE Standard Technical specifications: Flywheel diameter 800 mm Working table size 710 x 1110 mm Nodjzlqrfspfx Abuolh Cutting height 450 mm Blade length 5620 mm Motor 5,5 Hp Overall dimensions mm 1450 x 850 x 2400 h Weight kg 580

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Drive power: 15 kW EQUIPMENT Control system Suitable for secondary shredding Nlodpfx Abez Ngbveuoh The seller has a suitable conveyor belt in stock as an optional extra.

Year of construction: 2016, operating hours: 3,600 h, condition: excellent (used), functionality: fully functional, Used Terex Evoquip Colt 800 Tracked Screening Plant Year 2016 3600 Hrs 9 x 4 Two Deck Screenbox Woven Wire Top Deck & Bottom Deck CAT Power Nedpfoz Nkumsx Abuelh No Adblue 17,000 kgs Weight Excellent Condition Ready To Go To Work

Condition: excellent (used), Professional granite measuring plate by VOGEL Germany, designed for precise measuring, inspection, and workshop applications. Technical data: Manufacturer: VOGEL Germany Article number: 260266 Plate dimensions: 800 × 500 × 100 mm Accuracy class: 1 Identification number: 2014081163 Material: granite Marking: “nicht kalibrierpflichtig” (not subject to calibration) Includes a sturdy metal stand/base Nledpjz Spcmjfx Abuoh The plate is used. Normal signs of wear, soiling, and minor surface scratches are visible. The visual condition is accurately depicted in the photos. The robust, heavy-duty construction ensures a stable reference surface during the inspection and measurement of components. The sale includes the VOGEL granite plate and the stand shown in the photos.

Condition: used, Niles Centre Lathe, Type DLZ800 LIV5000, Approx 5.2m Between Centres x 860mm Swing Over Bed, 250mm Swing Over Saddle, Fitted with 750mm 4 Jaw Chuck, 2 Fixed Steadies Steadies, Total Weight 7 Tons, Serial No Specifications: Swing: 1,000 mm Njdpfxozvrrhs Abuelh Centers: 8,000 mm

Condition: good (used), mast type: telescopic, fuel type: diesel, color: other, General information Year of construction: 2014 Mileage: 92.626 km Registration number: VJ-350-F Technical information Transmission: Manual gearbox Drive: Wheel GVW: 3.410 kg Functional Lifting capacity: 200 kg Working height: 2.100 cm Nljdjzlhmgepfx Abujh CE mark: yes Condition Technical condition: good Visual appearance: good Mercedes Sprinter with CMC PLA210 – Year 2014 – 92,626 km (ascending) Year of construction: 2014 Mileage: 92,626 km Aerial work platform type: CMC PLA210 Chassis brand: Mercedes-Benz Sprinter Working height: 21 meters Max. load on work basket: 200 kg (including 2 people) Work basket connection: 220V Total weight: 3,410 kg CE certified Price excluding VAT

Condition: ready for operation (used), CMC 3528000M5000TAC-CR PM servo motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nljdpfxoi D Hnxe Abush

Condition: excellent (used), Professional fire-fighting motor pump from the renowned German manufacturer Ziegler (Albert Ziegler GmbH). This device is designed for water transfer—ideal for fire departments, agriculture, construction sites, and industrial applications. Robust, compact build on a transport frame (can be transported with a forklift truck). Nedjz Smxzspfx Abuslh The pump is in good technical condition and complete as shown in the photos. Technical data: - Manufacturer: Ziegler (Germany) - Model: TS 8/8 - Year of manufacture: 1992 - Output: 800 l/min - Operating pressure: 8 bar - Speed: 4,400 rpm - Engine: petrol/gasoline - Operating hours: approx. 56 h - Weight: approx. 143 kg (ready for operation) - Standard: DIN 14410 / 14420 Condition: - Used - Normal signs of use - Technically flawless and fully operational Scope of delivery: - Ziegler motor pump - Firefighting couplings - Complete set as shown in the photos Additional information: - The price refers to 1 unit of the pump - Sold as shown in the pictures - Can be shipped on a pallet or collected in person

Year of construction: 1987, condition: ready for operation (used), Knife grinders for 800 kofama lignum strips Sharpening bar 800 used 1987 Rating: Table Model: Nljdpjh S Upiofx Abujh 800 Description: 800 grinders with a slat knife

Year of construction: 1999, condition: used, functionality: fully functional, We are offering this used CMC Cevenini ET7 roll slitting machine, manufactured in 1999, for sale. The machine has been fitted with a new control system and is in good used condition. Only the compressed air hoses should be replaced when the opportunity arises. The machine is currently out of operation and is being sold due to a new acquisition and space constraints. Nsdszzq E Repfx Abuelh It is ideal for beginners who are looking for a reliable machine in the adhesive tape or film segment. It is also excellent as a core cutting machine. The price is negotiable. We welcome suggestions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2012, power: 6 kW (8.16 HP), TECHNICAL DETAILS General Information Machine Type: Track-mounted aerial work platform Manufacturer: CMC Model: SUP19 Year of Manufacture: 2012 Working Range Working Height: 19 m Lateral Reach: max. 11 m Drive and Power Supply Nodpfsz Sdu Tsx Abujlh Drive: Diesel Power Supply: 230 V EQUIPMENT New battery Tima lightweight trailer

Condition: good (used), Robust 800 Roll-to-Sheet Slitter Machine in very good condition, ready for production. Slitting and cross-cutting machine, roll-fed. Sheeter Ideal for bookbinding veneer, paper, canvas, eco-leather, PVC, plastics, self-adhesive foil, etc. Easy format setting, computer control. Manual and automatic operation. Technical specifications: Total power: 3.5 kW Working width: 800 mm Maximum roll diameter: 600 mm Maximum roll weight: 250 kg Feeding/cutting length controlled by computer Nsdpfx Aj Ad Hi Iobuelh Working speed adjustable via inverter Approximate dimensions (L x W x H): 1970 x 1310 x 1400 mm Weight: approx. 1100 kg Includes a sheet outfeed table.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, We have a CMC PRATICA poly foil wrapping machine available. Year 2009, used. Configuration: 1 mail feeder shuttle, 3 rotary feeders, foil wrapping section, conveyor. Minimum: 100 x 120 mm. Maximum: 250 x 350 mm. Max mailpack thickness: 30 mm. Foil thickness: 20–100 microns. Maximum speed: 10,000 pieces per hour. Nodpexlgp Tsfx Abuelh

Condition: used, Year of construction: 2024, EMOD FHKFIE3 450L/6C Industrial Electric Motor – 800 kW Heavy-duty industrial electric motor suitable for variable speed/frequency converter applications. Technical specifications: Nledpfx Absz Dh Rmsujh Manufacturer: EMOD Type: FHKFIE3 450L/6C Motor No.: 8830664 Year: 2024 Rated power: 800 kW Rated voltage: 660 V Δ Rated frequency: 50 Hz Rated speed: 995 rpm Rated current: 850 A Power factor: cos φ 0.85 Efficiency class: IE3 Efficiency: 95.8% Protection class: IP55 Duty cycle: S1 Weight: 6,600 kg Standard: EN 60034 Temperature monitoring: PT100 Variable speed operation: 5 Hz – 99 rpm 50 Hz – 995 rpm 90 Hz – 1,790 rpm Frequency range: 5–90 Hz Equipped with a separate forced ventilation motor: EMOD FHEIE3 FOL100LA/4 3.0 kW 400 V 50 Hz 1,445 rpm IP55 The motor is industrial surplus and is offered in its present condition. Sold as-is, without warranty, and without the possibility of claims.

Condition: excellent (used), For sale: Professional SOYER BMS 800-90 stud welding machine from a renowned German manufacturer. This device is designed for industrial stud welding using the spitzenzündung (contact ignition) method. Ideal applications: - Steel construction - Industrial production - Metalworking and assembly workshops ⚙️ Technical data: Manufacturer: Heinz Soyer Bolzenschweißtechnik GmbH Model: BMS 800 Type: BMS 800-90 Year of manufacture: 1991 Power supply: 220 V Frequency: 50–60 Hz Charging voltage: 60–190 V Capacity: 90,000 µF Max. current: 8 A Protection class: IP21 Made in: Germany (West Germany) 📦 Included: - Control unit Njdpfx Abez Smnveuolh - Welding gun - Power and work cables - Ground clamp 📊 Technical condition: - Used device - Shows normal signs of use consistent with operation - Visual condition as shown in the photos - Not tested under full load ✅ Advantages: - Robust industrial-grade construction - Proven German technology - Compact and mobile casing - Easy operation 🚚 Shipping: Courier shipping or personal collection available. International shipping is possible.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Z-axis: 550 mm, controller model: SIEMENS SINUMERIK 840 D, table width: 350 mm, table length: 850 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between November 16, 2026, and November 26, 2026! The machine’s spindle was recently replaced! TECHNICAL DETAILS Travel distance X-axis: 800 mm Travel distance Y-axis: 500 + 50 mm Travel distance Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool positions: 40 Table length: 850 mm Table width: 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Nsdpfez Il Nzsx Abuolh Weight: 10,000 kg EQUIPMENT Chip conveyor KNOLL Paper band filter system KNOLL Zero-point clamping system SCHUNK SDE 138 Tool holders and tools in the tool changer Measuring probe as shown in the pictures Note: A truck with a width of 3,000 mm is required for transport. External reference: Wittner - Lot 11

Condition: used, Year of construction: 2019, - Brand : CMC / Renault - Type : PLA 220 - Year of manufacture: 2019 - Weight: 3240 kg. - Hours : 490 hours - Odometer: 223,295 km. - Tow hitch: 3500 kg. - Working height: 22 meters - Side reach: 15 meters - Automatic stamping - Return home function - Memory function - New safety inspection possible - Aerial work platform book with maintenance history available - CE document present - Belgian registration, NL plate possible - Video on our website - Trade-in and transport possible * Brand: CMC / Renault *Type: PLA 220 * Construction year: 2019 * Weight: 3240 kg. * Working height: 22 meters Lateral reach: 15 meters Mileage: 223,295 km. Nsdjzwvucjpfx Abuelh Tow hitch: 3500 kg. * Hours: 490 uur Video on website: Yes Aerial work platform book: Yes CE document: Yes

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,800 kg, table width: 800 mm, table length: 920 mm, overall weight: 14,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 33, Control system: HEIDENHAIN iTNC 530 with smarT.NC Tool interface: HSK-A63 Machining: 3-axis simultaneous Njdpfx Ae Aba Thebuolh Special equipment: - 3D touch probe system - Tool measurement - Electronic handwheel - Roller-type roof guard FREE DELIVERY!

Condition: used, Year of construction: 2019, operating hours: 22,000 h, functionality: fully functional, turning length: 650 mm, spindle motor power: 15,000 W, spindle bore: 76 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 4,500 rpm, bar passage: 76 mm, total height: 2,340 mm, total length: 2,334 mm, total width: 3,550 mm, overall weight: 11,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Multi-axis turning and milling center including a short bar loader from Samsys - SMW Autoblock chuck BBM 210 - SMW Autoblock chuck BBM 210 - Chip conveyor - Tool measuring arm Renishaw - Bar loader interface - Part gripper from the sub-spindle including conveyor belt - Oil separator - Air conditioning unit for the control cabinet - SAMSYS bar loader MULTI 3000 with numerous accessories - Chuck purging system - Automatic door - 6 driven tools on the X-axis - 6 driven tools on the Z-axis Nledpfx Ajz Uxh Ejbujh - Numerous basic setups - Collet chuck for the main spindle with collets - Fanuc 0iTF with a 15" monitor - 10 bar coolant - 2 x 16-position turret

Year of construction: 2016, condition: good (used), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact yet highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting, and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Machine No.: 100 586 Working width: approx. 320 mm Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport Njdpoz Ea N Rsfx Abuslh • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ UNWINDING The machine includes a professional unwind section for roll-fed production. Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING

Condition: excellent (used), Year of construction: 2021, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Njdpfx Aez Ha H Sebuelh Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: good (used), Manfred Rachner R 800 PA/R+S pile turner The unit is like new, fully functional, and ready for operation. Technical specifications: Format: 860 × 600 mm Stack height: 1300 mm Load capacity: 800 kg Machine weight: 750 kg Power supply: 380 V Features stack aeration and jogging; controlled by frequency inverters. Operated via a control panel; fast performance; hydraulic drive. Quiet operation. Documentation included. Compact design; requires minimal space. Njdpfoz S Uy Sex Abujlh

Condition: excellent (used), Year of construction: 2011, operating hours: 39,090 h, functionality: fully functional, machine/vehicle number: 14390, travel distance X-axis: 1,350 mm, travel distance Y-axis: 970 mm, travel distance Z-axis: 1,300 mm, total height: 4,150 mm, total length: 8,500 mm, total width: 5,500 mm, overall weight: 32,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, operating hours of spindle: 8,407 h, coolant supply: 80 bar, spindle motor power: 30,000 W, spindle nose: HSK-A100, number of slots in tool magazine: 60, Equipment: chip conveyor, Travel distances Travel distance X: 1350 mm Travel distance Y: 970 mm Travel distance Z: 1300 mm with measuring system from Haidenhain Pallet size: 800 x 1000 mm Table load: 2000 kg Horizontal/vertical milling table Working spindle Diameter at the front bearing: 110 mm Drive power: (60% duty cycle) 30 kW Drive power: (100% duty cycle) 29 kW Torque: (60% duty cycle) 1088 Nm Torque: (100% duty cycle) 985 Nm Spindle speed: 20…6000 rpm Spindle taper: HSK-A100 Nljdpez Nc Eijfx Abush NC rotary table with 500 rpm Table speed for positioning operation up to 60 rpm Table speed for turning operation up to 500 rpm Operation at 100% duty cycle with speed >200 rpm max. 20 min Workpiece diameter incl. fixture 1400 mm Workpiece height: 1400 mm Workpiece weight incl. fixture up to 60 rpm 2000 kg Workpiece weight incl. fixture above 60 rpm 1200 kg Tangential moment 10000 Nm Tilting moment 20000 Nm Drive power (100% duty cycle) 57 kW Drive torque (100% duty cycle) 2520 Nm Machine is equipped with automatic imbalance detection Tool changer: 60 positions Max. tool diameter: 325 mm Max. tool length: 450 mm Max. tool weight: 35 kg Internal coolant supply through the spindle center up to max. 80 bar Additionally: - Coolant gravity band filter from Knoll - Chip conveyor Knoll - HYFRA industrial cooling system - 1x special pallet for turning with 4 jaw chucks 50-2 D1000mm - 1x exchange pallet with T-slots 800x1000mm - 3x exchange pallet with threaded holes DIN55201 800x1000mm - Pallets without workpiece clamping devices - Electronic handwheel - Optical measuring probe OMP60 from Renishaw Net machine weight with H/V table approx. 32500 kg Space requirement approx. (L x W x H) 8500x5500x4150mm Technical data without guarantee. Errors and prior sale reserved.