Used Eckold Mz 10 for sale (29,386)

Year of construction: 1979, condition: used, throat: 22/29 mm drive motor: bei 380 V ca. 0,55 kW space needed: 450 x 500 x 560 mm Nwedpfx Ajzif Ssm Tei weight: ca. 6,5 kg pressure power: 30 kN

Condition: good (used), Year of construction: 1993, machine/vehicle number: 399/093, Offer 24464 Technical data: - with ECKOLD pressure joining pliers, type MZ - Working pressure infinitely variable max. up to 500 bar - Joining gun pressure force 25 Kn - Single cycle or continuous cycle - Infinitely variable number of cycles - Hose package power unit - tongs approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW Nwsdouzwc Dspfx Am Toi - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Year of construction: 1993, condition: good (used), Offer 23100 Njdpolnkrmefx Am Tjwi Technical specifications: - Punching capacity, steel: 2 to 4 mm - Punching capacity, stainless steel: 2 to 3 mm - Horizontal reach: 30 mm - Vertical reach: 40 mm - Hydraulic unit, manufacturer NOLD, type No. 40.9-4, year of manufacture 1993 - Operating pressure: 250 bar - Drive: 400 V / 4 kW - Space requirement: W 600 x H 800 x D 900 mm - Weight, approx.: 350 kg

Condition: used, Year of construction: 1990, machine/vehicle number: 456 / 378, Ref. No. 25062 Technical Data: - With ECKOLD clinching pliers, type MZ + punching device - Working pressure continuously adjustable up to max. 500 bar - Pressing force of pliers: 25 kN - Single stroke or continuous operation - Stroke rate infinitely variable Nwodpfow Dc Ufsx Am Tsi - Hose package unit – pliers approx. 4 m - Hydraulic oil capacity: 15 l - Drive: 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Condition: good (used), Year of construction: 2006, ECKOLD - Eckold PFW100T Doming tool for MAX. 4 mm Eckold PFW100T Doming tool for MAX. 4 mm Nodpfx Aozdgclem Tewi Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, MZ Project CS 1000 Optic crosscut saw Cutting width: 1000 mm Cutting height: 100 mm Saw blade diameter: 550 mm Electronic lifting and lowering of the clamping beam Automatic material feed Side discharge of cut material Infeed table length: 320 cm Outfeed table length: 255 cm Nwjdozcw Icjpfx Am Toi Roller width in tables: 650 mm Year of manufacture: 1999 Operating pressure: 6 bar CE marking Machine dimensions: 650 x 190 x 190 cm (H)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DFZ-132-00-000F, We are offering these 10 new ECKOLD mobile clinching pliers, type MZD 25/PH Kraftformer, year of manufacture 2025, including pneumo-hydraulic pressure intensifier PHD-002-00-000C and complete tail insert MZD25/3. For a detailed description, please see the attached invoice copy. The stated price of €5,000 (negotiable) is per unit. If you have any questions or need further information, feel free to send us a message or call us. Nodeyfz T Ijpfx Am Tjwi

Condition: used, Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator, gas pressure regulator, flow meter, flow meter, gas meter, quantometer -Manufacturer: ltron, volume gas meter -Type: MZ 100 DN 100 -Qmax: 650 m3 / h -Qmin: 40 m3 / h -Pmax: 10 bar -Dimension: 220/145 / H300 mm -Weight: 15.7 kg Nwodpjg St Nmjfx Am Tei

Condition: new, Year of construction: 2025, functionality: fully functional, We offer a universal blasting machine with turbines, type - TSMZ 250-20 10/10 Table + hanging blasting equipment Table diameter - 1000 mm Table load - 250 kg Hanging diameter - 800 mm Hanging height - 1000 mm turbines - 2 pcs, diameter 250 mm Turbine power - 3 kW Each turbine is independently controlled Nedpfx Aewfyuljm Tswi Elevator power - 0.75 kW Filtration - manual shaking Filter power 1.5 kW, output - 1400 m3/hour Machine dimensions incl. filter - 3200 mm Machine depth - 1800 mm Total machine power - 9.5 kW CE certificate

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm Nsdpjtqfv Iefx Am Tjwi - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: used, axle configuration: 2 axles, first registration: 11/2024, Year of construction: 2024, Usable material: Concrete Nwsdpezfy Nyefx Am Tei Value-added tax/differential taxation: VAT deductible Please contact Harun Cevik, Jamila Azzi, Henri Omeragic, or Denis Omeragic for further information.

Condition: used, High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.1 kW -Speed: 2870 rpm -Volume output: m³/h -Pressure increase: Pa -Connection inlet: Ø 270 mm (without nozzle) -Connection output: 100 x 140 mm Nedpfxodz Umio Am Tjwi -Number: 1x fan available -Price: per piece -Dimensions: 540/400/H775 mm -Weight: 40.5 kg

Condition: good (used), Geared motor, electric motor, three-phase motor -Speed: 29/117 rpm -Power: 0.06/0.25 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 54 Nwsdpfxob A Ikhs Am Toi -Weight: 20 kg

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel Nwjdpfszc Iv Djx Am Tji – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Njdpfx Amswtq Dtj Tswi Maximum working height: 1700 mm. Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: like new (used), - machine in stock - after a technical review - very good condition - ideal for the production of chairs   TECHNICAL PARAMETERS: - 7.5 kW main engine - two dugouts - pneumatic derrick control - pneumatic digging - wheel diameter 850 mm - 40 mm tape width - maximum length of the element 1300 mm - maximum width of the element 800 mm - maximum height 120 mm - two pneumatic side clamps - two pneumatic working distances - continuous feed regulation - hydraulic feed - 1.85 kW pump motor - receiving conveyor 180 mm x 2000 mm - 0.25 kW belt conveyor - central lubrication   Machine dimensions: - length 400 cm Njdped Dc E Aefx Am Tswi - 230 cm wide - height 250 cm - weight ~ 2000 kg

Condition: used, Year of construction: 1989, total length: 1,600 mm, total width: 1,700 mm, total height: 2,750 mm, Empty weight: 4.000 kg - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 4414 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 8 - Max. stroke [mm]: 100 - Table length [mm]: 800 - Table width [mm]: 560 - Ram width [mm]: 300 - Motor power: 5.5kW - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Njdpfex Dkfpox Am Towi Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1990, Eckold tool ECKOLD - SW4T Eckold beak shaped stretching tool for 2 - 4 mm Nwjdszdgmkjpfx Am Toi MACH-ID 3776 Make: ECKOLD Type: SW4T Year: 1990 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2010, Eckold tool ECKOLD - FWA 602 / 4X Nwjdpfx Aszdgmdsm Tsi Eckold elastic forming tool FWA 2 mm MACH-ID 3783 Make: ECKOLD Type: FWA 602 / 4X Year: 2010 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, Eckold tool ECKOLD - SW4T MACH-ID 3787 Nwedszdglmspfx Am Tsi Make: ECKOLD Type: SW4T Year: 2005 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, Eckold tool ECKOLD - FWA 602S MACH-ID 3789 Make: ECKOLD Nedszdgkvspfx Am Tjwi Type: FWA 602S Year: 2005 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, Eckold tool ECKOLD - LFS 60 S Nedszdgkpjpfx Am Towi MACH-ID 3794 Make: ECKOLD Type: LFS 60 S Year: 2005 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Eckold tool ECKOLD - LFS 60 S MACH-ID 3796 Make: ECKOLD Type: LFS 60 S Year: 2005 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Nodpfxozdgi Eo Am Tjwi

Condition: good (used), Eckold tool Nwjdpszdgifjfx Am Tei ECKOLD - FWA 1306 X Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Eckold tool ECKOLD - FWA 602 Nsdpszdggqsfx Am Towi Eckold elastic forming tool FWA 2 mm MACH-ID 3804 Make: ECKOLD Type: FWA 602 Year: 1990 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!