Used building material fabrication for sale (62)

Condition: good (used), Asphalt mixer Capacity: 400 tons/hour Ihedpsx U T T Tofx Addst

Condition: used, functionality: fully functional, Feeding chute with rubber-lined coating Mixing drum with paddles, diameter approx. 1,600 mm, length approx. 4,000 mm large production capacity simple and robust design Iedpfxjxrn Ane Addjht on 2-axle trailer

Condition: new, Self-propelled concrete distributor. Hopper capacity: 2 m³, 3 m³, and 4 m³ (other sizes also available). Various options available, such as closed cabin, reversing camera, fully enclosed covers for the concrete auger, and slide valve. More information available on request. Ijdpfx Adsx Ap Awjdsht

Year of construction: 1993, condition: ready for operation (used), A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible. Ihsdpfjx S Rbvsx Addot

Condition: excellent (used), Year of construction: 2007, Used Omag 1200x1100 block and paving stone production machine from 2007. Equipment includes: cement silo and auger, ACT/Wiggert 1875 L mixer, Eagle granulate coloring machine, Marcotte dosing system, Besser/Omag concrete transport system, Conv System concrete transport system, concrete feed hopper, Systeg block production machine (without face mix). Capacity of 2.8 to 3 cycles per minute. We produced products with heights ranging from 36 to 90 mm. Wet Omag conveyor (front), Omag material (slab) tipper, Omag elevator, Omag finger car, Omag lower conveyor, Omag gap closer, Omag dry stack conveyor, Omag cuber board feeder, Omag board and block conveyor, Omag Cuber, Omag board brush and flipper, Omag rear panel return line, Omag panel return line, Omag power supply panels, Omag hydraulic unit for wet side, Omag hydraulic unit for dry side, Siemens PLC controllers, steam generator. 1220 used plastic production boards, 1200x1100 mm (production area 1040x1040 mm). Ihodpfx Ajx Ty Saoddst

Condition: used, functionality: fully functional, Quadruple dosing unit, mobile on steel skids, used – row-type batcher. Each hopper approx. 20 t, feeding width for wheel loader approx. 3.65 m, continuous throughput approx. 400 t/h. Complete with hopper extensions, main discharge belt, separate incline belt 18 m, motorized swiveling chassis, material humidification, material shortage sensors. For production of mineral mixtures, base layers, etc. Option: Additional price for complete new control system. Ihodox Rvc Aspfx Addst

Year of construction: 2016, operating hours: 6,100 h, condition: ready for operation (used), functionality: fully functional, Terex Pegson Premiertrak 400 2016 year 6100 hours Inlet 1100x700 mmTerex Pegson Metrotrak 900x600 2016 year 6100 hours Inlet 1100x700 mm Engine Scania DC09 CSS range from 0-65 to 0-150 mm Ihjdpfxjxvcdue Addot Capacity 150-250 tons per hour depend on material Weight 45 tons Fitted with side conveyor Fitted with overband magnet Fitted with belt scale Machine in great working condition, ready for work like NEW

Condition: used, functionality: fully functional, 2-shaft compulsory mixer Working dimensions approx. 900 x 3,500 mm Electric drive with 132 kW motor and gearbox on a semi-mobile steel structure with new control panel Isdetrmvfjpfx Addsht

Condition: ready for operation (used), Libherr Semi Mobile Mixing Plant 120 Qm Std. The plant description serves only for the general identification of the of the system and does not constitute a warranty in the sense of sales law. The information does not claim to be complete. The information information/descriptions and pictures are non-binding and do not serve as guaranteed properties. The seller assumes no liability/warranty for typing and data transmission errors. Equipment may have to be checked separately. But if you come by, you are welcome to view the plant have a look. Ihjdpfx Asu A Dt Soddot I look forward to any reply.

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Iodew R Uziepfx Addeht

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 500 h, Bunker dosing belt by R&T Recycling Technik Year of manufacture: 2016 Capacity: 2.5 m³ Drive: 1.5 kW Frequency-controlled feed belt Ihedpfx Aexcuvisddjt This system was integrated into a small pilot plant for approximately 3 months in 2016. The unit is in excellent condition and ready for operation. As shown in photo no. ..., this unit can be transported on a large tandem car trailer.

Year of construction: 2025, condition: new, Dosing system serial doser for the production of mineral mixtures, FSS, STS, KG 1/2 etc. semimobile unit, dosage, dosificación 4 chambers each about 22 m³, hourly output eff. 720 tons, , 900 recipes can be set, direct loading onto Trucks Iedpfx Aegpk E Dsddeht

Year of construction: 2011, operating hours: 3,800 h, condition: ready for operation (used), functionality: fully functional, McCloskey I54 impact crusher on tracks 2011 year Ijdpsx Npv Hsfx Addjht 3800 genuine working hours on CAT C13 engine' 2900 crusher hours(new controller) Engine CAT C13 - 536 HP 53000 kg Inlet[mm]:up to 1200x1350 mm Max size of inlet materiał:800 mm CSS[mm]: 0-20 to 0-150 mm Capacity[t/h]: from 150 to 300 Feed hopper 6,8 m3 Fitted with overband magnet Fitted with prescreener Fitted with side conveyor 3-generator 31,5 kVA 400 V Wear plates 90% Blow bars 90% Machine in great working condition, can go straigt to work

Condition: excellent (used), Offered are 5 used silos in very good condition: 50t, 60t, 80t. Iedpfx Asx Ah Npeddoht

Year of construction: 2015, condition: excellent (used), 3 cement silos 100T with filters, installation in a mobile system Ihsdpfx Adjx I D S Hodst

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW EPS bead storage 300 m3 Iedju U Ad Rjpfx Addeht

Year of construction: 2006, condition: refurbished (used), Multifunction Center Bar Wiser 26 Dual, manufactured by SCHNELL Completely revamped "as new" 1 bar up to: 8/22 mm 2 bars up to: 8/20 mm Isdpfevtx E Hjx Addsht 3 bars up to: 8/12 mm Bar length: 12 m 1 bar up to: 8/22 mm 2 bars up to: 8/20 mm 3 bars up to: 8/12 mm Bar length: 12 m

Year of construction: 2014, condition: like new (used), functionality: fully functional, Molds for machine producing concrete elements Ijdpfx Ademmcfxsdjht - 30x30x5, 40x40x5, wave h=8, behaton h=6, block 20x20x6

Year of construction: 2002, operating hours: 2,950 h, condition: ready for operation (used), functionality: fully functional, Rubblemaster RM60 impact crusher 2002 year 2950 genuine working hours For lift truck Engine Deutz 1012 - 67 kW at 2000 RPM 11500 kg Inlet[mm]:up to 640x550 mm Max size of inlet materiał:500 mm CSS[mm]: 0-20 to 0-60 mm Capacity[t/h]: from 50 to 80 Feed hopper 1 m3 Fitted with overband magnet 3-generator 31,5 kVA 400 V 230 V and 400 V outlets for external drives up to 6 kW Wear plates 90% Blow bars 90% Machine in great working condition, can go straigt to work Iedpfxox Iuq Hs Addsht

Condition: excellent (used), Year of construction: 2017, PERII production pallets, dimensions 1200x1100x50 mm, quantity 4,000 pcs, price given per piece, condition B – good. Isdex Hdpiepfx Addeht

Year of construction: 2016, condition: used, MEP cutting & bending machine, SYNTAX 28 Single bar: ∅10 - ∅28 mm (#3 - #8) Iodpfx Adjxl Avvedeht Double bars: up to ∅20 mm (#6) • Bar presence detector • Multifunction feeding: gripper and feed rollers • Dual shears • Bending pins accordingly to international rules Video disclaimer: This video is the manufacturer's promotional demonstration for the SYNTAX 28 model. It does not show the specific line currently for sale. Single bar: ∅10 - ∅28 mm (#3 - #8) Double bars: Up to ∅20 mm (#6)

Condition: excellent (used), Year of construction: 1993, OMAG TRONIC 140/120, complete line, production pallet size 1450-1100, twin-feed machine, year of manufacture 1993, racking trolley with rotation, repacking including strapping, 7 mould sets, Siemens S5 control system. Ihjdpexmk Uvofx Addot

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Revamping year: 2025 Original manufacturing year: 2005 Wire diameter: - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Ihodpfovtp Rmjx Addet Max Bending speed: 1650° / sec Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Working pressure: 7 bar Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm

Condition: excellent (used), Year of construction: 1993, OMAG TRONIC 140/120 complete line; production pallet size 1450x1100 mm, double-feed machine, year of manufacture 1993, rotating storage trolley, repacking with strapping, 10 moulds, Siemens S7 control. Ihedoxl D Imopfx Addot

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, HESS RH 2000 complete line, production pallet size 1400-1100, double feeder machine, year of manufacture 2000, stacking and destacking elevator, rack trolley, Doppler, centering device, packaging machine, horizontal strapping, pallet turner, 5 armored mold conveyors, noise-reducing panels, Siemens S7 control. Ihodpfx Aexliqgjddot