Used Cpm 7930-4 for sale (58,970)

Condition: used, Pellet press Manufacturer: CPM Model: 7930-4 Iijdpfx Apey E Rrboheg Year: 2019 Complete with feed mixers

Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h We used it for about 5 years. It was purchased used but in very good condition. All bearings were replaced 1 year ago. It was working very well before it was disassembled. A new die with rollers has been manufactured for it and is available for an additional price. Iodpfx Aex S Ibgjphoig For additional information, please write on Whatsapp.

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Iiodpfx Aeympx Ujphog

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 01 Crumbler, type of input current: three-phase, year of last overhaul: 2026, working width: 1,800 mm, roller length: 1,400 mm, CPM PELLET 855 CRUMBLER Model 855 DA Manufactured in 1988 Rated capacity of 20 tons per hour. Ijdpfx Apsz Aryxshoig Consisting of the following: 2 x 11 kW, 1800 RPM, 3-phase, 440V motors 8-inch diameter x 55-inch long chilled cast iron rolls.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Manufacturer - N&N Nadratowski. Model - MG-450/160. Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Iijdpewplc Asfx Aphog Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516327000881, Year of construction: 2007, operating hours: 15,936 h, load capacity: 4,000 kg, lifting height: 4,910 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, TECHNICAL DETAILS Lifting capacity: 4,000 kg Lifting height: 4,910 mm Free lift: 0 mm Fork length: 1,200 mm Minimum fork width: 440 mm Maximum fork width: 1,150 mm Number of wheels: 4 MACHINE DETAILS Mast type: Duplex Operating hours: 15,936 h Drive: Electric Battery voltage: 80 V Battery capacity: 930 Ah Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,250 x 3,180 mm Shipping weight: 6,777 kg EQUIPMENT Fork adjustment Side shift Full cabin Radio Joystick Heater Work lights Ijdpjzza Stefx Aphsig Documentation CE marking

Condition: used, Year of construction: 1990, 1990 Innse 4 Aries CF-S-WZ 150 CNC Horizontal Multi Pallet Milling Machine with Siemens Sinumerik 880M Control Iedpfx Ajzvp I Tjphsig Maximum Table Load 100 Ton. Maximum Spindle Speed 2,500rpm (60kW Motor). Axis Travel 'X'=11,800mm, 'Y'=3,500mm, 'Z'=800mm, 'W'=1,150mm. Spindle Taper ISO 50. 300 Position ATC. S/N: 1858. With Angle Heads & Coolant System. Note: Machine Has Problems With The Head & Electronics.

Condition: excellent (used), Year of construction: 2017, operating hours: 400 h, functionality: fully functional, Equipment: compressor, documentation/manual, High-end (!) Austrian Brewery, newly purchased in 2017 directly from the owner. It has been used less than 100 times ever since because it is positioned at a remote location away from the main brewery. It has been maintained very well, ready for inspection. Ideally for brew-pubs. It is 5HL machine but can do 2 brews simultaneously, so effectively it can be considered a 10HL machine. It has 4 Uni-tanks of 12 HL and all the necessary equipment, such as cooling, to make it a turn-key brew installation of a premium quality. Also all necessary hoses plus a mobile pump for CIP of the Unitanks, etc. Original documentation available, in German, showing that all equipment was purchased at the Labu factory. This whole set would currently cost approx. 240.000€ (ex VAT, ex works). Delivery possible per direct after dismantling. We could provide a proper instruction / training by one of our senior brewers. Ijdpfx Apozz Rlwohoig Current asking price is approx. 135K€, ex VAT ex work but including instruction. The brewery is located in the Amsterdam area, the Netherlands

Condition: like new (used), Year of construction: 2015, machine/vehicle number: Nr.2012/15, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, total width: 2,000 mm, total length: 9,085 mm, total height: 2,713 mm, overall weight: 1,400 kg, 1. Technical Specifications Parameter Specification / Value - Manufacturer / Brand Schraml Glastechnik GmbH (LiSEC / LiTROS Group) Ijdpfoz A D Rtex Aphoig - Model / Type topCLEAR TC 20 Super-4 - Serial Number 2012/15 - Year of Manufacture 2015 - Direction of Operation From right to left (R → L) - Working / Operating Height 580 mm - Maximum Washing Height 2,000 mm - Glass Thickness 3 – 20 mm - Minimum Glass Dimensions 300 mm x 50 mm - Number of Washing Brushes 4 pieces (2 pairs for double-sided intensive cleaning) - Transport Speed Adjustable, 1 – 5 m/min - Total Weight 1,400 kg - Dimensions: L: 9085 mm H: 2700 mm W: 2000 mm

Condition: like new (used), Year of construction: 2016, functionality: fully functional, From year 2016 but has never been in use. As new. The machine has never been used in production. We have only tested it for a short period of time. Data: Opening: 600X1.050 mm. Rotorlenght: 600 m. V-rotor with 28 reversible knifes. Motor: 18,5 kW. 400V, 50 hz. RPM: pp. 100. Weight: 1300 kg. Lenght/width/height: 2.045X1.165X1.640 mm. Original manual included. WEIMA - Made in Germany. Very good for wood, plastic, composite ect. IN STOCK. Iedpfx Apoz Dg Iqsheig We ship all over Europe.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Iiodpfxjzx N Ths Apheg Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Load capacity: 2,722 kg Max. tool diameter: 75 mm Max. tool diameter with free adjacent tool positions: 127 mm Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Tool positions: 40 EQUIPMENT Spindle cooling Chip conveyor

Condition: used, Year of construction: 2015, edge thickness (max.): 22 mm, feed rate X-axis: 25 m/min, milling spindle speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Pre-milling unit Manufacturer/Model: RT-E Motor power: 4 kW Gluing Preheating lamps: for heating the panel side PUR pre-melter: Nordson PURBLUE 4-HO Glue application unit: 100 V End-capping unit Manufacturer/Model: YU/SP750 Number of motors: 2 Positioning: NC-controlled Milling unit Manufacturer/Model: Type U Motor power: 4 kW Speed: 12,000 rpm Engagement: automatically time-controlled Iodpfszmvpxex Apheig Polishing unit Number of motors: 2 TECHNICAL DETAILS Min. panel height: 10 mm Max. panel height: 62 mm Min. panel length: 380 mm Min. panel width: 55 mm Min. edge thickness: 0.4 mm Max. edge thickness: 22 mm Max. feed rate: 25 m/min Pressure: rubber belt MACHINE DETAILS Control system: PC control EQUIPMENT CE marking Rubber belt pressure Panel support guides Pre-milling unit RT-E Preheating lamps for panel side PUR pre-melter Nordson PURBLUE 4-HO End-capping unit YU/SP750 Milling unit Type U Polishing unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6527

Year of construction: 2016, operating hours: 9,580 h, condition: excellent (used), functionality: fully functional, Edge Polisher Comandulli Musa 7+4 DX Partially processed meters – 5578m Total operating hours – 9580h Working direction: from right to left - Advance/feed speed (conveyor belt) 0–3 m/min - Belt width 600 mm - Working thickness 10–80 mm - Min. working width 80 mm - Max. working width (without bar) 1200 mm - Max. working width (with bar) 3000 mm - Loading plane height 750 mm Aggregates: - Calibrating spindle for vertical and horizontal positioning for a 260 mm diameter flat diamond wheel - Edge polishing spindles no. 7 with floating mechanism – oscillation - Beveling spindles no. 4, the first two beveling spindles (no. 1 upper and no. 1 lower), inclined at 45°, are equipped with the mechanical locking system TMM3. Two spindles at 45° (no. 1 upper and no. 1 lower) for polishing the previously generated bevels. Iodpezipzgefx Aphoig Automatic valves for the water 2 roller tables, 1.5 m each Color touch screen Rated output 22 kW Dimensions (excluding rollers) 5.15 x 1.8 x 1.74 m Weight 4000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 600007090, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, working width: 3,100 mm, sheet thickness (max.): 13 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 280 mm Diameter of lower rollers: 280 mm Max. sheet thickness: 13 mm Max. pre-bending thickness: 10 mm Max. working width: 3,100 mm Bending speed: 5,000 mm/min Drive: Hydraulic Control: Conventional Power: 15 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,810 x 1,980 x 1,540 mm Isdpfx Apezxdk Iohjig Weight: 11,500 kg Transport packages: 2 EQUIPMENT CE marking

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). Iedpfx Ajyvac Ajphsig This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Condition: excellent (used), Year of construction: 2014, operating hours: 443 h, Model Amada HFE MK2 80 x 2500 , 4 axis Hydraulic Downstroking Press Brake VERY LOW HOURS 443 Year 2014 Tonnage 80 tonnes Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Iedezmtqajpfx Aphjig Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1969, machine/vehicle number: HS 205-4, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 900 mm, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 175 bar, overall weight: 2,500 kg, total length: 2,600 mm, total width: 1,950 mm, total height: 1,400 mm, Equipment: emergency stop, foot remote control, A Wila brand plate shear in very good condition. It is comparable to the Safan brand. The machine is somewhat older. The back gauge moves very smoothly, but currently needs to be adjusted manually. It does not have a drive mechanism. Iisdez Dgttepfx Aphsg

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 9941 / 09/20, inner dimension width: 1,100 mm, inner dimension length: 660 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! TECHNICAL DETAILS Working area (H x W x D): 550 / 800 × 1,100 × 660 mm MACHINE DETAILS Air pressure: up to 8 bar Dimensions & Weight External dimensions: 1,785 × 1,250 × 1,250 mm Other dimensions: 1,300 × 1,300 × 1,700 mm Weight: approx. 350 kg Working floor load: max. 350 kg Voltage supply: 230 / 400 V, PE/N Mains frequency: 50 Hz Fusing: 3 × C16 A Rated current L1: 0.8 A Rated current L2: 0.7 A Rated current L3: 0.6 A EQUIPMENT Operating manual CE / conformity documents Iijdezx S Iuopfx Aphog

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Automatic sawing center for PVC profiles, consisting of an infeed buffer, an outfeed buffer, and the main machine, model Thorwesten ASZ 4. Processing length 6,500 mm, max. profile width = 165 mm, max. profile height = 165 mm, Schüco system. Continuously variable cutting angles from 45° to 135°. Automatic optimization and processing of cut-offs. Saw blade diameter 500 mm. Iiodpjz Dk Etsfx Aphjg Includes dust extraction system and waste conveyor belt, as well as an elevating conveyor. WINDOWS 10 operating system. Profile measuring device. Label printer. Two-bag dust collection system. Extended infeed and outfeed buffer depth.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, 1 x Ethercat servo-driven horizontal flighted conveyor. This conveyor has an advanced servo system with a matched drive and motor which only works off Ethercat plc systems. Perfect for accurate 'start / stop' work. Manufacturer - Jinan Hiwell Machinery Co. Ltd. Model - LPJ600-4. Serial number - 1661962. Isdpfjzdvb Nox Aphjig Date of manufacture - 2020. Belt dimensions - 3900mm L x 600mm W. Electrical requirements - 220 V / 50 hz / 1 phase.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7.376.230.761, functionality: fully functional, operating hours: 2,216 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Iiodpfx Ajzzbafepheg Finger guard CE marking CE certificate Documentation Tools

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 1.000.022.855, functionality: fully functional, overall weight: 3,500 kg, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Iodpfszzbcmex Apheig The machine has the following configuration: 1. Unit: Pre-milling unit 2. Unit: Gluing unit 3. Unit: Pressure rollers 4. Unit: Trimming unit 5. Unit: Rough milling unit 6. Unit: Corner rounding unit 7. Unit: Edge finishing unit 8. Unit: Brushing unit TECHNICAL DETAILS Min. edge band thickness: 0.4 mm Max. edge band thickness: 3 mm Max. edge band height: 64 mm Min. panel thickness: 10 mm Max. panel thickness: 60 mm Min. panel width: 85 mm Max. panel width: 3,200 mm Min. panel length: 140 mm Max. panel length: 3,200 mm Min. feed rate: 12 m/min Max. feed rate: 18 m/min Feed rate control: variable Max. spindle speed: 12,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 20 A Fuse rating: 32 A Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,200 x 2,200 mm Machine weight: 3,500 kg Number of transport packages: 1 EQUIPMENT Tools for pre-milling unit Tools for pressure rollers Tools for trimming unit Tools for rough milling unit Tools for corner rounding unit Tools for edge finishing unit Tools for brushing unit CE marking Documentation

Condition: used, Year of construction: 2017, Excellent opportunity to acquire a well-maintained Bystronic BySprint Fiber 4020, equipped with a 6 kW fiber laser source and ByTrans Extended automatic loading and unloading system. Machine Highlights - Year of manufacture: 2017 - Laser power: 6 kW Fiber - Cutting hours: Approx. 2,539 hours - Working area: 4,000 x 2,000 mm - Automatic loading/unloading: ByTrans Extended - Control system: ByVision with 22" touchscreen Iodpozw Nfnofx Aphsig - Dual shuttle table system for maximum productivity Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Year of manufacture: 2017 * Laser power: 6 kW Fiber * Cutting hours: Approx. 2,539 hours * Working area: 4,000 x 2,000 mm * Automatic loading/unloading: ByTrans Extended * Control system: ByVision with 22" touchscreen

Year of construction: 1991, operating hours: 19,888 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1.844, MACHINE DETAILS Control system: CNC Operating hours: 19,888 h Iedpfx Apezxcl Rjheig

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X352N00989, operating hours: 2,488 h, load capacity: 4,500 kg, lifting height: 6,925 mm, fuel type: diesel, mast type: triplex, construction height: 2,940 mm, fork length: 1,150 mm, TECHNICAL DETAILS Lifting height: 6,925 mm Free lift: 2,330 mm Load capacity: 4,500 kg Fork length: 1,150 mm Fork carriage width min.: 240 mm Fork carriage width max.: 1,350 mm Number of wheels: 4 MACHINE DETAILS Mast type: Triplex Drive type: Diesel Engine manufacturer: Perkins Operating hours: 2,488 h Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,450 x 2,940 mm Unladen weight: 7,150 kg Ijdpfx Ajzza T Dopheig EQUIPMENT Semi-cab Work lights 3rd and 4th hydraulic valve for fork carriage Documentation available CE marking