Used Erwin Stelzer Warburg 8M 63G.d2 for sale (1,009)

Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is model 8M 63G.D2. Data for the agitator: RPM: 225 V: 220 / 380 kW: 1.5 Shaft length: 500mm Impeller diameter: 240mm Connection: DN200 Further information can be found on the nameplate. Nwjdpfx Aoga I T Ioazsl

Condition: good (used), For sale are three DRK66D propeller mixers from Erwin Stelzer Warburg, equipped with an emergency stop switch. Product specifications: 8.5 kW Nedpfxofr Igus Aazowl 380/660 V 20.5/11.9 A 960 rpm Propeller diameter 400 mm Flange diameter 400 mm 0.74 cos φ Operating mode S1 Insulation class E IP44 50 Hz

Condition: good (used), For sale are four propeller mixers, model DRK64D, manufactured by Erwin Stelzer Warburg. Nodpfx Asfr Iiheazewl One propeller blade is slightly bent. Product data: 11 kW 380/660 V 25.0/14.5 A 1450 rpm Shaft length 600 mm Blade diameter 340 mm DN250 0.85 cos IP44 50 Hz

Condition: ready for operation (used), For sale is the propeller agitator DRK8P6/12D from Erwin Stelzer Warburg. Nwedpsfr Ifdsfx Aazsl Product data: 18/4 kW 380V 34.2/10.8 A 980/480 RPM Shaft length 780mm Impeller diameter 420mm 0.92/0.68 cos IP 44 50 Hz Operating mode S1 Insulation class E Nameplate (photo)

Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is the DRX3204D model. Agitator data: Nsdpfx Aajga I Sxezswl RPM: 1435 V: 220 / 380 kW: 2.2 Shaft length: 500mm Impeller diameter: 280mm Connection: DN250 Further information can be found on the nameplate.

Condition: used, For sale are eight propeller mixers from Erwin Stelzer Warburg. These are model DRH 64. The condition ranges from good to heavily used. RPM: 1450 V: 220/380 kW: 7.5 Nwedpfsga Dv Hjx Aazjl Shaft length: 740mm Impeller diameter: 320mm Connection: DN250

Condition: used, For sale is a propeller mixer from Erwin Stelzer Warburg. It is model SM/62E.D2. Mixer specifications: RPM: 985 V: 230 / 400 kW: 0.75 Shaft length: 400 mm Propeller diameter: 220 mm Connection: DN200 Nwsdpfx Aega I Tyjazjl For further information, please refer to the nameplate.

Condition: ready for operation (used), 11x DRK 26 H mixers from Erwin Stelzer Warburg, equipped with emergency stop switches. 8x with propeller, 3x without propeller. Product specifications: 1 kW 220/380 V 5.9/3.4 amps 920 rpm 2.7 hp 0.64 cos φ Insulation class E Shaft length 400 mm Shaft diameter 30 mm Overall length 800 mm Impeller diameter 240 mm Nwsdpfxefr Iane Aazjl Connection: DN125

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: ZEISS Comet®LƎD 8M, workpiece weight (max.): 5,000 kg, workpiece length (max.): 1,000 mm, workpiece height (max.): 1,000 mm, workpiece width (max.): 1,000 mm, ZEISS Comet®LƎD 8M Njdpfx Aozwk Nbsazowl

Condition: used, Year of construction: 1994, machine/vehicle number: 9400207, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 13,000 mm, workpiece width (max.): 280 mm, workpiece height (max.): 160 mm, actuation type: electric, total length: 21,000 mm, Equipment: CE marking, documentation/manual, The AUER Unicapp CNC woodworking line is fully functional for standard woodworking tasks; it can process KVH and BSH timber in full lengths (13m). A roof truss or other wooden structure drawn in a CAD program for carpenters, such as SEMA, can be directly sent to the CNC machine. Demonstration and testing are possible. The maximum working height and width of the processed timber are 26/24 cm. The machine has a crosscut saw, mortiser, drill, dovetail milling cutter, rabbeting and tenoning milling cutter, and an automatic feeder. More information is available by phone. The machine software is still supported. Nwjdpfxjzz Tv Ee Aazsl The total length of the machine is 21m and it requires a main circuit breaker of 3x50A. Technical data: AUER UNIKAPP – woodworking processing line (Abbundanlage / Zimmerei-Bearbeitungszentrum) Manufacturer: Ervin Auer Maschinenbau, Abtenau (Austria) Successor company: AUERTECH GmbH & Co KG (Lindenthal 63, 5441 Abtenau, Austria) Type: UNIKAPP Category: Woodworking processing center (woodworking line) Power: 30 kW Voltage: 380 V Serial number: 9400207 Year of manufacture: 1994 Max. workpiece width: 280 mm Max. workpiece thickness: 160 mm Total number of units: 5 Saw units: 1 Drilling units: 1 Milling units: 2 Mortising units: 1 Workpiece feeding: using clamping jaws (sliding carriage with pneumatic/hydraulic clamping) Compliance with standards: CE marking Total electrical power consumption: 30 kW This is a woodworking line for processing beams/roof trusses – it combines a saw for crosscuts and miters, milling cutters for fitting, mortising joints, a drill, and a mortising unit. The workpiece is moved using clamping jaws along the entire length of the beam with pneumatic clamping. If you have any questions or need further information, please feel free to send us a message or contact us by phone. A roof truss or other wooden structure drawn in a CAD program for carpenters, such as SEMA, can be directly sent to the CNC machine. The machine has guaranteed service support, and an upgrade of the ABB control program corresponds to the latest version. Demonstration and testing are possible. It provides a similar performance to a Hundegger K1. If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: used, functionality: fully functional, Equipment: air conditioning, bathroom, lighting, 8 m Office Container / Shipping Container – with WC, Storage & Full Equipment – Available Immediately! PRICE: €7,500 negotiable, ex Dunkirk, France AT A GLANCE: ✅ Office, WC & storage in one container ✅ Fully equipped: heating, sink, heavy-duty power, awning ✅ Ready for immediate delivery – only 2 units available! DETAILS & HIGHLIGHTS: We offer well-maintained 27FT office containers (8 m length) in excellent condition – perfect as office containers, site containers, or storage containers. The containers come from the French CARGLASS fleet and feature high-quality fittings. All technical components are fully functional and ready to use. The condition is guaranteed and will be documented on the invoice. Overview of equipment: ✅ Separate WC with washbasin ✅ Office area with plenty of natural light ✅ Kitchenette with sink & hot water boiler ✅ Storage room ✅ Heating & air conditioning ✅ Electric awning 3x7 m with remote control ✅ Heavy-duty power connection, electrical installation & exterior lighting ✅ Ramp & fire extinguisher Special features: ✅ Practical layout: office – WC – storage ✅ Original photos – condition as shown ✅ Ideal as a construction site office, container office or mobile service point ✅ Technically sound, ready for immediate use DELIVERY & AVAILABILITY: ✅ Delivery within a maximum of 2 weeks ✅ Delivery costs (without unloading): upon request ✅ Immediate availability: 2 units ex Dunkirk, France Contact us now to inquire & reserve! We will gladly provide additional photos, technical drawings, and details upon request. NAUTEXA GmbH Nsdpfx Aajz E Ib Uozswl

Condition: good (used), For sale is a shaft mixer from Stelzer Rührwerke International GmbH. It is the SM460-DF model. Nedpfofr Icusx Aazswl Product data: 1455 RPM 400V 18.5 kW Shaft length 720mm Impeller diameter 280mm Further data can be found on the nameplate (photo).

Condition: good (used), overall weight: 4,800 kg, Used for steaming pasta and other food products. Excellent condition, available for immediate loading. Nedpfxoxxd Imo Aazjwl

Condition: used, Year of construction: 2014, operating hours: 7,700 h, Equipment: all wheel drive, JCB 550-80 WM Nodjytl Ilepfx Aazswl Year of manufacture: 2014 7,700 hours 4x4 ALL-WHEEL DRIVE Lifting capacity: 5 tons Lifting height: 8 m Engine: 93 kW / 127 hp Weight: 11,250 kg German machine Please visit our website: ---- German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... Roman We will gladly take care of your financing or leasing options. EU sales: net price upon presentation of company documents and tax/VAT number. VAT deposit: €2,000 Our services for you: - Customs registration - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: used, Year of construction: 2012, turning diameter over bed 930 mm turning diameter over slide rest 630 mm turning length 8000 mm speed 800 U/min spindle passage 105 mm 4 Jaw chuck Ø 800 mm Steady rest Ø 40 / 400 mm Steady rest Ø 400 / 600 mm Taper turning attachment Coolant system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Nedjyqtlyepfx Aazewl

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, lifting height: 6,000 mm, fuel type: electric, Year of manufacture: 2026 Nwodpfx Aaszv Slbezol Drive: Track Empty weight: 1.780 kg Working height: 800 cm Dimensions of cargo space: 227 x 96 x 214 cm CE mark: yes Technical condition: very good Visual appearance: very good On stock! = More information = Please contact Bas Sindorf , ) for more information

Condition: used, mileage: 262,130 km, power: 315 kW (428.28 HP), first registration: 09/2015, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 4x2, maximum load weight: 3,350 kg, empty load weight: 14,650 kg, next inspection (TÜV): 10/2025, wheelbase: 4,200 mm, brakes: constant throttle, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Mercedes PowerShift 3, rental car, 1x comfort seat, heated seats, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, cruise control, auxiliary heating, air horn, ABS (anti-lock braking system), traction control (ASR), power take-off, raised exhaust, automatic transmission, differential lock, fog lights, work lights, rotating beacon, storage box, leaf air suspension, roof hatch, radio remote control, green environmental sticker. Wheelbase: 4200 mm. Body: Müller Canalmaster CM F 80 ET suction and flushing truck with approx. 8m³ (6,500l sludge chamber/1,500l water chamber) and radio remote control. Front axle 9t, rear axle with 300 planetary gears 13.4t, electronic braking system with ABS and ASR, disc brakes with partial protection front and rear, condensate monitoring for the compressed air system, front stabilizer, additional stabilizer for rear/trailing axle, aluminum front underrun protection, residual heat recovery, auxiliary hot water heating, construction site filter, PSM, reversing alarm, CompactSpace, comfort locking system, Power drive program, Mercedes PowerShift 3, clutch-dependent NMV MB 1.2, NMV transmission lock, transmission oil cooling, refrigerator, ESP: Wittig Aqualine 1600 water ring vacuum pump 400mbar/1300m³/h Uraca KD 716/G 60-110/MU high-pressure piston pump 170bar at 325l/min Operating hours Vehicle: 11112h Body: 2474h ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Nwjdpfx Aajwc D Dfozol - .

Year of construction: 2007, condition: ready for operation (used), A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible. Nwedpfx Ajzpywxjazsl

Condition: good (used), Year of construction: 2006, operating hours: 1,200 h, Genie GS-2032 scissor lift, articulating boom lift, 2006 / 1200 hours, 8-meter working height. A video can be sent via WhatsApp. We have a continuous stock; see our website. Nwsdjz A Akrspfx Aazel Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without warranties (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Nwedpezhtfmsfx Aazel Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Item location is 75053 Gondelsheim See pictures

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 30019513, CNC machining center Hedelius RS 505 K18 Magnum, Year of manufacture: 2012 with - Heidenhain control system - AME chip conveyor - Machine cooling system - Hedelius KM500 lubricant filtration system Nwjdpfez E A Shex Aazol The machine is available for purchase via online auction (due to insolvency) on our website. You can access the website by clicking on the link in the advertisement. Auction end date: October 7, 2026, starting at 6:00 PM.

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: MIKA400077, Technical data: 1 Zasche / Demag ZHD 500-8/4.5 pillar jib crane, rated load 500 kg Load capacity at full outreach: 500 kg / 0.5 tons Height: approx. 4.9 m, bottom edge of jib: approx. 4.5 m Jib outreach: approx. 8 m, hook height: approx. 4 m Overall weight: approx. 1200 kg Equipped with Demag PK chain hoist 500 kg Connection: 400V 16A, slewing range 360° Crane is dismantled and immediately available Location: 75053 Gondelsheim Njdpexvmn Dsfx Aazjwl Only the crane system shown in the pictures is being sold Very good condition, see pictures Shipping by freight carrier or collection by appointment

Condition: excellent (used), Year of construction: 2013, operating hours: 8,000 h, functionality: fully functional, overall weight: 5,000 kg, load capacity: 200 kg, arm reach: 3,000 mm, controller model: IRC5, input voltage: 400 V, input current: 32 A, type of input current: AC, ABB IRB 6650S 200/3.00 robot on ABB IRBT 6004 8 meter linear track. The robot has only 8000 working hours and it is fully functional. Robot can be seen at our facilities. If any additional options needed for the robot, like camera, we can add it. 644-2 German Nwedpfx Asyk Aizjazol 840-2 Profibus Fieldbus Adapter 608-1 World Zones 611-1 Path Recovery 617-1 FlexPendant Interface 623-1 Multitasking RW Drive module 1 key ABB standard manipulator IRB 6600/6650 Axis 1 standard work range 6650S-200/3.0 No motor fan Drive System 09 4600/66x0/460/660/760 Additional drive ADU-790A in position X3 No drive in position Y3 RW Track Motion Type A Key Drive Module 1 IRBT 6004 Type A Standard carriage In line

Condition: used, mileage: 10,000 km, power: 100 kW (135.96 HP), first registration: 01/2009, empty load weight: 2,390 kg, maximum load weight: 14,610 kg, overall weight: 17,000 kg, axle configuration: 6x4, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, German equipment, previously owned by a municipal authority, condition as shown in the photos, Epoke Certus AST SH 6500, including a demountable frame, up to 17,000 kg load capacity. This is the only salt spreader that can be demounted while loaded, always ready for use, complete control unit included, complete documentation available, tarpaulin with a large opening angle, railings integrated into the tarpaulin system, enclosed drive compartment, unladen weight 2,390 kg, ladder integrated into the spreader mounting, payload 14,610 kg, gross vehicle weight 17,000 kg. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Nwodpezwxt Isfx Aazol Our offer generally does NOT include a new TÜV inspection, a new DGUV certificate, a new SP certificate, or a new UVV certificate. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the opportunity to inspect and examine the goods so that no false impressions arise regarding the condition and suitability for the buyer. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for any errors or incorrect information in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: new, Involute gear cutters for SYNCHROFLEX timing belts: Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T16-25 Involute gear cutters for SYNCHROFLEX timing belts: 3M GT, 56x60x22mm T26-50 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: 5M GT, 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T18-28 Involute gear cutters for SYNCHROFLEX timing belts: 8M GT, 70x70x27mm T29-89 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T12-20 Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T21-45 Nwjdpfjzvrupsx Aazsl Involute gear cutters for SYNCHROFLEX timing belts: T2.5, 56x60x22mm T46-80 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T13-17 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T18-25 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T26-40 Involute gear cutters for SYNCHROFLEX timing belts: T5 56x60x22mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T21-45 Involute gear cutters for SYNCHROFLEX timing belts: T10 70x70x27mm T46-114 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T15-20 Involute gear cutters for SYNCHROFLEX timing belts: T20 80x80x32 T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T10-14 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT5 56x60x22mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T12-15 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T16-20 Involute gear cutters for SYNCHROFLEX timing belts: AT10 70x70x27mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T15-20 Involute gear cutters for SYNCHROFLEX timing belts: AT20 80x80x32mm T21-R Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T11-16 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T17-31 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T32-79 Involute gear cutters for SYNCHROFLEX timing belts: HTD5M 56x60x22mm T80-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T18-R Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD8M 70x70x27mm T90-200 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T41-89 Involute gear cutters for SYNCHROFLEX timing belts: HTD14M 70x70x27mm T90-R Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T28-40 Involute gear cutters for SYNCHROFLEX timing belts: HTD20M 80x80x32mm T41-R Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T10-23 Involute gear cutters for SYNCHROFLEX timing belts: MXL 56x60x22mm T24-R Involute gear cutters for SYNCHROFLEX timing belts: XL 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: L 56x60x22mm T10-R Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T14-19 Involute gear cutters for SYNCHROFLEX timing belts: H 70x70x27mm T20-R Inv