Used Dumoulin Coating Unit for sale (32,966)

Year of construction: 2008, condition: used, Manufacturer : Dumoulin Model: TD 20 Year: 2008 Type : Coating pan Coater type: solid drum for impregnation Rotor diameter: Ø 700 mm Rotor depth: approx. 550 mm Unloading: automatic by reversing the rotation of the cylinder Pgedex R A Tnopfx Aknor Spraying: Axflow pump + Endress Hauser Promag 53 magneto-inductive flowmeter (year 2021) Air handling unit : not available, controllable from electrical cabinet. Reference available in documentation Siemens PLC and control panel

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 9,250 mm, total width: 1,200 mm, total height: 2,200 mm, overall weight: 1,500 kg, input voltage: 415 V, input frequency: 50 Hz, 2021 Complete Coating, Breading and Battering line, suitable for poultry, seafood, red meat, plant-based proteins, and cheese products. This system comprises of the following machinery: Manufacturer - Jinan Hiwell. Date of manufacture - 2021. 2 x DJJ100-II Batter Mixers mounted on mobile frame, and each fitted with a Flat Vane Pump. Mixing vessel capacity – 100 litres (per unit). Pgjdpezvrfbsfx Aknjr 1 x SJJ600-IV Batter Coating machine with recirculating pump. While the products pass through the batter shower on the conveyer, the underside of the products are coated by the batter stored in the tank; the topside is enclosed with batter by the batter weir fall. 1 x SXJ600-IV Breading/Flouring Machine. This works as a continuous, automated system that applies an even, uniform layer of dry flour or breadcrumbs to food products. As products enter the machine, they ride on a wire-mesh conveyor belt that passes over a bed of flour or breadcrumbs, coating the underside of the food. Heavy-duty air blowers and vibrators remove loose, excess flour or crumbs from the coated products before they exit the machine. An integrated screw and circulation system continuously gathers, sifts, and recycles the unused flour or crumbs back into the hopper to maintain high material efficiency. 1 x NJJ600-IV Tempura Battering Machine. This machine automatically applies thick or thin tempura batters to products through an immersive dipping process. As food moves along the line, it travels between an upper and lower mesh belt that completely submerge the product into a batter bath, ensuring 100% coverage. It is built specifically to handle the high viscosity characteristic of traditional tempura batters. You can easily adjust the gap between the upper and lower mesh belts to accommodate products of varying sizes and shapes. Output capacity – up to 800 kg/h (approx.), subject to the product, belt speed, coating pickup, and product spacing. Electrical requirements – all machines are rated to 415 V / 50 hz / 3 phase. Useable wire mesh conveyor belt width – 600mm wide. Total line/system footprint dimensions – 9.25m long x 1.2m wide x 2.2m high.

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun Pedpfx Ajzinzleknogr - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Year of construction: 1989, condition: used, LACO 52 Inline Coating System Pedpfx Ajzrm R Roknjgr Supply voltage: 220V Weight: 84 kg Coat volume: 3.5 liters

Condition: used, A full coating unit, with its equipment, designed for coating products by means of a continuous or discontinuous spraying process. Additional documents : Plan implantation équipements + système cip . pdf 1 Glatt GC 750/500 coating unit – drive motor : 1,1 kW – 380 V – 50 hz – IP 54 – Ex - ventilateur d'entrée d'air : 1000 m3/h - 6860 trs/min - 2’003 Pa - Max 80°C - 1,1 kW - IP 54 – air inlet fan : 1000 m3/h – 6860 rpm – 2’003 Pa – Max 80°C – 1,1 kW – IP 54 – air outlet fan: 1200 m3/h – 2900 rpm – 1’030 Pa – Max 80°C – 7,5 kW – IP 55 – Drum speed: 2 – 18 rpm – Sold with two perforated drums ⌀500mm and ⌀750 mm – Adaptable 2-head spray arm + Peristaltic pump– Spare parts, seals, … - Capacity : 20L : 7 to 15 kg 60L : 30 to 45 kg 1 Dust collector Herding FilterTechnik Extraction air volume: 1200 m3 / h Extraction air volume: 1200 m3 / h 1 Wanson CD-36 steam boiler - Power: 36 kW – Steam output: 48 kg/h – Operating pressure: 5 bar Pgjdpfx Aox R Amneknjr – Temperature : 159°C – Water volume: 10 L 1 Cleaning system (CIP) Used for easy cleaning and maintenance of the machine.

Year of construction: 2000, condition: used, Manufacturer : Dumoulin Model : TD 1500 Year: 2000 Type: coating machine Classification: ATEX motorisation and sensors Operating unit: from 4 to 15 kg of mass to be impregnated. Coater type: solid drum for impregnation Turbine diameter: Ø 600 mm Turbine depth: 400 mm Removable mixing blades Materials: 304 L stainless steel Unloading: automatic by reversing the rotation of the cylinder Driven by 0.37 kW geared motor, electronic variable speed drive from 2 to 25 rpm. T°C recorder Timer Rotor speed indicator Ventilation unit integrated into the frame : 1 x EU 13 air filter (absolute filter) 1 x 0.37 kW electric fan Pgjdjx R A Rgopfx Aknor 1 x ADF electric heater (heating element) 1500 W with temperature regulator (sensor) 1 x stainless steel nozzle and blower in the drum      

Condition: used, 5 x Horiba Analyser Units Pjdpfxszvc U He Aknsgr MEXA-7400 SLE, CVS-7200SLE & MEXA-7500D Analysing Accuracy +/- 1 % Full Scale, Response 2.0 Seconds Analysing: THC,CO,CO2,NOx,CH4. Horiba Analysers With Dilute 3 Phase Bagged Emissions And 2 Direct Raw Sample Lines (Pre & Post Cat)

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: Pgsdpfex Iggyex Akner • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Pgodpfswfhu Hsx Aknjr Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Podozqur Hopfx Aknsgr Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 3,400 mm, total height: 2,210 mm, total width: 1,505 mm, type of input current: three-phase, warranty duration: 24 months, temperature: 250 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, Equipment: emergency stop, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ Pgjdpfx Akewdtfuensr ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ PEF-2.5 ELECTRIC POWDER FIRING OVEN WIDTH (INTERIOR): 1,505 mm HEIGHT: 1,800 mm (from the air duct) LENGTH (INTERIOR): 2,500 mm ➢ The thermoblock unit measures 785 x 1,800 x 2,210 mm. The heating capacity is 30 kW/h. A circulating fan is 1.5 kW/h (1 pc.), and an exhaust fan is 0.54 kW/h. ➢ Double-leaf door with thermal insulation and silicone seal. ➢ Guide rails are manufactured for trolleys in the dimensions indicated on the floor panels. ➢ Specially designed air duct ensures uniform air distribution in the curing oven. ➢ The electrical switchgear is made of Siemens and Schineider. This curing oven does not have a PLC system. PLC is available as an option. ➢ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an audible and light signal is emitted by the buzzer. ➢ Additionally, a product transport cart with cast wheels is located inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200mm (dimensions including fan) ➢ Teflon filters: 4 pcs. ➢ Filter suction fans: 4 kW x 1 pc. (6,000 m3/h – 200 mm SS) ➢ 36 W LED lighting x 1 pc. ➢ Bottom drawer x 1 pc. ➢ Control panel for controlling air intake and pressure blasting ➢ DELTA frequency converter ➢ Heavy-duty rollers under the paint booth. ➢ An additional filter is located at the fan outlet. ♨️ Ramp heating mode (optional) Precisely control temperature progression and dwell times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Year of construction: 2011, condition: used, Used Hauzer Techno Coating HTC-1500/4-SpuUC/2-Spu/1-P coating system for sale, manufactured in 2011. Second-hand industrial coating equipment for manufacturing applications. Industrial system for sale for international buyers seeking used Hauzer coating systems, surface treatment equipment, coating machinery, and manufacturing equipment through an industrial auction. Podpszwfiiefx Aknjgr

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: Podpjwzl Hxjfx Aknogr After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h Psdpfxeyil A Sj Aknogr New condition Dimensions LxWxH: 2650x1800x2230mm

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Podpfx Aksxa Hx Rsnjgr Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Year of construction: 2020, condition: good (used), Gough Engineering Sieving station and filtration unit Pgedpfx Ajzvlk Deknor Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. Pedpjwzmcbjfx Aknogr • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment Pedpoyc H I Sofx Aknogr • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Year of construction: 2019, condition: good (used), Zanotti Uniblock GCU5150B2B9E2L Horizontal condensing unit Pjdpfx Aozvli Hjknjgr 2019, four fan unit, see plate for full spec, 3Ph

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Podpjya Hvqofx Aknsgr Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: new, Year of construction: 2022, functionality: fully functional, Manufacturer: Schneider Electric Model: EF593816 Type: Power Connector Block Configuration: 3-Pole (3P) Psdpfx Asw I Twqsknsgr Mounting Type: Front-connected, fixed installation Series: Ecofit Condition: New Availability: In stock 16 pc Product Overview: The Schneider Electric EF593816 is a 3-pole Ecofit power connector designed for front-connected fixed breakers. This compact and robust unit is ideal for integration into low-voltage power distribution systems, particularly in industrial switchboards and control panels. Features: Compact 3-pole connector block Designed for fixed circuit breaker applications Front terminal access for easy installation Engineered for compatibility with Schneider Electric low-voltage breakers Suitable for panel building and retrofit projects Complies with industrial safety and quality standards

Condition: good (used), Year of construction: 2010, total length: 1,600 mm, total width: 1,900 mm, total height: 3,200 mm, overall weight: 600 kg, For Sale: Pgsdjzv S Nmjpfx Aknjr Dosing unit / flour discharge point from Kaak / Silowacht Brand: Kaak / Silowacht Type: flour discharge point Year of construction: 2010 The height is adjustable, the total height is approximately 3.20 meters. The flour discharge point can be mounted on a pole / column. Diameter of the lower filling point: 99 cm Maximum weight of flour: 100 KG Included: - weighing hopper for flour / meal - load cells - water weighing hopper unit - filter unit - pneumatic valves - level gauges - liquid yeast meter, valve and connection - Siemens S7-1500 (Siemens control system) - piping, if required It is possible to inspect this machine on-site. If you have any questions or comments, please feel free to contact us.

Condition: used, functionality: unexamined, Year of construction: 2017, 2017 ('17') Scania R490 6x2 Highline Tag Axle with Epsilon M10L80110 Crane and 2017 Robinson Timber Drag Trailer Usage: 740,804kms Pgjdpfx Akoyxhgpsnor V5 and number of keys TBC

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 510127C00186, Year of construction: 2012, operating hours: 14,539 h, fuel type: electric, overall weight: 3,650 kg, total height: 1,920 mm, total length: 3,050 mm, total width: 1,290 mm, TECHNICAL DETAILS Tractive force: 25,000 kg Number of wheels: 4 MACHINE DETAILS Drive type: Electric Battery type: PzS 465 Pgsdpfx Ajzuli Rokner Battery year of manufacture: 2014 Battery capacity: 465 Ah Battery voltage: 80 V Battery compartment length: 1,020 mm Battery compartment width: 560 mm Battery compartment height: 790 mm Operating hours: 14,539 h Dimensions & Weight Dimensions (L x W x H): 3,050 x 1,290 x 1,920 mm Unladen weight: 3,650 kg EQUIPMENT Full cab User manual available CE marking

Year of construction: 2012, condition: excellent (used), Used STULZ ALD 1072 GE precision cooling / close control air conditioning units, suitable for data centre and technical room cooling applications. Pgsdpfx Akozklcijnor The units are manufactured by STULZ GmbH Hamburg and are CE marked. They use R410A refrigerant and operate on 400V / 50Hz power supply. Units are available with and without ECU, depending on requirement.Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1072 GE Item No.: B84181 Years available: 2012 and 2014 Refrigerant: R410A Supply voltage: 400V ±10% Frequency: 50Hz ±1% Max. operating pressure: 40 bar Max. refrigerant filling charge: 11.20 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Available quantity: 2012 with ECU: 2 units 2012 without ECU: 3 units 2014 with ECU: 1 unit 2014 without ECU: 1 unit Total available: 7 units