Ref:10410 . 2011 Autobond Mini 76 TH.
1 or 2 sided, sheet fed, thin film, thermal laminator for medium and long run lengths
Equipped with:
By329uhi87
Heidelberg Speedmaster deep pile suction feeder, pallet loading
Feed head processor controlled for accurate under-lap
Quick make-ready
Swiss made temperature control unit up to 140°C (280°F)
Sheeter - Integral bump roller separator
Vibrating jogger & reel deliveries
Lamtex Ti 76 Film Laminating machine
Single sided
Age: 2002
Maximum Sheet Length 250 mm
Maximum Sheet Size: 1020 x 720 mm
Minimum Sheet Weight 90 g/m2
Maximum Sheet Weight 450g/m2
Max. sheet per hour 8000
Maximum Speed 65m/min
Two-Sided Lamination In Single Pass
Underlap Accuracy +/- 2.0mm
Vacuum Feed Table
HTB Tornado automatic Feeder
Jogger
Dimensions:
By83q72u9p
Contents:
Feeder, Compressor Pump, Footboards, Heater and Jogger.
Operators manual
Feeder
Weight 900kg
Size: 2.3 m long x 1.36m...
/ year of construction: 1979 / rebuilt: 1995 / max. paper size: 800 x 1100 mm / thermo foil machine / with polyester knife and jogging table / with roll for rolling of 'small rolls'
Bo3jyihcga
Lamination speed: 0-80 m/min Automatic laminating machine Instant Electromagnetic Heater heat up time shorten to 90 seconds This machine is equipped with a paper pre-stacker, Servo controlled feeder and a photoelectric sensor to ensure that paper is continuously fed into the machine Electromagnetic Heater Equipped with advanced electromagnetic heater. Fast pre-heating. Energy saving. Environmental protection Human-computer interface A user-friendly interface system with a colour touchscreen...
max. size 54 x 95 cm
age 2016
thermo-laminating
one-side lamination
stream feeder with suction head
stacking delivery
material approx. 115 - 350 g/sqm
speed up to 15 m/min (off load)
Pqxip
max. foil size 53 x 72 cm
additional foil-soll carrier
extended feeder and delivery table 95 cm
Delivery time: immediately
Year: 2005
Max. Sheet size 700 x 1050 mm
Min. Sheet size 200 x 250 mm
Automatic feeder with suction head
Automatic sheet separator
Air supply to the compressor
Machinde dimensions: 4m x 1,5m
Pesib
LAMINA 1416 FASLINE EDGE LAMINATOR
Technical details:
Max sheet format: 1400 x 1600 mm // 55" x 63"
Min sheet format: 400 x 400 mm // 16" x 16"
Top Materials range: 150 - 450 g/m2 //
Bottom material range: 0.6 - 10 mm // 0.02" - 0.39"
Mechanical speed: up to 80 m/min // 87.5 yd/min
Bvxdlotyxp
Registeration accuracy: up to 0,2 mm // 0.01"
connection: 400 V, 3 Ph, 50/60Hz
Machine details:
Fasline Edge 1416FL E
Downstacker
Single Pressure Belt- top belt extended 1 m
Anti-Wrap Picker
Doub...
Max. sheet size 76x106 cm
Min. sheet size 21 x 25 cm
Pvfkji
max speed 60 m / min (up to 8.000 sh/h)
materials 100 - 600 gsm
high pile stream feeder with steel plate
thermal laminating unit, with water heated pressure rollers
film slitting
sheet separating unit
high pile delivery stacker with steelplate
Semi-automatic machine for one-sided lamination
Thermal lamination up to 15 m/min.
Automatic sheet overlapping for operator-independent equal results
Separation also of nylon films, pneumatic roller printing
with automatic stop at end of run, incl. compressor
Mvxsfoln
working width 540 mm
paper thickness 120 g/m² ~ 350 g/m²
Speed up to 15 m/min
Warm up time 5 minutes
Connection 230 V / 3 kW
Komfi Amiga 52 laminating machine
The machine is 100% operational, ready to work.
It is an advanced machine with high efficiency, in a compact design, taking up little space.
Year of production 2008.
Technical data:
Max sheet format: 520mm x 740mm
Txpu2ea7
Min sheet format: 200mm x 200mm
Min weight: 115 gsm
Max weight: 600 gsm
Working temperature: 80-145 ° C
Max working speed: 25m / min
Built-in Rietschle compressor
Weight: 600 kg
380V power supply
In addition, air 6 Bar
Pneumatic pressure, sep...
Lamination/coating width: Max 1290 mm
Un-winder: Min roll width 650mm – max roll width 1300mm
Diameter of unwinding reels: Min roll diam. 90mm – max roll diam. 830 mm
Max reel weight: 800 kg
Winder: Max web width 1300 mm
Bszwc72pbf
Diameter of rewinding reels: Max 1000 mm
Max reel weight: 800 kg
Expanding shafts: Diam. 76 mm and 150 mm
Drying: Thermal oil
Corona treater: AFS (one side)
Web guide: FIFE
Materials to be coated:
BOPP 15 µm - 80 µm
PETP 12 µm - 30 µm
LDPE, LLDPE - 60 µm - 200 ...
Condition: good
Year of production: 2011
Parameter
Value
Speed 60 m/min = 5092 B1 sheets/h
Max sheet size 76 × 112 cm
Paper weight
Paper thickness 115-600 g/m²
max. 0.7 mm (with overlap >0)
max. 1.4 mm (with overlap
Ppmjf
Are you interested in a double-sided large format poster laminator?
Great, then you have found it.
The Ledco HD 1270 is the most robust thing you can have. We only sell this machine because we have two of them and only need one.
With this machine you can laminate up to a width of 1270mm to make your documents waterproof and durable. You can laminate DIN A0 crosswise! Realistic is a maximum paper width of 120cm on the short side, the long side can be several meters.
We are one of the leading l...
Bagel Digifav B2 Laminator
The machine is 100% operational, in perfect condition, ready for production.
Very low mileage, only 180,000 sheets!
It is an advanced machine with high efficiency, dedicated to digital printers.
Production Spain.
Technical data:
Max sheet format: 520mm x 720mm
Min sheet format: 220mm x 220mm
Min weight: 130 gsm
Max weight: 350 gsm
Working temperature: 80-145 ° C
Max working speed: 22m / min
Weight: 750 kg
380V power supply
In addition, air 6 Bar
Large diameter chrome ...
Max. web width 1200 mm
Max. speed 300 m/min
Max reel diameter unwinder: 850 mm
Max reel diameter rewinder: 850 mm
Corona treater
Expanding shafts 3“,6“
Voltage 400V,50Hz, 100A
Materials PET,OPP,Nylon,LDPE,ALU,Paper
Dvjk8ij
Semi-automatic laminating machine CTL-SS-550
Brand new, never in production.
To be checked in Warsaw, Poland.
We installed more than 100 units in the last 10 yrs - simple construction, robust, will work for years.
Extremally high pressure and large cylinders - will laminate digital printout with regular BOPP film.
• Thermal lamination
• Simple operation, one operator required
• Sheet separation unit - range 200-999 mm
• Table on output
• Pneumatic pressure
(one button to release pressure,...
Liquid laminator from AquaSeal.
Was used to seal PVC banners with a 1K varnish.
Canals should be flushed.
Including cleaning tub made of stainless steel for cleaning the paint bar.
Vuql7a
Laminator Tauler Printlam 75 B1+ size
The machine is in good condition, ready to work.
It is an advanced high-performance machine that works well in service foiling.
Itijsfl
Technical data:
Max sheet format: 750mm x 1050mm
Min sheet format: 200mm x 250mm
Min weight: 1350 gsm
Max weight: 450 gsm
Working temperature: 80-145 ° C
Max working speed: 30m / min
Weight: 1500 kg
380V power supply
In addition, air 6-8 Bar
Steel, chrome-plated cylinder filled with oil to guarantee a stable temperature.
Pn...
Machine Sagitta has the following performances:
Max. sheet dimensions: 76 x 102 cm
Min. sheet dimensions: 30 x 24 cm
Max. speed of lamination: 50m/min
Paper weight: 115-350 g/m2
Thickness of laminating film: 24-50 µm
Type of laminating film: OPP, PET, Nylon
Time of laminating roll warm up (25÷100 °C) 5 min
Byxjfsxwg7
Sheet overlap accuracy (at constant laminating speed): ±2 mm
Igepa Master Sealer 140 Roll Laminator
Description:
The Igepa Master Sealer 140 laminator is a professional roll laminator with a working width of 1400 mm.
This device allows us to laminate various materials. Electronic control of the lamination process and two modes of operation, manual and automatic, make working on this machine easy and pleasant, and the lamination performed is always of the highest quality.
Brxtfeuiq
Technical specifications:
– maximum lamination width: 1400 mm
– laminatio...
Eduard Schier film laminator
Manufacturer: Eduard Schier
D0pibwho0
Type: Foil laminating machine
Dimensions: WxDxH= 16x80x150 cm
Current: 400V, 16A
Shipment via forwarding agent possible, please contact us.
You can find more articles - new and used - in our shop!
International shipping costs on request!
Here we offer a vacuum glass laminating line with 2 heaters.
Mzslz
Glass laminating plant, with 2 heaters
TOOL-TEMP
Model type TT-138b, S/N 310-1877-1, 310-1877-2
Laminating surface approx. 2,900 x 1,400 mm, with feeding table, stainless steel
Control Panel, surface approx. 2600 x 1,250 mm
Control tower PC, 17 "-LCD monitor ACER"
Model/type AL711, mouse, keyboard
The system consists of the following main components:
Vacuum chamber (Chamber + cover)
Pneum.-cover drive
Transport roller conveyor
Li...
- Rebuild as Thermal in 1995, origin machine 1979
- With flying knife
- With Vibration table
- Machine has also roll to roll capacity for Laminating
Bv8tt2rlvv
- Max.paper size: 800 x 1100 mm
- Only thermal laminating
Full Automatic
Bwjdu0z0rg
Max sheet width 1600mm x 1110mm
min sheet size width 200mm x 350mm
Top sheet 130-450 gm/m2
Bottom sheet from 250gm/m2 thickness 0,6-10mm
Press belt
SIRIUS 107 Landscape
Serial number: OSIS008
Demo unit
Production year: 2015
TECHNICAL SPECIFICATION:
Feeder: single action feeding head
Max. laminating speed: 40 m/min
Max. monthly capacity: no limit – 24/7
Min. sheet size: 360 x 300 mm
Max. sheet size: 1070 x 1100 mm
Max. pile height: 680 mm
Range of paper weight: 115-600 g/m²
Colour-Touchscreen
Airshaft
Pneumatic breake for laminating film
Rotary knife for sheetseperation
07rdyx80
Configuration:
Feedingunit with Laminating machine +...
Laminator machine that works with two laminating rolls, making pouching. Great for making documents water etc resistant.
Bxya73nqkv
Machine has only been used in demo.
Instruction manual attached.
Here we offer a Meier vacuum laminator.
Vacuum laminator Icolam 18/11 with
Bush Type: WV 0500 B 001 KAXX
Dimensions and weights Vacuum laminator
Machine depth approx.1930 mm
Machine width approx.2620 mm
Machine height approx. 2250 mm
Machine weight: approx. 5000 kg
Machine characteristics:
Cycle time: variable
Evacuation time: variable
Heating time from 60 to 140 °C: variable
Residence time: variable
Cooling time from 140 to 60 CC: variable
Product insert temperature: 40°C
Bfblrvpjrf
Number of v...
- Year: 1996
- With flying knife
- Vibration table
- Electronic overlap
- With drive for the feeder (build in 2016)
Yfh9azs
- Max.paper size: 1040 x 1160 mm
- Only thermal laminating
Lamination machine/sealing machine
-Automatic flat pile jetty
-Arc format max. 760 x 1060 mm
-Lamination on both sides
Hanjgnza
-optional Milray Cutter is available
The machine is in production!
Autobond Compact 102 T, 2003
SPECIFICATION
Max sheet: 1020 x 740 mm - Min Sheet : 21 x 30 mm
Sheet Thickness: Max 500 gsm - Min 90 gsm
Max Speed: 60m/min
Bt7lxzng
Bagel Systems DIGIFAV B2
Year 2013
speed: 22 m/m*
3.700 sheets SRA3 / hour* / 1.800 sheets B2 / hour*
Sheets sizes and
weights: Min: 220 x220mm / Max: 520 x 720mm
paper ticness 130 – 350 g/m2
Feeder system: Pneumatic feeder with two air suction units, one
Ytz9z0
transport conveyor, four frontal gates,
600 mm stack height and 200 kg capacity and
+/- 1 m overlap tolerance.
Lamination unit: Thermal oil sealed heating roller. Pressure roller
controlled by independent dual pneumatic pistons
system wi...
Automatic laminator Foliant Gulliver Compressor 520A
The most equipped laminator in Foliant’s offer.
Fully automatic machine, ideal for digital printing.
Very good condition, ready for production.
Description:
– feeding from a high pile (elevator)
– automatic separator
– hydraulic pressure of rollers
– sheet straightening module
– built-in compressor for blowing and suction (Becker)
Feed system: pneumatic belt
Max format 52x74cm
Height of the feeding pile: 35 cm
Max. capacity 1300ark B2 / h
Max...
size: 760x1020mm
MABEG feeder
Vacuum Feed,
Lamination unit with heated chrome cylinder,
Oil heating system,
Sheet separator with rotary side knife
For paper and cardboard
Bflai2ajbc
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.