Used Conformal Coating Unit for sale (34,036)

Condition: used, Year of construction: 2022, Fresh machines with little use. Hjdpfoyi Uqbjx Airjfl Several units available from vintage 2022 to 2023. Please ask for specifications and pricing!

Year of construction: 2025, condition: new, A conformal coating machine is an industrial device used in electronics manufacturing to automatically apply a protective conformal coating to printed circuit boards (PCBs). This coating shields sensitive electronics from external influences such as moisture, dust, chemicals, corrosion, and temperature fluctuations. The machine applies a thin, uniform protective layer to selected areas of the PCB. This process is fully automated and reproducible, which is essential for quality and reliability in serial production. Transport System Transports PCBs through the machine (inline or stand-alone). Coating Application Depending on the configuration: - Spray coating (selective or full coverage) - Jet coating - Film or mist application techniques XYZ Positioning and Motion System Provides precise control of the spray valve. Vision and Camera System (optional) For alignment, inspection, and process monitoring. Masking / Selective Coating Protects connectors, test points, and other areas not to be coated. Drying or Curing Module For UV, thermal, or air curing, depending on the coating material. Control Software Programmable for various PCB designs and coating recipes. Hfedjydnlhopfx Airol Suitable Coatings - Acrylic - Polyurethane - Silicone - Epoxy - UV-curable coatings Applications ICT conformal coating machines are widely used in: - Automotive electronics - Industrial control systems - Medical equipment - Aerospace - Consumer electronics Advantages - Consistent and high coating quality - Reduced material waste - High repeatability - Suitable for mass production - Improved reliability and lifespan of electronics

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Hfedpfxozinzle Airsl Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Year of construction: 1989, condition: used, LACO 52 Inline Coating System Supply voltage: 220V Weight: 84 kg Coat volume: 3.5 liters Hfjdpfx Aiezrm R Rersl

Condition: used, A full coating unit, with its equipment, designed for coating products by means of a continuous or discontinuous spraying process. Additional documents : Plan implantation équipements + système cip . pdf 1 Glatt GC 750/500 coating unit – drive motor : 1,1 kW – 380 V – 50 hz – IP 54 – Ex - ventilateur d'entrée d'air : 1000 m3/h - 6860 trs/min - 2’003 Pa - Max 80°C - 1,1 kW - IP 54 – air inlet fan : 1000 m3/h – 6860 rpm – 2’003 Pa – Max 80°C – 1,1 kW – IP 54 – air outlet fan: 1200 m3/h – 2900 rpm – 1’030 Pa – Max 80°C – 7,5 kW – IP 55 – Drum speed: 2 – 18 rpm – Sold with two perforated drums ⌀500mm and ⌀750 mm – Adaptable 2-head spray arm + Peristaltic pump– Spare parts, seals, … - Capacity : 20L : 7 to 15 kg 60L : 30 to 45 kg 1 Dust collector Herding FilterTechnik Extraction air volume: 1200 m3 / h Extraction air volume: 1200 m3 / h 1 Wanson CD-36 steam boiler - Power: 36 kW – Steam output: 48 kg/h – Operating pressure: 5 bar – Temperature : 159°C – Water volume: 10 L 1 Cleaning system (CIP) Hfjdpox R Amnjfx Airel Used for easy cleaning and maintenance of the machine.

Year of construction: 2008, condition: used, Manufacturer : Dumoulin Model: TD 20 Year: 2008 Hodpox R A Tnofx Airjfl Type : Coating pan Coater type: solid drum for impregnation Rotor diameter: Ø 700 mm Rotor depth: approx. 550 mm Unloading: automatic by reversing the rotation of the cylinder Spraying: Axflow pump + Endress Hauser Promag 53 magneto-inductive flowmeter (year 2021) Air handling unit : not available, controllable from electrical cabinet. Reference available in documentation Siemens PLC and control panel

Year of construction: 2012, condition: used, Machine is in operational condition and recently taken from the operation. Hfedoxm S Htopfx Airol Machine is located in Estonia and is available to be shipped. Ask for additional information!

Year of construction: 2008, condition: used, Operational condition machine! - 4 axes - Component height up to 100 mm Hfedpfxexlflge Airsl - 3 valves - 2 tilters for valve inclination - 2 tanks - External programming PC

Condition: used, Year of construction: 2023, Operational machines! Hodpfjwctnaox Airofl Ask for additional information!

Condition: used, Year of construction: 2021, Machines in operational condition! Hjdpfx Aowcrthjirsfl Ask for additional information!

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ Hfodpfx Aswfhu Hsirjl ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Hjdpfx Aiozqur Hsrjfl Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: used, 5 x Horiba Analyser Units MEXA-7400 SLE, CVS-7200SLE & MEXA-7500D Analysing Accuracy +/- 1 % Full Scale, Response 2.0 Seconds Analysing: THC,CO,CO2,NOx,CH4. Horiba Analysers With Dilute 3 Phase Bagged Emissions And 2 Direct Raw Sample Lines (Pre & Post Cat) Hfodpfx Aozvc U Hjirjl

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,400 mm, total height: 2,210 mm, total width: 1,505 mm, type of input current: three-phase, warranty duration: 24 months, temperature: 250 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, Equipment: emergency stop, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ PEF-2.5 ELECTRIC POWDER FIRING OVEN WIDTH (INTERIOR): 1,505 mm HEIGHT: 1,800 mm (from the air duct) LENGTH (INTERIOR): 2,500 mm ➢ The thermoblock unit measures 785 x 1,800 x 2,210 mm. The heating capacity is 30 kW/h. A circulating fan is 1.5 kW/h (1 pc.), and an exhaust fan is 0.54 kW/h. ➢ Double-leaf door with thermal insulation and silicone seal. ➢ Guide rails are manufactured for trolleys in the dimensions indicated on the floor panels. ➢ Specially designed air duct ensures uniform air distribution in the curing oven. ➢ The electrical switchgear is made of Siemens and Schineider. This curing oven does not have a PLC system. PLC is available as an option. ➢ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an audible and light signal is emitted by the buzzer. ➢ Additionally, a product transport cart with cast wheels is located inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200mm (dimensions including fan) ➢ Teflon filters: 4 pcs. ➢ Filter suction fans: 4 kW x 1 pc. (6,000 m3/h – 200 mm SS) Hsdpjwdtfusfx Airsfl ➢ 36 W LED lighting x 1 pc. ➢ Bottom drawer x 1 pc. ➢ Control panel for controlling air intake and pressure blasting ➢ DELTA frequency converter ➢ Heavy-duty rollers under the paint booth. ➢ An additional filter is located at the fan outlet. ♨️ Ramp heating mode (optional) Precisely control temperature progression and dwell times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: Hjdswzl Hxepfx Airjfl These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Hjdpfxsyil A Sj Airsfl Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 9941 / 09/20, inner dimension width: 1,100 mm, inner dimension length: 660 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! TECHNICAL DETAILS Working area (H x W x D): 550 / 800 × 1,100 × 660 mm MACHINE DETAILS Air pressure: up to 8 bar Dimensions & Weight External dimensions: 1,785 × 1,250 × 1,250 mm Other dimensions: 1,300 × 1,300 × 1,700 mm Weight: approx. 350 kg Working floor load: max. 350 kg Voltage supply: 230 / 400 V, PE/N Mains frequency: 50 Hz Hedpjzx S Iusfx Airefl Fusing: 3 × C16 A Rated current L1: 0.8 A Rated current L2: 0.7 A Rated current L3: 0.6 A EQUIPMENT Operating manual CE / conformity documents

Year of construction: 2011, condition: used, Used Hauzer Techno Coating HTC-1500/4-SpuUC/2-Spu/1-P coating system for sale, manufactured in 2011. Second-hand industrial coating equipment for manufacturing applications. Industrial system for sale for international buyers seeking used Hauzer coating systems, surface treatment equipment, coating machinery, and manufacturing equipment through an industrial auction. Hfodpfozwfiisx Airsl

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. Hfedpfswzmcbjx Airel • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 30 kg, arm reach: 650 mm, pivoting range: 360 °, teach pendant manufacturer: Fanuc, Fanuc SR6IA-30P-C-CENR Robot complete with Controller. 8+ units available from October 2026 Robots were installed in an IMA line that was created for a special project but never commissioned. So even though the robots have been installed in the line, they were never commissioned prior to the special project being terminated. Lines are still in their original crate from IMA. FANUC SR-6iA - Type: SCARA Hfodpfx Aszzplcoirjl - Axes: 4 — J1, J2, J3, J4 - Payload: 6 kg - Horizontal reach: 650 mm - J3 vertical stroke: 210 mm - J1 range: ±148° - J2 range: ±150° - J4: ±360° - Repeatability: approximately ±0.01 mm for J1/J2/J3 - Robot weight: 30 kg - Typical applications: pick & place, assembly, inspection and packaging - Controller: R-30iB Plus for the current configuration.

Condition: good (used), 1 x Coating Drum 4m long. Infeed diameter 750mm. Hfsdpfxozz It So Airsl Outfeed 1m

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) Hjdpfxoyc H I Se Airsfl • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fanuc M Series Robot Unit Complete - Type: M1IA0.5A-30P-O-CE..+ The M-1𝑖A/0.5A is a high-speed, 6-axis Delta robot, ideal for compact, high-speed order picking and assembly applications. With a payload of 0.5 kg and a work envelope of up to 280 mm, this robot is perfect for small parts handling processes requiring high versatility in industries such as electronics, precision engineering, food, medical and pharmaceutical. Its unique delta design mechanism is ideal for fast, dexterous assembly applications. It can also easily cover an additional range of applications by simply adding another optional 500 g of payload. - Robot: M-1iA/0.5A - Robot type: Delta / parallel robot - Axes: 6 - Standard payload: 0.5 kg - Optional payload: up to 1 kg - Reach: 280 mm - Repeatability: ±0.02 mm - Weight: FANUC lists the mechanical unit itself at around 17 kg in some documentation. - Mounting: floor, ceiling/inverted or angled - Protection: IP20 - Typical controller: R-30iB Plus / R-30iB Mate Plus depending on configuration. Hjdpszzpuwjfx Airefl

Year of construction: 2020, condition: good (used), Gough Engineering Sieving station and filtration unit Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph Hodpfx Aozvlk Doirefl

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Hjdsya Hvqopfx Airjfl Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase