Used Edelstahl Mixing Trough for sale (2,784)

Condition: good (used), Mixing tub, mixing bowl, mixing trough -Bathtub depth: 470 mm -Contents: approx. 220 l -Corners: rounded -Internal dimensions: 800 x 610 x D 470 mm -External dimensions: 840/860/H640 mm Kdedob N Ulajpfx Aqiot -Weight: 32 kg

Condition: excellent (used), Becomix Stirring & Mixing Tank Kjdpfx Aqsx Dnkieijdt Electric lift lid Scraper and mixer motors 316 stainless steel 3000 lts capacity

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. Kdsdpfszmyvisx Aqiet • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, As Constmach, we manufacture stationary asphalt plants designed to deliver maximum efficiency, durability, and quality for your construction and infrastructure projects. Thanks to our modern production technologies, our plants, with capacities ranging from 60 to 200 tons per hour, enable you to produce high-quality asphalt mixtures. Each component—the drying drum, mixer, burner, and filter systems—is designed for long life and high performance. This ensures minimum energy consumption, maximum mixture homogeneity, and low maintenance costs during production processes. Kdedpexp Ut Ijfx Aqist Key Features: High Capacity: Different models with a production range of 60–200 tons/hour provide the right solution for every project. Flexible Design: Customizable structure according to your project requirements. Quick Installation: Can be put into operation in a short time thanks to the modular system. Advanced Control Systems: PLC-based automation minimizes operator errors and optimizes the production process. Add power to your projects with Constmach stationary asphalt plants. Make a difference in asphalt production with our facilities that offer long-lasting, efficient, and environmentally friendly production advantages. Choose Constmach assurance to achieve quality infrastructure solutions! Why Constmach Stationary Asphalt Plant? Superior Quality: Our stationary asphalt plants offer reliable operation for many years with their high-strength steel structure and durable components. High Efficiency: The production process is faster and more consistent thanks to fully automatic control systems and precise dosing technology. Environmentally Friendly: Bag filter systems with low emission values allow you to produce without harming the environment. Easy Maintenance: Maintenance operations are quick and easy thanks to the modular design. Customer Support: We are with you every step of the way, from pre-sales engineering consulting to after-sales technical support. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products for the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Reportedly unused since refurbished Winkworth model 16Z-63 stainless steel z-blade mixer. Mixing trough measures approximately 400mm x 400mm x 350mm deep. All product contact parts in 316/316L stainless steel. Approximate capacity 27 to 36 litre working capacity (product dependent). (2) 316/316L stainless steel z-blades driven by 4kw, 3/50, 1464/37 rpm geared motor. Unit has stainless steel hinged vacuum rated hood/lid with clamps. External 304/304l stainless steel jacket rated 3.5 bar working pressure at 150 deg.c. Unit includes electrically actuated tilt discharge mechanism. Unit includes ICS Cool Energy Ltd model iC220 chiller. Has control panel for mixer and chiller operation. Kjdoymazajpfx Aqiedt

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Kdjdpfxewplc As Aqiot Manufacturer - N&N Nadratowski. Model - MG-450/160. Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Kjdpfx Ajzhnlzjqisdt Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Kdjdpfx Asymayijqiot Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: used, Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels.  Full hydraulic raise/lower with electrical panels, touchscreen PLC controls, CIP pumps, diaphragm product discharge pumps, both vessels on load cell system. Manuals/drawings included. Technical specification below for each main process vessel.   Vessel 1 Ksdpfx Aeymaz Heqiedt Gross capacity 266L, full scraped wall 2.2kw anchor mixer, contra rotating mixer 1.1kw, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.   Vessel 2 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,350 mm, outer diameter: 1,750 mm, overall weight: 1,250 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell OD: 1,750mm. Overall Height: 3,350mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 1,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19693. Factory Tested: November 2020. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and spray fitting, pressure relief valve connection, nitrogen blanketing connection, Endress & Hauser thermowell pocket, lifting lugs, and earthing boss. Seven units currently available both with and without an agitator fitted. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Ksdszht Smopfx Aqiodt Please contact us for further information or to discuss delivery and installation options.

Year of construction: 2011, condition: ready for operation (used), A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible. Kjdpfx Aswrhwzjqijdt

Year of construction: 2009, condition: ready for operation (used), A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible. Kjdey Nna Dspfx Aqisdt

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Kdodezhn Rqopfx Aqijt Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, Brand: Kemper Maximum flour capacity: 125 kg Maximum dough capacity: 200 kg Bowl volume: 306 L Number of speeds: 2 Number of timers: 1 Stainless steel bowl Stainless steel spiral Central kneading bar Bowl protection grid Electromechanical controls Analog timer Power supply: 380 V Increased motor power: 1.1 kW Frequency: 50 Hz Used Kemper SP125 spiral mixer – 125 kg of flour and 200 kg of dough Kedezzz Szspfx Aqiodt General description The used Kemper SP125 spiral mixer is designed for bakery production that requires kneading large quantities of dough. Its capacity reaches 125 kg of flour, with a maximum load of 200 kg of dough, and a bowl of approximately 306 L. The identified unit has the designation "Type SPL" and "Größe 125" on its manufacturer's plate. It combines a stainless steel bowl and spiral with a two-speed operation. This configuration allows for distinguishing the initial mixing phase from the faster kneading phase, while maintaining a simple organization of the work cycle. Why this model stands out The Kemper SP125 primarily meets the needs of production where kneading capacity and cycle consistency are crucial. Its two speeds are complemented by two timers, allowing the working times to be organized according to the different phases of kneading. The machine also has two motorizations, according to the available data for this unit. The protection grid placed above the bowl limits access to the kneading area during operation. Its design is based on electromechanical controls and a three-phase power supply adapted to a production environment equipped for this type of equipment. Key advantages Maximum capacity of 125 kg of flour, suitable for high-volume production Maximum load of 200 kg of dough Bowl volume of approximately 306 L Two kneading speeds to differentiate work phases Two timers to organize cycle duration Stainless steel bowl and spiral Protection grid for the kneading area Two-motor configuration on this unit

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Kdodszb Dp Rjpfx Aqiet Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Inspection in Wuppertal, appointment available on short notice.

Year of construction: 2022, condition: used, Dough mixing system, spiral mixer Diosna WH 240 E Premium Hygienic Design Available from mid-January 2026 Components: 2x Diosna WH 240 E spiral mixers with bottom discharge 1x Hopper with star roller dosing system for processing residual dough and conveyor system 1x Tilting lifter HK 300 1x Dough trough with transport / dough handling system 1x Control cabinet Incl. safety fencing Technical data: Year of manufacture: 2022 Dough capacity: 1,800 kg/h (≥ TA 154, ≤ TA 180) Maximum capacity in dough per batch: 240 kg Maximum capacity in flour per batch: 150 kg Number of batches: 7.50 batches/h Cycle time / auxiliary time: 8 / 1 min Maximum mixing time per mixer: 11 min Kdjdpfoz A Smijx Aqiet Charging time into mixer: 4 min PLC control with touch panel and 19" display With frequency converter for dough trough and spiral (speeds adjustable) With temperature sensor Machine cladding glass bead blasted and reduced to a minimum Mixer designed for wet cleaning in the low-pressure range (IP65) System description The specified mixing system consists of two HygienicDesign spiral mixers, a dough trough with a transport device, an automatic scrap dough feeding system including weighing, and a tilting device with a discharging function. The ingredients can be added to the mixing bowl via filling nozzles on the mixer lid. The scrap dough is added via corresponding filling hoppers with pneumatic lids. Manual additions can also be added via these hoppers. The discharge of the dough into the dough trough is carried out via the electrically controlled bowl opening. The DIOSNA HygienicDesign spiral mixer is operated and controlled with a PLC control including a touch panel.

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Kdodpfszfh U Djx Aqiet Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: new, functionality: fully functional, power: 125 kW (169.95 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Kedpfx Aqsxp Uy Uoiodt Control Type: Fully Automatic What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Tourell Gardner 1500L mixing vessel Stainless, 1500L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge into a Waukesha lobe pump 4.0Kw, 3Ph Kdjdpfx Ajz Ak Twoqijt

Condition: good (used), Tourell Gardner 700L mixing vessel Kjdpfxoz Ak Uzj Aqiedt Stainless, 700L jacketed mixing vessel, hot water jacket, with top mounted agitator and scrape surface, central bottom discharge, 3Ph

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MPC45.2, Stock No.: 2789 1 used, partially overhauled, and functionally tested compounding line Berstorff / Compex Type MPC 45, throughput up to approx. 150 kg/h, material-dependent. The system consists of: Co-rotating twin-screw extruder with barrier screw, segmented screw and cylinder Temperature control unit for cylinder / processing section (connection and water chiller on the customer side) Compex/Berstorff Type MPC 45, drive 34 kW Screws 2 x Ø 45 mm – 40 L/D with screw speed up to 450 rpm 2x Side feeder extruder ZSB 34 (twin-screw) (e.g. for glass fiber feeding - formulations) 3x Degassing zone including vacuum pump Melt filter / screen changer, hydraulic (for processing ground material) Strand granulation, complete with: strand head / nozzle Strand cooling trough and strand granulator, e.g. A-SG 60 (NEW CONDITION), IPS 60E, Alphatec, Scheer, ... Control system: Siemens HMI screen, new in 2022 OPTIONAL: Gravimetric differential dosing system with control Price on request, depending on the design and number of dosing stations. Alternatively equipped with underwater granulation, stock no. 2758 Kodpfxjz A S S Ss Aqiodt MAAG Rieter Sphero 50, with separate control Start-up / training at your plant by our technician is possible, details on request. Test run / sampling / function test with your material mix can be carried out in the short term, details and date on request. Please send us your material data sheets in advance. Further compounding extruders / lines are available for demonstration at our Wuppertal plant.

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Kjdpjzrg T Eefx Aqijdt Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Inoxmim 500L High shear mixing vessel Ksdez At Iwspfx Aqiedt 2020, Stainless mixing vessel, top mounted agitation with scrape surface, bottom mounted high shear mixer 7.5Kw, jacketed both steam and water, with digital temperature display and a Thermosiphon vessel, mobile, with PDF manuals, 3Ph

Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks Output capacity 750kg p/h Ksdpfxsz Azz Es Aqijdt

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. Kodpfxozvmy Ho Aqijdt NOTES – BUYER TO REMOVE FROM SITE.