Used Cts Temperature Test Chamber, Explosion-Proof for sale (19,058)

Condition: used, CTS   Type: T-30/950 Ex/I   CTS Temperature Test Chamber, Explosion-Proof   Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site control of the test item   Temperature tests:   Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate:   Heating: 2 K/min Cooling: 1.5 K/min up to -10°C   Heat radiation: approx. 1000 W at +20°C approx. 200 W at -25°C   Isdpjzd Rzwjfx Am Djih Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is initially purged with a large volume of N2 until the oxygen content is less than 3%. After that, it switches to a base flow rate (approx. 10% of the large volume). The nitrogen flow rate of the base flow is measured, displayed, and monitored using a flow meter and limit switch. The O2 monitoring continuously extracts gas from the test chamber via a flame arrester and feeds it to an O2 sensor, which monitors the residual oxygen content of the extracted air. The gas is then passed through a second flame arrester and returned to the test chamber. The extraction pump is monitored using a volume flow meter. Further details can be found in the operating manual from Dräger in the appendix.   The gas system is currently out of operation!   The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without irradiation, and without additional equipment.   Dimensions: Test volume: 950 liters Test chamber dimensions: height approx. 700 mm / width approx. 900 mm, depth approx. 1500 mm External dimensions: height approx. 2400 mm / width approx. 1270 mm, depth approx. 3125 mm   Operating data:   Electrical connection: 400V+6/-10 %, 3/N, 50 Hz Rated power: 21.6 kW Rated current: 36.5 A   Protection class: IP 54   Condensate drain: unpressurized, R 1/2" internal thread   Sound pressure level: < 62 dB(A)   (according to DIN EN ISO 3744 measured at a distance of 1 m from the front)   Weight: approx. 1500 kg, control cabinet approx. 300 kg   External refrigeration unit   Refrigerant: R404A / R23   For your security as a buyer, the following information:   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and specifications are subject to change!)   We are happy to answer any further questions by telephone.

Condition: used, CTS Type: TS -70/1000-10 For sale: CTS temperature test chamber, model TS -70/1000-10. Cooling: water-cooled refrigeration unit. Compressor has been replaced! Features: Multi-touch control USB and Ethernet interfaces Iiedpjziizyjfx Am Djh Feedthroughs for test cables, 4 × Ø 125 mm Safety temperature limiter Application areas: Environmental and durability testing Temperature cycling tests (stress screening) Quality assurance and research & development Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, width approx. 860 mm, depth approx. 1100 mm External dimensions: Height approx. 1950 mm, width approx. 1270 mm, depth approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Iijdpfx Ajzh Htwsm Deh Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal supports to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Isdpezh D E Refx Am Deih Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: T-70/600 CTS Temperature Test Chamber, Water-Cooled Technical Performance Data: Temperature Operating Range Temperature range -70°C / +180°C Cooling rate 3.0 K/min Heating rate 3.5 K/min Temperature stability, time-related ≤± 0.3 K Iijdpfx Ajziygysm Djh Dimensions: Test volume: 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating Data: Electrical connection 400 V +6% -10%, 3/N, 50 Hz Connected load 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, CTS Type: TS-70/350 Water-cooled Technical specifications: Temperature operating range Temperature range: -70°C / +180°C Rate of temperature change according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions: height, approx. 750 mm, width, approx. 650 mm, depth, approx. 720 mm External dimensions: height, approx. 1800 mm, width, approx. 850 mm, depth, approx. 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg For your peace of mind as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with refrigerants that comply with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Isdjziyphepfx Am Deih Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Temperature testing chamber / Stress screening chamber CTS TS-70/200-5/S temperature testing chamber Temperature testing chamber, -70 °C to +180 °C, approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Device type: Temperature testing chamber / Stress screening chamber Test chamber volume: approx. 200 liters Test chamber dimensions: approx. 650 x 400 x 750 mm (W x D x H) Housing dimensions: approx. 920 x 1345 x 1800 mm (W x D x H) Weight: approx. 550 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 8 K/min Temperature change rate, cooling: approx. 6 K/min Max. heat radiation at +20 °C: approx. 3500 W Actual test run according to protocol: Heating: approx. 10 K/min Cooling: approx. 6.25 K/min Temperature test from -70 °C to +180 °C documented Power connection: 400 V 3/N / 50 Hz Power: 10.9 kW Rated current: 15.7 A Protection class: IP22 Refrigerant pre-cooling stage: R404A Refrigerant quantity pre-cooling stage: 2.5 kg Refrigerant cooling stage: R23 Refrigerant quantity cooling stage: 0.6 kg / 15 bar Operating pressure PS: 25 bar Test pressure PT: 20 bar Operating hours according to protocol: approx. 25,977 h Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side access ports as shown in the pictures Insert grid / Test chamber equipment as shown in the pictures Over-temperature test item protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Accessories as shown in the pictures Iijdjzf Hi Hspfx Am Djh Application areas Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x CTS TS-70/200-5/S temperature testing chamber Insert grid / Test chamber equipment Existing documentation / documents Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding possible. Changes, errors and prior sale reserved. We would be happy to answer any further questions by telephone.

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for external control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Iiedpfx Amjzg Ty Ie Djh Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Refrigerant: R404A / R23 Weight approx. 700 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, CTS Climate testing chamber T-70/600, water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z, refrigerant R23/R404A Control: -Microprocessor-controlled regulation and monitoring system -Simple, user-friendly terminal integrated into the door. -Digital display of setpoint and actual temperature Easy adjustment via +/- buttons -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site Isdpoziycbsfx Am Djih test item control Insert rack: Stainless steel, support surface 820 x 710 mm Load per rack max. 35 kg Total load with max. rack capacity 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate measured in the center of the test chamber according to DIN 50 011, Part 12 Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain, unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, CTS   Type: T-40/600 /011232   CTS Temperature Testing Chamber, Water-Cooled   Including metal supports to increase the floor load capacity   Test chamber volume: 600 liters   Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm   External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm   Temperature operating range:   Temperature range -40 to +180°C   Temperature deviation ±0.1 to ±0.3 K over time   Heating rate: 2.5 K/min Cooling rate: 3 K/min   Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A   Weight: 550 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture) Isdjziyw Sopfx Am Dsih   (Changes and errors in the technical data and specifications are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, CTS Temperature Shock Test Chamber Type: TSS-70/350-A Year of manufacture: 10/2017 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS GmbH (Clima Temperatur Systeme), model TSS-70/350-A. The device is suitable for temperature shock tests and cyclic temperature tests in industry, research, development, and quality assurance. Areas of application: Material testing Aging tests Electronics and component testing Temperature cycling and shock tests Automotive and quality testing Technical data: Manufacturer: CTS GmbH Type: TSS-70/350-A Design: Shock test / Temperature shock test chamber Temperature ranges: Hot chamber: +50°C to +220°C Cold chamber: -70°C to +100°C Electrical data: Rated voltage: 400 V, 3/N, 50 Hz Rated power: 19.8 kW Rated current: 46.5 A Refrigeration system: Pre-cooling stage: R452A, 7.2 kg Cooling stage: R23, 2.8 kg / 11.0 bar CO₂ equivalent: 15.41 t / 41.59 t GWP: 2140 / 14800 Water-cooled Pressure data / Protection class: Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Protection class: IP 54 Equipment / Features: CTS touchscreen control panel Microprocessor-controlled regulation and monitoring system Program operation Digital setpoint and actual value display 2-zone system with hot and cold chamber Trolley system for rapid temperature shock testing Viewing window in the door Integrated control cabinet Water connections for cooling water available Technical design: Hot and cold chambers are separated Trolley system for rapid temperature change Test chamber made of stainless steel Robust industrial design Connections for cooling water supply and cooling water return available Connection type according to documents: CEE 63A Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram, piping diagram, and installation plan available Spare parts list and quick guide available For your security as a buyer: The following points can be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Optical condition see pictures Scope of delivery: Ijdoy H Hk Aopfx Am Djih CTS Temperature Shock Test Chamber TSS-70/350-A Documentation as available Note: The sale is of a used industrial device. An inspection by arrangement is possible and recommended. Loading and transport can be arranged by agreement. (Changes, prior sale, and errors in the technical data are subject to change!) We will gladly answer any further questions by telephone or message.

Condition: used, CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The device is used for performing temperature shock tests Iiedpfx Amjy Hkgbe Dsh and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component testing Temperature shock and cycle temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic carriage for shock tests Technical design: Hot and cold chamber separated Carriage system for rapid temperature change Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Other data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: see pictures (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Iodpoy Hkd Hefx Am Deih On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, CTS Type: CTS CW+40/7/7 Walk-in climate chamber CTS walk-in climate chamber, 7 m³ Temperature and humidity testing, 40–90°C Description: For sale is a CTS CW+40/7/7 walk-in climate and temperature test chamber in an industrial design. The system is used to simulate defined temperature and climate conditions for testing materials, components, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and constant or programmed test cycles can be run. Due to the high air circulation, uniform climate distribution is achieved throughout the test chamber. The walk-in design allows testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Type: CW+40/7/7 Serial number: 113011 Year of manufacture: Design: Walk-in climate test chamber Test volume: 2 × 7 m³ Electrical data: Power connection: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climate data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % relative humidity Dew point range: +30 °C to +87 °C Protection class: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm External dimensions of the complete system: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (total) Isdsylmamopfx Am Dsih Further technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating element Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, CTS Climate testing chamber / Shaker chamber CTS TV-70/530 Climate testing chamber Climate testing chamber for combined temperature and vibration testing A used climate testing chamber from the manufacturer CTS Clima Temperatur Systeme GmbH is for sale. The system was developed for combined climate and vibration tests and is suitable for environmental simulation, material testing, electronics testing, quality assurance, as well as development and endurance tests. Shaker/vibration exciter is not included in the offer! Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TV-70/530 Equipment type: Climate testing chamber / Shaker chamber Test chamber volume: approx. 530 liters Test chamber dimensions: approx. 850 x 730 x 860 mm (W x D x H) External dimensions: approx. 1450 x 2250 x 2000 mm (W x D x H) Weight: approx. 1,200 kg Temperature range: -70 °C to +180 °C Heating rate: approx. 5 K/min Cooling rate: approx. 5 K/min Refrigerant: R404A / R23 Rated power: 16 kW Rated current: 29.1 A Equipment Shaker chamber for combined tests Test chamber prepared for vibration applications Cascade refrigeration system Temperature testing Accessories as shown in the pictures Application areas Temperature testing Combined climate and vibration testing Environmental simulation Electronics testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x CTS TV-70/530 Climate testing chamber Scope of supply as shown in the pictures Shaker/vibration exciter is not included in the offer. Items, machines or other accessories shown in the pictures that are not explicitly described are not included in the scope of supply. Iodezd Uq Aopfx Am Doih (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, CTS Type: C-70/600 CTS C-70/600 climate testing chamber air-cooled version with observation window, test specimen protection, and documentation For sale is a high-quality CTS climate testing chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / demineralized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface according to documentation Digital outputs for test specimen control Test chamber dimensions according to documentation: Iodezmq Tlspfx Am Doih approx. 850 x 850 x 830 mm External dimensions according to documentation: approx. 1900 x 1115 x 1850 mm Weight according to documentation: approx. 600 kg Scope of supply: CTS climate testing chamber C-70/600 including existing documentation / operating instructions Scope of supply as shown in the pictures For your safety as a buyer: The unit can be inspected by arrangement. Loading with a forklift can be arranged. For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber for performing temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climatic test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The efficient air circulation with a correspondingly high air exchange rate guarantees good heat transfer to the test specimen. The air handling unit is located on the rear of the interior chamber. The components are located in a separate frame behind the device and are easily accessible. The control system is housed in a separate control cabinet. The operating panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air using a fan.   Technical Performance Data: Isdpfozizmnsx Am Doih   Temperature Tests: Temperature range: -60 °C to +100 °C Temperature deviation: ±0.5 to 1 K over time Temperature change rate: linear, depending on the test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climatic Tests:   Temperature range: +10 °C to +90 °C Humidity range: 10 % to 95 % relative humidity in the dew point range: +5 °C to +89 °C Temperature deviation: ± 0.5 K over time Humidity deviation: ±1 to ±3 % RH over time   The technical data refers to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class: IP 54   Technical Design:   Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by appointment (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See image)   (Changes and errors in the technical data and specifications are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests:   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Iijdszizmbspfx Am Djh Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, CTS Ijdpfsziyw Esx Am Deih Type: CS-70/350 Water-cooled Test chamber volume: 350 liters Test chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C / +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH Max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: used, CTS Type: C-40/350 Air-cooled climate testing chamber For sale is a professional CTS climate testing chamber, model C-40/350. This unit is designed for demanding environmental simulations in industry and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 3.5 K/min Cooling 4 K/min Heat compensation approx. 3500 W at +20°C approx. 2000 W at -20°C Climate tests: Temperature range +10°C to +90°C Humidity range 10% to 95% relative humidity Dew point range +5°C to 78°C Temperature deviation ≤ 1.0 K over time Humidity deviation ≤ +3.0% RH over time The technical data refers to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may influence the performance data. Technical design: Refrigeration unit air-cooled, low-noise, fully hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load 150 kg / m2 Insert grid: Stainless steel, Surface area 620 x 600 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Control: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Ethernet interface Free switching channels for on-site test specimen control Dimensions: Test volume 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 715 mm Iodezizmzspfx Am Djih External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating data: Electrical connection 400V 3/N, 50 Hz Rated power 7.1 kW Rated current 11.5 A Protection class IP 54 Sound pressure level

Condition: used, CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Testing System CSR-60/810/S | -60 °C to +170 °C 39.6 kW | Test chamber 1200 L Description: For sale is a professional climate and temperature testing system from CTS GmbH, consisting of a CSR-60/810/S type conditioning unit and an external test chamber (1200 liters). The system is ideally suited for industrial, development, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations over an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, consisting of: Conditioning unit (CSR-60/810/S) External test chamber (Test chamber 1200 L) The system is designed to supply external test rooms or test chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, lifetime testing). Technical data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of construction: Temperature & Climate Temperature range: -60 °C to +170 °C Humidity range: 10 % to 80 % RH Dew point range: +5 °C to +74 °C Iiodpfxszimgao Am Djh Electrical data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse: 80 A slow-blow Connection type: Fixed connection Refrigeration system Refrigerant: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: CS-70/900 CTS climate testing chamber with Feuchet water cooling (converted to R-452a) Temperature range: -70 °C to +180 °C Humidity range: 10–98 % RH Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, rated current: 35.7 A Climate testing chamber weight: 900 kg Control cabinet weight: 150 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Isdpfx Aoziiztem Deih Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, hermetically sealed, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, left-hand door stop, one-hand operation, lockable. Insert shelf: stainless steel, support area 970 x 980 + 500 mm load per shelf max. 35 kg total load with max. shelf load 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Plain text error messages RS 232 interface free switching channels for on-site control of the test item Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation and without additional devices. Dimensions: Test volume: 2000 liters Test chamber dimensions: height 900, width 975, depth 2200 mm External dimensions: height 1950, width 1290, depth 3145 mm Isdpfezg Twaox Am Doih Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, non-pressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, CTS Temperature Shock Chamber / Temperature Test Chamber CTS TSS-70/130 Temperature Shock Chamber Water-cooled temperature shock chamber, approx. 130 liters For sale is a used temperature shock chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The test chamber is suitable for temperature shock tests, cyclic temperature tests, material testing, quality assurance as well as development and stress tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Device type: Temperature shock chamber / Temperature test chamber Test volume: approx. 130 liters External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H) Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight: approx. 950 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -80 °C to +100 °C Isdpfx Aszf Ibkom Deih Temperature change rate: max. 100 K/min on average Changeover time: < 10 seconds Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min from room temperature to +180 °C Cooling rate: approx. 4 K/min from room temperature to -60 °C Temperature deviation (time): ±1 K Temperature deviation (spatial): ±2 K Power connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated current: 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant, precooling stage: R404A Refrigerant quantity, precooling stage: 4.0 kg Refrigerant, cooling stage: R23 Refrigerant quantity, cooling stage: 0.6 kg / 10 bar Operating pressure PS: 25 bar Water-cooled version Cooling water connection required Compressed air connection required Operation only possible with cooling water and compressed air Cooling water inlet: 3–6 bar Equipment CTS control panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Mobile frame with screw drive Test chamber / mobile frame made of stainless steel Insert tray made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Documentation / operating manual Accessories according to images Application areas Temperature shock testing Cyclic temperature testing Material testing Electronics testing Component testing Aging tests Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x CTS TSS-70/130 temperature shock chamber Insert tray / test chamber equipment Available documentation / documents Operating manual Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the images that are not explicitly described are not included in the scope of delivery. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, CTS Type: C-70/600 CTS C-70/600 climate testing chamber air-cooled version with observation window, test item protection, and documentation For sale is a high-quality CTS climate testing chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. The unit is in used condition and can be fully inspected according to the images. The current display shows manual operation/stop, temperature actual value 16.59 °C, setpoint 5.00 °C, humidity actual value 39.7 % RH, and water supply actual value 11.0 l. Special feature of this version: Extended high-temperature range up to +210 °C (in many standard versions, only up to +180 °C) Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 9.0 kW Rated current: 14.6 A Protection class: IP 22 Refrigerant: R452A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test item protection / temperature limiter Water connection / deionized water supply Test chamber and condensate drain Pipe connections on the side of the test chamber RS232 interface according to documentation Digital outputs for test item control Test chamber dimensions according to documentation: approx. 850 x 850 x 830 mm External dimensions according to documentation: approx. 1900 x 1115 x 1850 mm Weight according to documentation: approx. 800 kg Scope of supply: CTS climate testing chamber C-70/600 Scope of supply as shown in the images For your safety as a buyer: The unit can be inspected by appointment. Loading with a forklift can be arranged. The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Ijdey I Tdxspfx Am Deih 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have over the phone.