Used Eyeletting Machine For Advertising Banners for sale (68,115)

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Hodpfoz St Hwsx Aqpofn Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, Hsdoz Srv Depfx Aqpofn +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Hsdpfx Aqsx Utd Eopsfn Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Hodpoz R Rbdsfx Aqpofn Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: excellent (used), Year of construction: 2020, operating hours: 829 h, Baader 588 Filleting Machine 2020, low hours, with spares Complete with IS026 Header Baader 61 knife sharpener 6 station trimming Line Infeeds/outfeeds, various conveyors Hfsdpfx Asyq Sbyoqpon Compressor Rare package!

Condition: used, Year of construction: 2015, Recycling system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber hoses, PVC, tarpaulins, banners and other plastic materials in which textile reinforcement occurs. The system cooperates with a granulation group and a separation system. Hourly capacity: 50 - 80 kg/h Hedpfx Aewpkw Ejqpefn Infeed dimensions: 270 x 120 mm + fi 80 mm Blade length: 3x2 + 2x2 Rotor diameter: 250 mm Cutting length: 600 mm Engine power: 22 kW Dimensions: 3200 x 3000 mm Height: 2500 mm Weight: 1000 kg Year of production: 2015 Technical condition: used machine, all engines in working order. No top cap with dimensions: 400x300 mm used for loading the product. Full and original technical documentation available. .

Condition: excellent (used), For sale: a professional, two-spindle eyeletting/riveting machine, Constantin Hang Typ 150 3P, manufactured in Germany in 1983. This machine is designed for the simultaneous installation of two eyelets or rivets, significantly increasing work efficiency. The machine is used in bookbinding facilities, printing companies, and factories producing binders, folders, calendars, tags, and other paper products. It is equipped with two working units, an adjustable table, and precise guides that allow for accurate material positioning. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: Typ 150 3P Hsdpfxsz Sm Urj Aqpjfn Year of manufacture: 1983 Serial number: 35805 Country of manufacture: Germany Type: two-spindle eyeletting/riveting machine Two working heads Adjustable work table Guides and material position adjustment Robust industrial construction Electric drive Condition: used Applications: eyelet installation, riveting, binder production, folder production, calendars, promotional tags, cardboard packaging, bookbinding and printing. The machine is sold in the condition shown in the photos.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Hfjdpfsxxb Rrjx Aqpon Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Hjdpfx Aozrnkroqpefn Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router Hfedpfx Aqez Iz Imjpjn If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: Hfodsx D Tbmepfx Aqpsn X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, HANG 101-50 electric eyelet machine Electric single-head eyelet machine 101-50 PiccoStar for eyelets No. 269 / 270, Ø 5.0 mm. Automatic eyelet feed. Suitable for paper, cardboard, plastics, etc. Ideal for contracts and documents. Perforates and sets eyelets in a single operation (the eyelet punches the hole). Infinitely adjustable back edge stops guarantee precise positioning. Push-button to trigger the eyelet setting process. With self-piercing eyelets, up to 30 sheets of 80 g/m² paper or material thickness up to 3 mm. Hfedpfx Ajzy D A Heqpjn With pre-punched material: up to 50 sheets of 80 g/m² paper or material thickness up to 8 mm. Weight: 36 kg / Voltage 230 volts / Tool / Operating manual.

Condition: excellent (used), A robust German machine designed for riveting, crimping eyelets, snaps, and other fastening elements. Thanks to its stable construction and electric drive, it ensures consistent and precise operation. Hjdpfx Aoz Sm N Tjqpefn Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: 167-12 Serial number: 34,756 Power supply: 220/380 V Motor power: 0.25 kW Motor speed: 1390 rpm Electric drive with foot pedal 220 V electromagnetic brake Adjustment of working settings Stable industrial construction Made in Germany Condition: Used machine, in good visual condition. Condition as shown in the photos. Sold in the exact condition as depicted in the photographs.

Condition: good (used), Year of construction: 2020, functionality: unexamined, type of input current: three-phase, total width: 970 mm, total length: 2,530 mm, total height: 2,190 mm, overall weight: 850 kg, compressed air connection: 12 bar, Designed for bulk products and powders, it features a dosing head for bulk materials. It has a screw-type filling conveyor. It doses into doypack packaging with dimensions of 190 mm x 230 mm. The equipment was purchased but never put into operation; the project was discontinued. Hjdpfx Aqsy U Twrspsfn

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line Hfedezx Rz Hopfx Aqpjn - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: good (used), Hang 101-50 Eyeletting machine The machine is in perfect condition and ready to use. Technical specifications: Hfsdpfozw N U Asx Aqpen 1 eyeletting head (Hang 271 rivet, hole diameter approx. 6mm) Maximum capacity: 20 sheets 230V power supply Front and side margins Operation: foot pedal or hand switch. The machine punches and crimps the eyelet in a single pass. Automatic eyelet feeding.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Hjdoz D Dxgspfx Aqpsfn Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use • High profile precision and repeatability Machine condition: • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Attractive price.

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Hodpfx Aqsyznu Sopjfn Contact our team for details and price.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. Hfjdpfx Aqexghngjpen The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, DALLAN Rollforming machine | Omega profiles 60mm & 80 mm With 11 forming stations, fully equipped and currently set up for Omega 60 mm, the line includes additional tooling for Omega 80 mm profiles. This machine is complete, in excellent condition. DALLAN rollforming line with 11 forming stations: · Maximum sheet width: 300 - 350 mm · Controls: Dual console · Shaft diameter: 60 mm · End unit: Integrated cutting station · Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm · Idle decoiler · Tooling box (approx. 1,000 kg) for producing other profile types · Dimensions: 10,000 x 1,400 x 1,600 mm (L x W x H) · Weight: 10 tons Maximum sheet width: 300 - 350 mm Controls: Dual console Shaft diameter: 60 mm End unit: Integrated cutting station Hsdpfxoxugf Ho Aqpjfn Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm

Condition: excellent (used), Year of construction: 2022, 400mm swing, 220mm max diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4000rpm, Hjdpfx Aqjz Hatfepofn 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Hfedez Eh Nljpfx Aqpon Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: good (used), Hang 102-20 Eyeleting machine with base This device is like new, the latest product from Hang. Made in Germany. Technical specifications: 1 head Hfsdpozlgfnefx Aqpon Eyelet diameter: No. 24-25. Inner diameter: 4mm. Maximum capacity: 20 sheets of 80gsm Front and side margins Manual operation The device feeds the Eyelet in the correct direction, punches holes, and crimps the Eyelet in a single pass. Instructions are included.

Condition: good (used), Horizon ED-40 Standing Delivery Unit Manufactured by Horizon, Japan. Can be connected to any Horizon folding machine, but also works with Heidelberg, Herzog Heymann, MBO, etc. Hodpfxoz R Iqbs Aqpefn The device also operates independently of the folding machine. Infinitely variable delivery speed adjustment. Height adjustment. Package counter with shifter. Format: min 20mm max 110mm

Condition: used, pneumatic Eyeletting machine Falzoni F401.9.S21 pneumatische Ösenmaschine / pneumatic Eyeletting machine Falzoni F401.9.S21 Hfodpfjz H Aw Tex Aqpjn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test