Used Eisen Und Hammerwerk Gmbh for sale (84,134)

Condition: used, Reportedly unused 304 stainless steel vessel manufactured by ROLEC Prozess und Brautechnik GMBH. New 2015. Total volume 160,000 litre, useful capacity 120,000 litre. Max. working over pressure 0,9 bar (15 PSI)-Conical angle: 70 °-Double jacket. Vessel :Material: stainless steel 1.4301 (304) - Tank support: 4 stainless steel feet with floor plates Cooling :Cooling liquid: glycol - Water temperature: -3°C - Cooling section cone: 1 - Cooling surface of the cone: 12 m² - Cooling surface of the side walls: 48 m² Vessel dimensions :Inner Ø : 3900 mm (12' - 9 5/10") - Outer Ø : 4100 mm (13' - 5 4/10") - Shell height : 9000 mm (29' - 6 3/10") - Cone outlet height : 1000 mm (3' - 3 4/10") - Total height : 13600 mm (41' - 0 1/10") plus platform and fittings - Various inlets and outlets Hnjdpfoxm T Irjx Ag Nsu Specifications: Capacity: 31,700.6 gal Diameter: 13.12' Height: 44.62' Type Of Heads: Conical Vertical/Horizontal: Vertical Type of stainless: 304 Legs/Lugs: 4 stainless steel feet with floor plates

Condition: used, Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Hnsdeu Tg Siopfx Ag Nou Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, magazines, brochures, etc.) is not held by the spikes and falls into a paper bunker or onto a discharge conveyor after the chute. The spiked cardboard boxes are knocked off the sorting roller by the knock-off shaft and then fall onto the cardboard removal belt or into a separate bunker. Throughput capacity: Depending on pre-sorting, the nature of the feed material and machine settings, between 10 and 12 tonnes per line, per hour can be processed. Scope of delivery: 2 pieces PaperSpike 2G incl. 2 geared motors 2 pieces accelerator belt incl. gear motor 2 pieces paper discharge belt incl. gear motor (The cardboard discharge belt is not for sale and is therefore not included in the delivery! There are two lines available for sale. Depending on the customer's request, either one unit or both units together are sold. The sales price always applies to one unit. Comments: The plants are expected to be dismantled by the end of October and will then be ready for loading. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: MB 478441206, tank capacity: 750 l, total length: 180 mm, total width: 500 mm, overall weight: 60 kg, pressure (max.): 11 bar, pressure: 11 bar, temperature: -10 °C, Compressed air tank 750 litres for collection in Hildesheim, fully functional, regularly TÜV-inspected. Hedpoxc Er Uofx Ag Njnu

Year of construction: 2008, condition: good (used), functionality: fully functional, Biocircle Compact Parts Washer For active environmental protection: The ultimate parts washer – the unit is in good used condition. The Bio-Circle compact washing table/parts cleaner delivers the cleaning fluid via an electrically operated pump to a 3-way valve. Depending on the position of the 3-way valve, the fluid can be directed either through the hose with a wash brush, a flexible spout (including a work surface tray), or both, onto the work area. Hjdjfhdnbopfx Ag Nsnu Designed for use with Bio Circle L Liquid, the tank in the parts washer uses microorganisms to break down contaminated cleaning fluids (e.g., dissolved oils/grease). According to the Bio-Chem Surface Technology operating manual. All used components, as well as brushes to be cleaned for natural, biological parts cleaning, feature integrated heating, a pump, aeration, and filtration, and have been regularly maintained. A magnet in the drain filter strainer retains steel particles. The unit is fully functional and in good condition. Environmentally responsible cleaning for environmental protection. Dimensions of the parts washer: Parts washer H 1120 x W 900 x D 600 mm, weight 45 kg. - 2 units available; can be purchased individually Price/details upon request. All technical information provided subject to errors/typing mistakes. Sales exclusively to countries within the European Community.

Condition: used, Year of construction: 1986, Additional title: 3 coolable tanks Hsdjxbql Depfx Ag Njnu Capacity: 205 hl Operating pressure: 0,3 bar Width: approx. 2,80 m Height: approx. 4,20 m Position: Vertical Base construction: on feet Features: manhole; cooling jackets; spunging apparatus; sampling valve

Condition: like new (used), Year of construction: 2017, functionality: fully functional, load capacity: 8,000 kg, For sale is a Pfeifer turning table that has seen very little use. The machine is somewhat dirty due to long-term storage but is otherwise in very good condition. Hodpfx Agsxdzune Nonu Gentle – The turning process starts and finishes slowly via frequency converter, ensuring smooth handling and minimizing turnaround time in the middle section through increased speed. Safe – Protection from injury is provided by a solid enclosure or integrated safety edges that automatically stop the turning process in case of a pinch or crush hazard. Acoustic and visual warning signals ensure safety when the turning process begins. Mobile – Thanks to forklift pockets, the turning table can be transported to various locations. A simple 400V power outlet is sufficient to operate the table using the included supply cable. Flexible with various table tops – For coils: table top with a cut-out for easy loading and unloading using a coil hook and prism support. For injection moulding tools: both table tops are without cut-outs. For sensitive loads, the table top or prism is PU-coated. Modular – The INVERTO can be configured as needed thanks to exchangeable and retrofittable table tops. Teach-in function – The turning angle can be individually set and saved. Even more flexibility – 180° rotating unit allows loading and unloading from the same side.

Year of construction: 2005, condition: reconditioned (used), functionality: fully functional, How do you do? We are offering you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper discharge belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, from the manufacturer Lubo Screening & Recycling Systems B.V.. Hnodpouanqajfx Ag Neu The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes from the PaperSpike and pneumatic cylinders were replaced. All bearings and drive chains were replaced and the motors and gearboxes were checked. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: like new (used), Year of construction: 2011, operating hours: 1,525 h, functionality: fully functional, machine/vehicle number: W09SSA220BLSF8002, fuel: diesel, cubic capacity: 6,600 cm³, type of cooling: water, stroke length: 127 mm, Equipment: crane, For sale is a well-used SSA 700 log splitter. It is fully operational and in mint condition. The machine is being sold because our business is being remodeled and reorganized. It will be available starting March/April 2025. The machine includes a Bindenberger windshield washer. Price upon request. Hedpfxevy Uudj Ag Nenu

Year of construction: 2014, condition: good (used), Technical data capacitor Volume flow max.: 300m³/h Condenser mass max. in delivery condition: approx. 430mm x1610 mm high Cylindrical part: approx. Ø 273 mm Weight of the chamber in delivery condition: approx. 80 Kg Content upper part (condenser): approx. 30L Hsdecpwhbjpfx Ag Nenu Content lower part (receiver): approx. 28 L Material elastomers: NBR/FKM/PTFE Temperature condenser max: 1 to 80°C Condenser vacuum max: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!!) Temperature exchanger max: 1 to 80°C Medium exchanger: water Water pressure exchanger max: 10bar Exchanger material: CU-tinned Material condenser: stainless steel Technical questions or other sizes on request.

Condition: new, Year of construction: 2024, Facility managers and property managers know the problem: On the due date, i.e. when the garbage truck empties the garbage cans, all the garbage cans must be at the collection point. If the garbage cans are normally in the underground garage, the caretaker has to janitor has to take all the garbage cans up the ramp of the underground garage. up the ramp. This is time-consuming and exhausting or even impossible impossible. A 240 kg garbage can filled with waste paper can weigh over over 200 kg, a 1100 liter waste container even weighs over a ton. even over a ton. If this is the case, the janitor needs the help of a second person. This is cost-intensive. Weber offers time and health-saving solutions to this problem. problem. Talk to us about our waste garbage can frames for 1100 liter waste containers and our waste garbage can trolleys for 120 and 240 liter garbage cans. By the way, battery-powered towing vehicles are of course also available from us. gentle on health effective 400 kg payload galvanized can be coupled together Professional device - not for public road traffic Adapter: Ball head Trailer hitch Hodpfji Nnruex Ag Njnu

Condition: used, Year of construction: 1997, vertical stainless steel tank with dished bottoms, shell cooling zone, manhole, sampling tap, central outlet. Additional title: pressure tank Volume: 152 hl Operating pressure: 5 bar Hnsdpfx Agoxbqlqs Neu Operating temperature: 20 °C Width: approx. 2600 mm Height: approx. 4000 mm Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: cooling coil (jacket, 5.1 m², 1 bar, 84 l, glycol), manhole, spout DN65 with hand flap valve, vacuum valve DN32, safety valve DN25, bung glass, sample pipe DN10, CIP pipe DN40 with spray head DN25, level indicator by hose, yeast plug, pressure gauges, crane eyelets, ladder bar

Year of construction: 1986, condition: good (used), - for forklift trucks 2-8 t Hnsdpfx Ajfxxyxjg Nou - Own weight 1700 t - Thrust and tractive power 300 t

Condition: used, The trustee will sell Hnodpfx Agswaxw Ij Nju The AMI Förder – und Lagertechnik GmbH manual sorter consists of, among others, – Three packaging lines, each 30 m long, with roller racks arranged along both sides of each line – A system of pneumatic belt and roller feeders with scanners – Meler Micron 5 – devices with a piston pump for glue application – Multibox type PCX 1816 cardboard folding/packing machine, year of manufacture 2007, machine manufactured in France – 2 pieces – Logopak labeller model 510+ III TB (SN PE00026247), year of manufacture 2018 – APS 10D 10 bar screw compressor (2 pieces) – screw compressors manufactured in 2017 – APX 24 dryer – working pressure (bar) 13, year of manufacture 2009. – Tank Komnino pressure type KP-1000-11/0.8 – year of manufacture 2014, serial number 1569 – Bizerba – labelling system – Roller conveyor line – line with roller conveyors with 7 storage fields for a maximum of 4 positions per field with an exit to 10 exit ramps The whole thing was dismantled by a professional company and put on pallets - ready for transport.

Condition: good (used), Year of construction: 2011, operating hours: 1,525 h, functionality: fully functional, machine/vehicle number: SP091110K/W09SSA220BLSF8002, fuel: diesel, cubic capacity: 6,600 cm³, stroke length: 127 mm, cutting length (max.): 1,000 mm, cutting width (max.): 700 mm, Equipment: crane, Second splitting cross included (value approx. €15,000) TECHNICAL DETAILS Splitting stroke: up to 1,000 mm Splitting pressure: approx. 80 t Splitting cross: 24-way Hydraulic saw drive: Hultdins Super Cut 100 Saw bar: Oregon Harvester Log diameter: up to 700 mm Log length measurement: available Double cut: available Drive and control system Control system: Siemens PLC Diesel engine: available Displacement: 6,600 cm³ Conveyor and material handling Chain conveyor: approx. 5,000 mm Sorting star conveyor: hydraulically adjustable Chip blower: available Feed table (W x L): 4,000 x 6,000 mm Chain transport including separation: Available Crane Crane: EPSILON M 100 L Use: Fully hydraulic timber loading crane Control: Radio control Chassis Hodpfx Agjwi H Ige Nsnu Tandem chassis: 18 t / air braked Control valve: 6-way including joysticks MACHINE DETAILS Operating hours: 1,525 h

Condition: new, Offered is an attachment block broom Kehrfix in different versions from 1.50 m to 4.00 m width. A pick-up must then still be discussed separately if this is desired (e.g. pallet fork pick-up, shovel hook or Euro pick-up). Hsdpfxjh T A Tne Ag Nonu An attachment block broom for forklifts, wheel loaders, tractors, mini-loaders, mini-dumpers and many other vehicles and equipment! With various attachments for quick mounting on a variety of vehicles, the KehrFix is the perfect aid for keeping larger areas clean. The KehrFix push brooms are a professional choice for easy and effective sweeping and cleaning. The rugged KehrFix is designed to get the job done quickly and thoroughly in every conceivable application. KehrFix push brooms are high-quality, durable, maintenance-free and universally applicable sweeping systems.

Year of construction: 1992, condition: used, Additional title: 6 coolable tanks Hnjdpew Tmqzjfx Ag Nou Capacity: 164 hl Operating pressure: 0 bar Width: approx. 2.05 m Height: approx. 6,2 m Position: Vertical Base construction: On feet Features: Manhole, 2 cooling zones, sampling valve, security valve with pressure indicator, vacuum breaker

Year of construction: 1987, condition: good (used), - for forklift trucks 1.5 - 4 t Hnsdpfx Asfxxy Heg Nou - Own weight 1400 t - Thrust and tractive power 300 t

Condition: used, Additional title: in various designs Hnjdpfx Asw Dy E Uog Nju

Condition: used, Year of construction: 1992, Storage cellar consisting of 8 vertical tanks with temperature control. Hsdovcqthepfx Ag Nsnu Additional title: coolable stainless steel tanks Features: 8 storage tanks (6x approx. 165 hl, 2 x approx. 175 hl), temperature control, paneel, blending apparatus

Year of construction: 1988, condition: used, Additional title: stainless steel tanks with temperature control Total capacity (gross): 904 hl Material: stainless steel Hedjvcqg Ijpfx Ag Nonu Features: 3 fermenting tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl) , own temperature control (Nerb)

Condition: used, Year of construction: 1986, Fermentation cellar with 4 coolable stainless steel tanks. Tank 1-3: C. Gresser, 1986, gross volume 204.60 hl. Tanks standing on 4 legs, each with 2 frame cooling zones, dished bottoms and central outlet. Equipment in each case: safety valve, cleaning line, CIP spray head, sampling tap, manhole in the frame and sight glass in the tank dome. Tank 4: C. Gresser, 1986, gross volume 115.69 hl. Tank standing on 4 legs with frame cooling, dished bottom and outlet pipe. Equipment: Cleaning line, CIP spray head, sampling tap, manhole in the frame. Additional title: coolable stainless steel tanks 3 tanks each: 205 hl 1 tank each: 116 hl Material: stainless steel Position: vertical on 4 feet Hnjdpfxsvcq Dts Ag Nsu Features: Cooling jackets, cleaning lines, CIP spray heads, discharge lines, safety valves, sampling taps, manholes, sight glasses

Year of construction: 1991, condition: used, 6 horizontal stainless steel tanks with dished bottoms, side cooling zone, manhole, sampling tap and central outlet. The purchase of a partial quantity is possible. Additional title: stainless steel tanks with temperature control Hnedevcqulspfx Ag Nju Total capacity: 2429 hl Max. pressure 4 Tanks: 0 bar Max. pressure 2 Tanks: 5 bar Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed on 4 square tube feet Features: 4 storage tanks (approx. 445 hl), 2 pressure tanks (approx. 320 hl), shell manhole, 1 shell cooling zone, insulated with steel metal cladding Periphery: own temperature control

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Hnodpfx Aou Thbxsg Nou Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2008, functionality: fully functional, filling opening width: 1,400 mm, total width: 4,950 mm, total height: 4,443 mm, total length: 8,093 mm, type of input current: three-phase, stroke length: 60 mm, For sale is a used but technically well-maintained machine, which was in reliable operation until the end of June 2024. The machine is in full working order and is ideally suited for immediate re-use or as a solid base for custom modifications. Technical Features & Equipment: Hnsdswzkuzopfx Ag Nju Modern belt feed The machine is equipped with a contemporary belt feed system, ensuring efficient and precise material handling. Drive couplings with bell-type sleeves Robust bell-type sleeves in the drive couplings provide reliable power transmission – easy to maintain and built for longevity. Large couplings, final stage version The machine is already fitted with the upgraded large-size couplings according to the latest machinery specification, offering enhanced stability and performance. Standardized compaction units The installed compaction units meet current industry standards, delivering consistent and powerful processing. Kneading rollers – good profile, used condition The kneading rollers are in a used but fully functional condition, with good tread profile remaining. Conveyor belts – used, but in good condition The conveyor belts show typical signs of wear but remain fully functional and well-preserved. Note: The Makrolon viewing windows should be replaced as they display age-related signs of use. The machine is currently dismantled but can be inspected on site. This machine offers an excellent combination of reliability and modern technology, ideal for operations seeking a proven solution with up-to-date equipment features. For further questions or to arrange a viewing appointment, please do not hesitate to contact us.

Condition: new, Year of construction: 2024, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Hnedpeuud Irefx Ag Nou Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!