Used Dieffenbacher Po 1000 A for sale (74,518)

Condition: used, Year of construction: 1979, Press force: 1000 t Stroke: 350 mm Frame width: 3030 mm Side frame opening: 1450 x 1400 mm Shut height (stroke up): 1400 mm Table area: 3000 x 2000 mm Table height above floor: 430 mm Gkedpfxezyl Ans Aayjb Ram area: 3000 x 2000 mm Downstroke speed: 300 mm/s Upstroke speed: 340 mm/s Note: The machine is partially disassembled and currently in storage.

Year of construction: 1978, condition: used, pressure 2000 /1000* t distance between columns 2650 mm stroke 500 mm column travel -side 500 x 1000 mm diameter of piston 710 mm number of pistons 2 Gedpfx Aaod Ih Nceyekb distance between table / ram 1000 mm operating pressure 130 / 230 bar dayligth 800 mm table length 2500 mm table width 1600 mm table height 250 mm draw back pressure 500 kN number of T-slots 8 turning speeds 1500 U/min rapid speed 120 - 140 mm/min closing speed max. 120 - 140 mm/sec. return of plunger by small single cylinders 100 - 110 mm/sec hydraulical ram locking cutting sound absorber 300 t die cushion capacity 200 t die cushion stroke 250 mm speed of die cushion 100 mm/sec frequency 50 Hz voltage 380 V quantity of oil 2000 l total power requirement 93 kW weight of the machine ca. 100 t dimensions of the machine ca. 5000 x 2500 x 7200 mm transport measurements ca. 6500 x 3750 x 2190 mm 1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. Gkodsh Rit Eepfx Aayob It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press Gsdev E Nlzjpfx Aayekb A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, total width: 240 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, Weinig Unimat 1000 with grooved table Working width: 240 mm, working height: 160 mm, Godpjzbz Ukefx Aayjkb 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 RPM 2-Right (7.5 kW) 7000 RPM 3-Left (7.5 kW) 7000 RPM 4-Top (7.5 kW) 7000 RPM 5-Bottom (5.5 kW) 7000 RPM Feed rate: 4 kW / 6-36 m/min, one driven roller in the table at the outlet.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, pressing force: 1,250 t, stroke length: 630 mm, table width: 1,270 mm, table length: 1,250 mm, overall weight: 70,000 kg, working height: 900 mm, Equipment: safety light barrier, Dieffenbacher P0-F 1250A press A press in very good technical condition, available for sale from a stamping shop that is being closed down in Poland. Gkjdov E Rihepfx Aaysb Modernized in 2016. Features a new Simatic S7 control system and a new electrical cabinet. Optical barriers have also been installed.

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Gkodpfx Aaewpunbeyeb Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Condition: used, Year of construction: 1963, machine/vehicle number: 023-0281, Item No. 21275 Manual Swing Bending Machine Technical data: - max. working width 1030 mm - max. material thickness 2 mm - bending angle approx. 0 - 135° - lockable with end stop - upper beam is operated with a lateral hand crank Gedpfx Aozy Rg Seayokb - max. stroke of upper beam 120 mm - max. adjustment of bending beam 45 mm - bending process is supported by an eccentric weight - space requirement approx. W 1750 x H 1120 x D 450 mm - weight approx. 620 kg

Condition: good (used), Year of construction: 2006, machine/vehicle number: 108111, functionality: fully functional, working width: 240 mm, planing height: 160 mm, working height: 180 mm, Four-sided planer after service inspection, machine weight 3900 kg Gkedpfx Asvrq U Deaysb

Condition: used, Year of construction: 2007, Product Information "Annealing Furnace ThermConzept" Type/Model: WW 1000/06/A Condition: Used Year of Manufacture: 2007 Technical Data Maximum Temperature: 650 °C Internal Dimensions (W x D x H): 1000 mm x 1000 mm x 1000 mm External Dimensions (W x D x H): 2200 mm x 1800 mm x 3200 mm Volume: 1000 l Power: 47.0 kW Voltage: 400 3/N V Weight: 1900 kg Gkedpfxszpynqj Aayjb Inquiry Item: Transportation costs will be provided in a separate, customized offer.

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Gjdpfszww Siox Aayekb Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T

Condition: good (used), machine/vehicle number: 115 240, center height: 250 mm, grinding length: 1,000 mm, grinding diameter: 500 mm, a very well-maintained used external cylindrical grinding machine with internal grinding capability, SCHAUDT, Type: A 510 N 1000. Gksdpfjzz Tkcox Aayeb Center height: 250 mm, grinding diameter: 500 mm, grinding length: 1000 mm, with multiple grinding wheels.

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. Gkjdpfx Aozuuimeayob The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Condition: used, 180° stainless steel wire belt Gkodpezzk U Eofx Aayjb belt width ± 1.000 mm left hand turn all stainless steel mobile 0,18 kW dimensions : ± 3.750 x 2.100 x 1.300 mm

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 36 m/min, working width: 230 mm, planing height: 160 mm, planing width: 230 mm, working height: 160 mm, total width: 2,400 mm, total height: 1,800 mm, power of feed motor: 5,000 W, jointer table length: 1,200 mm, table length: 1,200 mm, number of spindles: 7, 7-spindle moulder with 6 PowerLock spindles. All spindles are electronically controlled (except for the planer head). CNC PowerCom control. Working width: 20-230 mm, Working height: 8-160 mm, Feed speed: 6-36 m/min, 5 kW, with electronic variable speed drive. 1.2 m infeed table. Automatic lubrication pump (Waxilit). 8 pneumatic pressure shoes and 3 rollers on the table. Gkodpfoy At Efjx Aayjb Configuration: Bottom horizontal spindle 5.5 kW Right vertical spindle 7.5 kW with PowerLock Left vertical spindle 7.5 kW with PowerLock Right vertical spindle 7.5 kW with PowerLock Top horizontal spindle 11 kW with PowerLock Bottom horizontal spindle 11 kW with PowerLock Top horizontal spindle 11 kW with PowerLock Fully reconditioned four-sided moulder.

Condition: excellent (used), functionality: fully functional, Working dimensions: 230x160mm Spindle configuration: 1. Lower 15kW – Powerlock 2. Right 15kW – Powerlock 3. Left 15kW – Powerlock 4. Upper 22kW – Powerlock 5. Lower 15kW – Powerlock 6. Upper 30kW – Powerlock 7. Lower 15kW – Powerlock Gkjdpfx Aajzi Tz Rjyjb Feed drive - 7.5kW Spindle speed 12,000 rpm Pneumatic pressure rollers for the infeed Feed drive on cardan shafts Smooth feed speed adjustment 6/36 m/min Automatic lubrication of the table Table made with MaratonCoating technology Control system: PowerCOM with motor control in Polish Soundproof cabin VibroControl vibration sensor Year of manufacture: 2010 Highnech E1 feeder, 2010 Infeed rollers driven by a 7.5 kW hydraulic pump.

Condition: used, Year of construction: 2001, MACH MIND VMC 1000 - A MACHINING CENTER CNC FANUC SERIES O – MD TABLE SIZE: 1,200 mm x 600 mm MAXIMUM ALLOWED TABLE LOAD: 850 KG TRAVELS: X: 1,020 mm Y: 610 mm Z: 610 mm MAX. DISTANCE TABLE – SPINDLE: 135 – 745 mm SPINDLE TAPER: BT 40 SPINDLE SPEED: 60 – 8,000 RPM TOOL MAGAZINE: 24 POSITIONS CHIP COLLECTION TANK Gkodpfoyuqapox Aayjb WEIGHT: 6,000 KG COMPLETE WITH FULL DOCUMENTATION YEAR: 2001

Year of construction: 2021, condition: used, Dayuan L1000/2-A Carton Erecting Machine (2021) with Dayuan Control, Max Production Speed 180 pcs/min, Raw Material Requirements Carton 200-600 gsm Corrugated Paper; Thickness not greater than 1.5mm. S/No. L1000A059 Please Note: Highest bid subject to vendor approval Location: This lot is located in Birmingham, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Gedpfx Aaszwn D Noyokb

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Gksdpfxoy Nl U Sj Aaysb

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 102848, functionality: fully functional, operating hours: 3,142 h, empty load weight: 5,000 kg, feed rate X-axis: 33 m/min, number of spindles: 7, TECHNICAL DETAILS Number of spindles: 7 Spindle 1 - Spindle type: Bottom - Motor power: 15 kW - Tooling: Yes Spindle 2 - Spindle type: Right - Motor power: 11 kW - Tooling: Yes Spindle 3 - Spindle type: Left - Motor power: 11 kW - Tooling: Yes Spindle 4 - Spindle type: Top - Motor power: 22 kW - Tooling: Yes Spindle 5 - Spindle type: Bottom - Motor power: 15 kW - Tooling: Yes Spindle 6 - Spindle type: Top - Motor power: 30 kW - Tooling: Yes Spindle 7 - Spindle type: Bottom - Motor power: 15 kW Minimum planing width: 20 mm Maximum planing width: 300 mm Godpfxey Nyb Ho Aayekb Minimum planing height: 3 mm Maximum planing height: 160 mm Infeed table length: 1,000 mm Feed roller diameter: 140 mm Extraction nozzle diameter: 160 mm Feed speed: Manual Minimum feed speed: 5 m/min Maximum feed speed: 33 m/min Feed speed regulation: Infinitely variable MACHINE DETAILS Voltage: 400 V Current consumption: 278 A Circuit breaker: 400 A Power: 128 kW Dimensions & weight Dimensions (L x W x H): 5,500 x 2,400 x 2,100 mm Net weight: 5,000 kg Operating hours: 3,142 h EQUIPMENT Driven rollers in the table Powerlock Cutterhead drive: Cardan shaft drive Lubrication system: Automatic

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: Gkjdpfx Ajw Uab Neaysb • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series Oi-MB, total height: 2,200 mm, total width: 2,500 mm, table load: 850 kg, overall weight: 5,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 3,200 mm, number of axes: 3, This 3-axis MIND MACH T. VMC 1000/A was manufactured in 2007. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1200 x 600 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the MIND MACH T. VMC 1000/A vertical machining center we have for sale. Contact us for further details. • Rotary table: No • Table size: 1200 x 600 mm Godoy T R Hbjpfx Aayskb Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2004, functionality: fully functional, PEDDINGHAUS TDK 1000/9 DRILLING MACHINE 9 SPINDLES MAXIMUM PROFILE 1000 X 420mm MEBA 1020 DGP SAWING MACHINE cutting diameter: 510 mm capacity 90 degrees: round: 510 mm Godpfx Aezc I Iyoayskb capacity 90 degrees: flat: 1020 x 510 mm capacity 60 degrees: round: 500 (400) mm capacity 60 degrees: flat: 500 (400) x 510 mm capacity 45 degrees: round: 510 mm capacity 45 degrees: flat: 750 (670) x 510 mm

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Colour: Grey Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 Gkodezvcqzepfx Aayjb - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 22 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, Weinig Powermat 1000 four-sided planer Working width: 230 mm Working height: 160 mm Number of spindles: 8 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW (power lock) Left: 5.5 kW Right: 5.5 kW (power lock) Top: 11 kW (power lock) Bottom: 15 kW Top: 7.5 kW (power lock) Bottom: 7.5 kW All spindles: 8000 rpm Feed speed adjustable via frequency inverter up to 30 m/min Electromotive positioning of working height and width Weinig power com system Godpfxezt I Sfe Aayskb Pneumatic material clamping 2 smooth rollers in the working table Working table length: 1970 mm Drive on cardan shafts