CNc 5 axis vertical machining center

Mazak VTC-800/30SR

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, functionality: fully functional, Mazak VTC 800/30SR CNC machining center (2009) Manufacturer: Mazak Type: VTC 800/30SR CNC machining center Year of manufacture: 2009 Condition: used, currently in production Operating hours: 34,000 hours Spindle speed: 18,000 rpm Tool magazine: 48 tools Further information will follow. Bedpfx Alozy Ac Se Asdh

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Feed force axis X and Z: 24000N Table size 1250 x 800 mm Table load: 800kg Programing resolution: 0,001mm Bdedpfx Asunwd Tol Ajh Documentation for machine Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.

Condition: ready for operation (used), Year of construction: 2015, A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible. Bedpox Ih Dmefx Al Aodh

Condition: excellent (used), Year of construction: 2019, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, Bodpfezd Eqasx Al Asdh B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Bedpszl Hbcjfx Al Aodh Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. • High-pressure coolant (15 bar) • Auto tool length measurement x 2 units • Visiport • 19" screen • Siemens software P • Signal tower • Additional work light • RMP60 probe • Bracket for NCRT for vertical use • Table centre partition • 48-tool magazine Additional equipment Bdjdpfx Ajx D I A Sel Ash • Consep 2000 (chip conveyor/coolant system) for 15 bar, left-hand discharge

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 36.5 [kW] - Spindle speeds : 12000 [rpm] - B Rotary Axis : 90 [°] (+/-) LINEAR AXES - Travels on X/Y/Z axes : 1525 / 660 / 610 [mm] - Rapid traverses rates (X/Y/Z) : 32 / 32 / 24 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1680 x 660 [mm] - Distance table / spindle nose (min./max.) : 12.7 - 622.3 [mm] - Maximum weight upon table : 1360 [kg] - Diameter of the C-type rotary table : 600 [mm] - Travel : 360 [°] - Maximum load on the rotary table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 69 [kVA] WEIGHT & DIMENSIONS - Machine weight : 9.800 [kg] EQUIPMENT - CNC : WinMax / MAX5 - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit Bodpfx Aley Tzc Hj Aedh - Tool probe

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Bsdpfezc D Enjx Al Ajdh Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2020 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: d 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 Tool holder: HSK-A 63 Feeds: Rapid traverse (x/y/z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swivel milling head (B-axis) - Integrated rotary table, arranged on the left, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter, 600 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rotary coupling for spindle - Flushing gun for chip flushing - 2x oil and emulsion mist separators - Blow-off air through the spindle center - Infrared measuring probe, Heidenhain TS 460 (if available) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating mode 4 - ATC (Application Tuning Cycle) Bjdpez A Ap Iofx Al Aodh - Preparation for Hofmann dividing head RW-NC 300 (dividing head not included) - Alternating operation - Tool breakage monitoring TRS2 - Tracy surface interpolation Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, total height: 3,800 mm, total length: 7,000 mm, total width: 5,550 mm, table length: 1,600 mm, table width: 1,200 mm, table height: 965 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, overall weight: 26,500 kg, The LAGUN BM 3 RT is a highly stable bed-type milling center with a rotary table, offering high flexibility, stability, precision, and economical operation – all without the need for complex foundation work. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical features: Control system: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Bdsdpoq I Ncqefx Al Ajh Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with dual gripper Chip disposal: 2 x hinge belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare an individual offer.