Used Eht Tss 4-31 for sale (61,393)

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front Gsdpjxab Tvefx Al Ssbu - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Gbsdpfx Alswrhwuj Ssu

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. Gbodpfx Ajzycpxsl Seu dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm cutting thickness: max. 4 mm Gsdpewzvntjfx Al Ssbu length stop range: 10 - 1.000 mm

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype Gbjdpfx Asx Da D Uel Sju We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: used, Year of construction: 1998, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, oil tank capacity: 300 l, controller model: DNC 900 PS, working width: 4,050 mm, bending force (max.): 175 t, We are offering this used EHT VARIOPRESS 175-40 press brake, year of manufacture 1998. Machine type: VARIOPRESS 175-40 Serial number: 211030 Year of manufacture: 1998 Working length: 4050 mm Pressing force: 1750 kN Oil capacity: 300 l Gedpoyw Rbyjfx Al Sjbu Frequency: 50 Hz Current type: 3~ Operating voltage: 400 V Control voltage: 24 V Rated current: 54 A Main fuse: 63 A Main motor power: 15 kW Wiring diagram no.: 11702 Control type: DNC 900 PS If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Gbsdpfx Asuddh Ael Sju Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Year of construction: 2009, condition: ready for operation (used), A hydraulic CNC press brake Eht. Press force: 230t, working length: 4550mm, distance between side frames: approx. 4050mm, max. stroke: approx. 300mm, max. installation height: approx. 500mm, max. throat depth: approx. 405mm, approach speed: approx. 100mm/s, working speed: approx. 10mm/s, return speed: approx. 100mm/s, control: Cybelec ModEva 10S, operating hours: 41789h. Including various punches and dies. Weight: approx. 23,5t, machine dimensions X/Y/Z: approx. 2400mm/5200mm/3100mm. Documentation available. An on-site inspection is possible. Gjdpjzpyx Ajfx Al Sebu

Condition: good (used), Year of construction: 1995, functionality: fully functional, Press force: 150 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC ModEva Pac Overhang: 350 mm Distance between table and ram: 430 mm Table width: 250 mm Stroke: 250 mm Total power requirement: 18.5 kW Machine weight, approx.: 16500 kg Gedpfx Ajzd S Thel Ssbu Space requirement, approx.: 4400x2100x3200 mm Equipment/accessories: - Control system upgrade at the end of 2018 - Electric back gauge, 1250 mm - 10-stage die shifting - Crowning - Tool holder EHT 26 mm - Axis control: Y1, Y2, X, R - Sheet metal support table - 4 manually adjustable stop fingers - Pneumatic upper tool clamping - Safety light curtain - 3 adjustable support arms - Oil cooler - 2-hand foot switch

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm Gsdpjww Nccsfx Al Sebu table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition (!!) - inspected condition - machine video - ?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" Gjdpfxsxaa A Ne Al Sebu * swiveling control panel, front right * 2D graphic display for visualization and multi-simulation * 2D graphic programming * easy operation - CNC motorized backgauge * travel range 10.0 - 1,600 mm * pneumatic / retractable gauge fingers * adjustment speed max. 250 mm/sec. * rear sheet support table with brushes - motorized lower beam adjustment (S-axis) - electro-hydraulic folding movement of the lower beam - pneumatic upper tool clamping - pneumatic lower tool clamping - 1x mobile dual foot pedal - original operating manual + electrical/hydraulic schematics Special accessories included: - 1x segmented set of goat-foot upper tools, H = 150 mm - 1x segmented set of goat-foot upper tools, H = 200 mm - 1x standard sharp-nosed rail (installed) - 1x segmented set of bending/lower tools (installed) - rear sheet support with brushes

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. The dust collection container with filter fleece is located underneath. The machine is in good, partially overhauled condition. Further technical information can be found in the documentation. Gbodpfsyn E H Rjx Al Sju

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics Gedpjz Rmcvefx Al Ssbu - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: used, Year of construction: 1995, sheet width 6000 mm plate thickness 6 mm distance between columns 610 mm Control Elgo 87 P2 total power requirement 15 kW weight of the machine ca. 22 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Gbedpeyutt Eefx Al Seu More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1982, machine/vehicle number: 10628, sheet width:3000 mm plate thickness:4 mm distance between columns:3300 mm rear stop:700 mm Gbedpfscxxzlox Al Seu strokes per minute:19 - 50 Stk/min engine output:7,5 kW total power requirement:ca.10 kW weight of the machine ca.:ca.5 t dimensions of the machine ca.:3,7 x 1,5 x 1,9 m

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: Gjdpoy D Sy Rofx Al Sobu - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Press force: 225 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC DNC 86 PS Total power consumption: 18.5 kW Machine weight (approx.): 18,000 kg Space requirement (approx.): 5180x2400x3200 mm Equipment: - CNC control system Cybelec Gbsdpfxozd Sqye Al Sou - Pneumatic upper and lower tool clamping - Die shifting - Light curtain on the machine - 2 support arms in front of the machine - Controlled axes y1, y2, x, r, z1, z2 - Compensation - 2-hand foot control - Side protective doors

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: Godpfotqmvzex Al Sebu - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: excellent (used), Servodrive, manufacturer SEW - Eurodrive Serial number 31 C 005-503-4-00 Further details, see image Gjdpefd Enrsfx Al Sjbu in original packaging

Condition: good (used), Year of construction: 1973, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, Hydraulic 4-column press, manufacturer FIBRO, year of manufacture 1973, pressing force 315 t. Gbedpfx Alox Nhako Ssu Dimensions approx. 3.0 m × 1.6 m × 4.5 m. Table size: 2.5 m × 1.5 m. Separate hydraulic unit and control panel. Maximum working area 883 mm (ram fully retracted). Powered, can be inspected on site. All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: used, Year of construction: 1994, functionality: unexamined, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, table width: 700 mm, table length: 1,800 mm, overall weight: 10,500 kg, Anayak VH 1800 bed milling machine with 4th axis Control system: Heidenhain TNC 415 B 4th axis as a rotary table, table diameter approx. 530 mm Tool holder: SK 50 Gsdsypxtaopfx Al Sebu Machine is operational; a test run is possible. However, it is sold without any warranty. Sale by offer/bid. Machine is still connected to power. Overhead crane available for loading.

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, HOMAG Optimat BOF 31/40/K Manufacturer: HOMAG Group (Germany) Type of machine: CNC machining center with a cantilever table Year of manufacture: 2001 Design: Stable gantry design (movement in the X-axis is provided by the gantry) Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm (working area for one large part or shuttle operation) • Y-axis (width): 1,200 mm (tool reach during milling) • Z-axis (stroke): 400 mm (max. workpiece passage including clamps approx. 100 mm) Working table (Version K – Cantilever) • Number of cantilevers: 8 sliding beams (cantilevers). • Clamping elements: Two-circuit vacuum system. Suction cups can be freely positioned on the cantilevers. • Positioning aids: Pneumatically controlled stops (rear and front row) for easy and precise positioning of parts. Gjdpfx Ajzr N E Del Sobu Aggregates and equipment • Main spindle: Power 11 kW, HSK F63 clamping, liquid-cooled. • Tool changer: 12-position disc tool changer, which moves together with the gantry in the X-axis. Control and Software • Control system: HOMAG PC85 (industrial PC based on Windows). • Programming: woodWOP 5.0 / 6.0 (graphical interface for creating macros and drilling patterns). • Vacuum pump: Typically Busch with a capacity of 100 m³/h (standard for cantilever machines).

Condition: used, Year of construction: 2000, functionality: fully functional, HOMAG Optimat BOF 31/40/G Manufacturer: HOMAG Group (Germany) Machine type: CNC machining center (stationary machine) Year of manufacture: 2000 Design: Gantry design for maximum stability Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm • Y-axis (width): 1,200 mm • Z-axis (travel): approx. 400 mm (workpiece passage approx. 60–100 mm depending on clamping) Equipment and units • Main spindle: Liquid-cooled electrospindle (power 11 kW) • Tool clamping: HSK F63 • Tool changer: Disc tool changer with 12 positions, located on the gantry for quick tool changes. Clamping system Gedpfx Ajzr Nursl Sjbu • Table type: Full table • Vacuum pump: 2 pcs - Siemens Elmo water-type 2BL1 with a capacity of up to 60 m³/h Control and Software • Control system: HOMAG PC85 (based on Windows) • Software: woodWOP (one of the most widespread and intuitive systems for CNC machining)

Condition: good (used), Year of construction: 1992, Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears Gbjdpfx Aoywzbdsl Seu -Sheet shear: hydraulic -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

Condition: used, Year of construction: 1978, Hydraulic Shear SAGITA BEYELER 3100 x 4 mm Cutting length: 3100 mm Maxi thickness: 4 mm Electric Back gear gauge travel: 1000 mm Throat depth: 300 mm Gbjdpfoz Nfxgex Al Sou Year of construction: 1978 13 hydraulic sheet-metal clamps Blue electrical cabinet not used because it was used for the rear sheet metal conveyor There is a slight hydraulic leak at the left cylinder Supplied with a new replacement blade + front stop Voltage: 380 V Length: 3700 mm Depth: 2400 mm Height: 1500 mm Weight: approx 5 T