Used Evaporators for sale (377)

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Bsdpfx Aeyh Na Eel Ajln

Condition: good (used), Year of construction: 2019, Centauro MTE-4J2-24 Industrial cubic air evaporator 2019, used for commercial refrigeration and cold rooms, powered by dual 450mm fans, cooling capacity of around 24Kw, two in stock, 3Ph Bodpfx Aezvllbol Ajln

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, 2015, R134a, s/n H150832701 — chiller heat rejection. Used 6 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Bodjzz Sidepfx Al Aoln Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. Bjdpfx Aloz D Efne Aeln (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: good (used), Year of construction: 2021, Univap TCM/E 5ED Evaporator with electric defrost unit 2021, Evaporator with electric defrost unit, comes with controls and external KD external fridge plant Blsdpfx Aleuliazo Aon

Year of construction: 2005, condition: used, functionality: fully functional, Evaporation station for apple concentrate with an input juice capacity of 24,000 liters Bedpoxn Ugfefx Al Aeln

Condition: used, Evaporation station for apple concentrate with a capacity of 12,000 liters juice inflow. In 2014, it was completely modernized by B&P Przeworsk, which is now Bucher Unipektyn. Bedoxn Uq Depfx Al Aeln

Condition: good (used), Morgana PC42 Evaporator Twin fan, ceiling mounted Bodpfx Aloqqhino Asln

Condition: used, This listing is for a EuroClone Optichrome evaporation chamber, Optichrome® is a controlled evaporation chamber with automatic control of temperature and humidity for optimized chromosome preparations Blodpexzh Ivjfx Al Aon

Condition: used, Control panel: Siemens SIMATIC PANEL, equipment: evaporator units, valves, process connections, fittings, valve, pressure control and measuring section, pressure gauges, pneumatic shut-off valves, solenoid valves, pressure regulators and additional components, an on-site inspection is possible. Bodpez Ibx Esfx Al Aoln

Condition: used, Bardzo mało używana pilotażowa instalacja do destylacji molekularnej/krótkiej ścieżki produkcji UIC GmbH (DE) model KD10. System jest zaprojektowany do delikatnego i ciągłego przetwarzania materiałów wrażliwych termicznie. Krótki czas przejścia i praca w wysokiej próżni sprawiają, że instalacja nadaje się do zastosowań, w których stres termiczny, degradacja produktu i jego czystość mają kluczowe znaczenie. Typowe zastosowania: - półprodukty farmaceutyczne - wysokowartościowe chemikalia - składniki nutraceutyczne - ekstrakty botaniczne - składniki kosmetyczne - olejki o wysokiej wartości, - lipidy aromatyczne i zapachy Powierzchnia grzewcza: 0,1 m² Podawanie produktu w zakresie od 1 do 2 kg/godz. Stan urządzenia: tylko nieliczne próby pilotażowe, brak rutynowego zastosowania produkcyjnego. Obecnie instalacja jest składowana. Bljdpfezunuvsx Al Aon Części kontaktowe i rama nośna ze stali kwasoodpornej. Wymiary transportowe: D 254 cm x S 81 cm x Wys. 211 cm x waga 1500 kg Dokumentacja techniczna w zestawie.

Condition: used, functionality: fully functional, overall weight: 293 kg, volume flow: 369 m³/h, LGL double flux Evaporator for Coldstores Rated capacity at 0C°/-10C°= 50 KW 5 x fans 450 mm diam.,4 pole Tube content: 49L Fin spacing: 7mm Bljdpfoztbypsx Al Aon Coils anticorrosion treated w. blygold

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, Five Star Refrigeration water-cooled chillers with six cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Bledpjzz Rfqsfx Al Aon Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers Six towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Year of manufacture: 2012 Bljdpfxeyvrwtj Al Aon Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h

Condition: excellent (used), Year of construction: 2016, Evaporators SS/AL (Sequential Defrost) / number of coils: 3 Bedpfx Ajx H Sacsl Aeln from M7 freezing tunnel Refrigerant: CO2 Unit name: 3xGCO K/16/16/.../2920/G/V/V/3 Unit serial number: 404429274/32.01317 Volume (V): 284,9 l Year of manufacture: 2016

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Blsdszvdftepfx Al Asn

Condition: like new (used), Year of construction: 2007, functionality: limited functionality, Full stainless spiral. Currently Built up in storage. 410 Belt width 2100 Drum diameter 3620 Overall width Bjdpfx Asurhv Ijl Ajln 5681 Infeed to discharge 135 Tier pitch 16 tiers Requires evaporator & control panel refurbishment

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Blodpfx Aoynkbmsl Aon Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Condition: used, Year of construction: 2017, Used Goedhart LLK.p 14x6-3006-50x50 evaporator for Freon/Glycol. Complete with 3 Ziehl-Abegg .A7P2 fans - 50/60 Hz - 1,0 kW - 1550 RPM - diameter 500 mm and a total airflow of 25.000 m³/h. Bodpferlk Dcsx Al Ajln

Condition: used, Year of construction: 2007, Used Kuba SGL 56-F62 evaporator on Freon with hot gas defrost. Complete with 2 Süd-Electric MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 15.800 m³/h. Bodpfxsrlk Dke Al Aeln

Condition: used, Year of construction: 2007, Used Goedhart ZFB-1125612 evaporator on NH3 with hot gas defrost. Complete with 2 Süd-Electric MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 19.200 m³/h. Bedpfxjrlk Dgo Al Ajln

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: PJV111654, overall weight: 536 kg, total length: 6,500 mm, total height: 700 mm, total width: 1,050 mm, lamellar spacing: 7 mm, cooling capacity: 63.2 kW (85.93 HP), Used Goedhart VNS 66507 G evaporator on Freon with hot gas defrost. Complete with 6 Ziehl-Abegg fans - 50 Hz - 0,83/0,55 kW - 1330/940 RPM - diameter 500 mm and a total air flow of 42.380 m³/h. Bedpfxsv Ua Uxj Al Aoln

Condition: used, Used Helpman LEX 22 evaporator on Freon with electric defrost. Complete with 2 ATB RFT0,25/4-7 fans - 50/60 Hz - 0,25 kW - 1410/1710 RPM - diameter 457 mm and a total airflow of 9.320 m³/h. Bodpferlk Dyex Al Asln

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: compressor, Manufacturer: GEA / Laguilharre Year of construction: ~1985 4 stages – 6 tube bundles MVR + TVR evaporator Use as a pre-concentrator from 6 to 32% DS Use as (high) concentrator 9 to 50% DS Feed rate: 20,000 l/h whey Evaporation performance: 15,000 l/h Bledpfoyvrtujx Al Asn Including pasteurizer with steam injection Electrical power of MVR compressor: 140 kW TVR steam consumption: 850 to 1,000 kg/h Pasteurizer: 300 kg/h

Year of construction: 2007, condition: like new (used), 457mm wide stainless steel belt with overlay Ashworth Omni grid Belt 95mm Product gap 155 Tier pitch Main drive - 4Kw 1600 diameter drum Goedhart Freon evaporator full cascading refrigeration pack included in a container Bljdpfezuzvgox Al Aon More photos and spec upon request