Used Dcm Leopard Lma for sale (1,424)

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. Bwodpfx Anjyx Uy Ao Nen • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: new, IG 280 SD Specifications Motors Grinding Spindle Motor 20HP, 200 - 2330RPM Rotary Table Motor 1HP, 5 - 70RPM Servo Column Motor 2KW Coolant Pump 3/4HP, 45GPM Table Diameter 24" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Custom Table Options 18" diameter T-slot or drilled for customer fixtures Contact a DCM Technical Specialist for other custom table & fixturing options Capacity Max Swing Diameter 27" Bsdpfx Aneubbp So Newn Max Part Height 11" with a segmented wheel 12" with a 2A2T wheel Grinding Wheel Options Segmented Wheel Hub Kits 12" or 15" diameter 2A2T Ring Wheel Hub 12" diameter 6A2 Wheel Hub 8" diameter Cortland Chuck 12" or 15" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM AC motor driven Y-axis Electrical Requirements 230V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 80" wide, 68" deep, 90" high Weight Machine & Swarf System: 5,480LBS. Electrical Box: 960LBS. IG 280 SD Features • 24" variable strength electromagnetic chuck with auto demag cycle • 20HP variable speed grinding spindle motor • Thru-spindle vacuum/pressure feed • Integral air mist collection and coolant flow systems for clean and consistent grinding • Programmable touch screen HMI controls • Manual pulse generator for precise Z-axis positioning • Internal memory for saving grind process recipes to aid in quick changeover • Password protection and operator lock-out features • Automatic routine maintenance reminders • 76" x 64" Footprint

Condition: new, functionality: fully functional, IG 482 SD Specifications Motors Grinding Spindle Motor 50HP, 200 - 1180RPM Rotary Table Motor 3HP, 5 - 70RPM Servo Column Motor 5KW Coolant Pump 3/4HP, 45GPM Table Diameter 48" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Contact a DCM Technical Specialist for custom table & fixturing options Capacity Max Swing Diameter 52" Max Part Height 12" with grinding segments retracted 10-1/2" with a 2A2T wheel Grinding Wheel Options 2A2T Suberabrasive or Conventional Segments 26" diameter Cortland Style Hub & Segment 26" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM Servo drive X-axis for precision positioning Bwsdpjubbqijfx An Nsn Electrical Requirements 460V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 137" wide, 82" deep, 88" high Weight Machine & Swarf System: 14,500lbs. (estimated) Electrical Box: 1,500lbs. (estimated) IG 482 SD FEATURES • 48” variable speed electromagnetic chuck with auto demag cycle • 50HP grinding spindle motor • Integral coolant filtration & mist collection systems • Easy to operate touchscreen controls • Mitsubishi FX5U PLC • 3 Grinding Modes - Conventional, Incremental and Grind to Height • Regrind feature allows re-running previous grind sequence without reprogramming • Continuous grind – the machine can automatically cycle through grind 1, 2 & 3 • Servo-driven precision control of both Z and X-axis with absolute home positioning • The cross slide X-axis moves with manual pulse generator • Backlash compensation on both axes • Password protection & operator lockout features • SECS/GEM Interfaced to work with 3rd party Scada type software • Password protection and operator lock-out features • Automatic routine maintenance reminders • 120" x 82" Footprint

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,710 mm, total length: 1,660 mm, total height: 2,975 mm, maximum load weight: 3,000 kg, tank capacity: 2,380 l, overall weight: 150 kg, year of last overhaul: 2026, Ultrasonic cleaning unit with a capacity of 2,380 litres. This ultrasonic cleaning machine is equipped with a pneumatic lifting platform with a load capacity of up to 1,500 kg. The lift has three main functions, which are: Bedpoypcunofx An Newn 1. To assist with the loading and unloading of parts to be cleaned. 2. Assisting with cleaning in hard-to-reach areas, creating a gentle movement of the fluid that helps remove loosened dirt particles. 3. Preventing the ultrasonic action from concentrating on a single point, thereby avoiding marking on the parts to be cleaned when these are made of soft metals such as aluminium or zamak. Ultrasonic cleaning system with patented technology This ultrasonic machine is designed to cover a wide variety of industrial applications. Some of the main applications include: 1. Parts cleaning: Metal parts or mechanical components requiring the complete removal of residues and oils prior to assembly. 2. Degreasing of parts: Removal of grease and oil in equipment manufacturing and maintenance. 3. Stripping and removal of adhered contaminants: Removal of rust, varnish and other impurities. 4. Cleaning in the mechanical industry: Removal of welding residues and particles from electronic components without damaging them.

Year of construction: 2021, condition: used, functionality: fully functional, Janser Belt Sander LEOPARD — Year of manufacture 2021 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 2,300 plus VAT | EXW Einbeck | Delivery upon request Bsdpfxjy A E S Do An Nown

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine Bwedpefbma Nsfx An Non -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: ready for operation (used), Simens 6RA8025-6GS22-0AA0 SINAMICS DCM DC-Converter SN: Q6H22450101, used, good condition, 100% functional, scope of delivery as per photos Bjdexahzgjpfx An Nswn

Condition: used, Year of construction: 2022, - Brand : Comet - Type: Leopard 25 - Year of construction: 2025 - Weight: 4070 kg. - Hours : 652 hours - Drive: Petrol + 220 volts - Working height: 25.5 meters - Lateral reach: 11.5 meters - Lifting capacity: 200 kg. - Remote control - Adjustable tracks - Rotatable work tray - New safety inspection - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible Bwodpfx Aewhqifsn Nen * Brand: Comet *Type: Leopard 25 * Construction year: 2025 * Weight: 4070 kg. * Hours: 652 hours * Drive: Petrol + 220 volts * Working height: 25.5 meters * Lateral reach: 11.5 meters * Lifting capacity: 200 kg.

Condition: like new (used), machine/vehicle number: DCMS, Year of construction: 2007, Demag manulift chain hoist lifting capacity : 125 kg Lifting height : 2.8m Bsdpeg Stp Hefx An Nown reeving : 1/1 lifting speed : stepless 0.15 - 30m/min version: equipped with suspension eye used in very good condition (fully checked) (new price € 3353,-) multiple DCMS hoists available

Condition: used, Year of construction: 1986, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, disc diameter: 350 mm, A.COSTA LEOPARD /2/75 Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Maximum disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-expel latches Weight: ± 5,500 kg 2 spare sleeves and spacers Bwjdpfx Ajwi I Hkon Nen Infeed table: Infeed table connected to the main machine. Total length: 400 cm Number of rollers: 2 straight, 14 inclined. TOTAL: 16 lower rollers + 2 upper rollers Upper rollers with pneumatic pressure

Condition: ready for operation (used), Year of construction: 2016, Gebr. Wagner Piston Pump Leopard 35-70 - Spraypack Airless -+ Year of manufacture: 2016 Technical data: Transmission ratio: 35:1 Max. air inlet pressure: 7.1 bar Max. working pressure: 250 bar Displacement per double stroke: 70 cm³ Max. stroke rate: 60 DH/min Bwedpjx N E Sqofx An Non Max. delivery rate: 4.2 l/min Air consumption at 6 bar per double stroke: 18.6 nl - immediately available -

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Bsdpfohwd E Nox An Newn Manufacturer: DEMAG Type: Crane chain hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Steel beam: included in the offer Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, cutting height (max.): 200 mm, cutting width (max.): 380 mm, saw blade diameter: 350 mm, total length: 3,000 mm, total width: 2,200 mm, total height: 1,900 mm, overall weight: 5,000 kg, A. COSTA LEOPARD double-shaft wide belt sander, 2x75kW (100hp) Bwsdsy Rzygopfx An Non

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t Bwedpfotv Ia Tex An Nsn dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: L220M0165, turning length: 510 mm, turning diameter: 250 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 550 mm, Maintenance of the machine in 2024 for €10,000 TECHNICAL DETAILS Control: CNC Fanuc I Series Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Bwodpswcnubofx An Nsn Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm Tool carrier Turret: 12-way Driven tools: All 12 stations MACHINE DETAILS Machine weight: 4 t Rated power: 23.68 kVA Part counter: 1,313,733 Control switch-on time: approx. 53,000 h EQUIPMENT - Tailstock - Bar loader LNS Turbo

Condition: refurbished (used), MULTIBLADE A.COSTA LEOPARD 2X55KW Bwodpfowwipijx An Nsn FULL RECONDITIONED

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture Bsdew H R R Hopfx An Nown TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: excellent (used), Year of construction: 2016, Kliper DCM 90, lightly used, fully operational. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Bwedpfeykrxljx An Nsn

Condition: used, A.COSTA LEOPARD multirip saw with double arbor - Max cutting depth: 200 mm - Width of track: 350 mm Bwodpfjvf Dagex An Njn - 2 x 55 KW / 75 HP - Weight: around 5 tons

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm Bjdpfx Ajwrw D Rjn Newn max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 430, workpiece weight (max.): 800 kg, The machine was recently inspected by a technician, and the following minor repairs were carried out: New cable routing, replacement of the display, and replacement of the sensor cable for the tool changer. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 700 mm Travel range Z-axis: 600 mm B-axis: Automatic swivel milling head C-axis: NC rotary table (dimensions: 900 x 630 mm) Tool holder: SK40 Number of tool changer positions: 60 Maximum workpiece weight: 800 kg Bwjdpfx Anjy Szq Uo Njn MACHINE DETAILS Control model: Heidenhain 430 EQUIPMENT Chip conveyor Internal cooling system (40 bar operating pressure) Handwheel Heidenhain TS 642 probe

Condition: ready for operation (used), Year of construction: 2001, operating hours: 44,134 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: HEIDENHAIN TNC426/430, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,150 mm Travel range, Y-axis: 710 mm Travel range, Z-axis: 710 mm Spindle speed, max.: 12,000 rpm Table dimensions: 1,500 x 800 mm Table load capacity: 1,100 kg Bwjdpfxjy Uk Hws An Nsn C-axis: 0 - 360° Tool interface: SK40 Number of tool magazine positions: 32 MACHINE DETAILS Operating hours: 44,143 h Control system: HEIDENHAIN TNC426/430 Total connected load: 62 kVA Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,800 x 3,000 mm Machine weight: 9,700 kg EQUIPMENT Coolant system NC rotary table mounted on the machine table Chip conveyor Electric handwheel Manuals / Documentation

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Bwodpfezauxgsx An Nen Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Car jack, jack stand, lifting jack, bottle jack, mechanical jack, axle jack -Manufacturer: Holmatro, Mechanical jack 50 ton -Type: JJ-5013 -Stroke: 125 mm -Shaft: Ø 87 mm -Number: 2x lifting jack available -Price: per piece Bsdji Hmnzepfx An Njwn -Dimensions: 280/220/H295 mm -Weight: 30 kg/piece

Condition: used, 6 knives emptier DC 6 motor Bwsdpfx Ajy Ur Dkjn Non 130 A dimensions (l x w x h) : ± 2.000 x 1.900 x 2.400 mm