Used Fabrikat Esterer Lsh 65 for sale (7,764)

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. Crsdpozgr Iqofx Apbsh WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Cedjyhduyopfx Apbjrh Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: excellent (used), Spare parts for Esterer log carriages LSH 65, some in new condition, new and used. Flywheels, stanchions, hydraulic cylinders, chain drives, feed gears, guides, solenoid valves, overhanging parts. Saw frame, top and bottom, saw carriage with insertion brackets. Pulleys. Credpfx Apsi T Egpobeh Spare parts also available for Esterer log carriages SS 71.

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor Cjdpsw Dn S Ajfx Apberh With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: good (used), Hydraulic unit for Esterer LSH saw gate, manufactured in 2006 Type: RP 63 WÜ Cedpfx Apjg R Sm Dsbsrh Feed mechanism for LSH also available Fully functional – in good condition – immediately available Location: Austria, near Ried im Innkreis Please also check out my other listings. I look forward to your inquiry.

Condition: used, Year of construction: 2017, zpracování slabé hmoty - délka výřezů od 1300 - 4500 mm - průměr kmene od 130 - 350 mm - 100 m3 / směnná výroba - celkový příkon 230 kW. ​Vyhledat podrobnosti 137 / 5 000 Výsledky překladu Crsdpfxenqzkps Apbjh Výsledek překladu processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW.

Year of construction: 2017, condition: used, processing weak matter Cedsnwm R Nopfx Apberh - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW

Condition: excellent (used), Cross-country trac/multi-saw receiver Rollers width 1160mm Number of drawing rollers 14 Distance between rollers 550mm Credpfx Ajtrq S Hepbjh Drop chains with takers 4pcs Longest element 820cm Use behind a sawmill or a multi-saw

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Crodpeyg Hcdjfx Apbjh

Condition: good (used), functionality: fully functional, Esterer spreading jaw AVER. Equipped with electrically driven spreading rollers. Also adjustable manually. Electrical adjustment of the spreading jaws, also asymmetrical. Pressure rollers can be hydraulically extended and retracted. Credpoz D Exujfx Apboh Heavy-duty spreading jaw blades and spring flaps.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 6,000 rpm, bar passage: 65 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Tool turret Number of turrets: 3 Tool holder: VDI 25 W-gear Main and counter spindle Main and counter spindle speed: up to 6,000 rpm Bar diameter: 65 mm MACHINE DETAILS Coolant tank: 600 l Coolant pressure: 8 / 18 bar EQUIPMENT Gantry removal device Hainbuch HS Axzug / GS Axfix Chip conveyor Crjdpfx Apjz Ibf Esboh Coolant tank with strainer basket Coolant pump Coolant cooling unit FMB Turbo 10-65, 3-meter bar feeder

Condition: good (used), Year of construction: 2014, functionality: fully functional, DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Crjdpfx Apez Ix Uqobsh Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 – 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Swiveling range / Rotational range T-slots: 600 B: +/- 120 C: 360 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Number of tool positions: 30 Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free neighboring position: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Chip removal time: 8.0 sec Feeds: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed rate: 1 – 40,000 mm/min Total power consumption: 24 kVA Machine weight: approx. 11.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Documentation Coolant system Electrical handwheel Laser head: 100 watts Laser operating hours: 6177 h / 2802 h Machine operating hours: 18703 h / 4738 h

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 5-axis machining center Hedelius ACURA 65, including standby magazine Control system: TNC 640 Year of manufacture: 2017 Internal machine number: 80 Travel distances: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Rotary-swivel table: Ø 650 x 540 mm Swivel range: +30° to -115° Table load: 500 kg Mount: DIN 69871 AD 40 Tool magazine: 65 positions Spindle speed: 50 - 14,000 rpm Accessories Standby magazine with 180 spaces Crodpfx Asz Ix Uwspbsh Incline bed coolant system SKM 900 Chip conveyor LTA extraction system 3D measuring probe Coolant gun KinematicOpt

Condition: used, Year of construction: 2012, functionality: fully functional, Spinner TC 600 65 SMCY with C-Y axis and sub-spindle Technical data: max. swing diameter ~600 mm max. turning diameter ~400 mm max. turning length ~650 mm Travel X/Y/Z: X 275 / +50/-40 / Z 700 max. rapid traverse X/Z 15/24 max. speed 4500 rpm spindle power 22 kW torque 250 Nm max. speed sub-spindle: 6000 rpm chuck 165 mm spindle power sub-spindle: 10 kW tailstock 8 taper socket MK4 Number of tools: 16 tool holder: VDI 30 Crjdpfx Aoz Iqf Ujpboh max. speed rotating tools: 5000 rpm power (60%): 6 kW torque (60%) ~30 Nm Weight: 5,000 kg Dimensions: 2.5 m × 1.6 m × 2 m Accessories: chip conveyor tool holders extraction system

Condition: excellent (used), functionality: fully functional, Complete sawing frame for EWD Esterer gate, type HDN 600 or HDS 600 with width adjustment. Includes Jansen double-yoke tensioner. Lightly used. Ideal for keeping spare parts in stock. Cjdpfx Apjzn Uv Hjbsrh

Condition: used, Esterer Linck debarking machine, model ELC ER 72 N 12 SR. Suitable for trunk diameters of 10 to 75 cm. Feed rate up to 70 m/min. 12 infeed and outfeed rollers. Minimum wood length: 1.80 m. Debarking rotor with 6 knives. Hydraulically pre-tensioned. Main motor: 55 kW. Feed motor: 7.5 kW with 2 speeds. Also ideal as a replacement machine, as many new parts have been installed in recent years. Crsdpsz Dvdzefx Apbsh

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Mafell Elektronik handheld router LO 65 Ec with Arunda 80N Maxi and LO-FA router adapter used, from business liquidation Woodworking machine with fine adjustment for routing depth for delicate work, as well as template applications in solid wood Technical data according to the manufacturer: Mafell handheld router Type: LO 65 Ec Year of manufacture: 2021 Routing depth: 0 - 65 mm Universal motor: 230 V Tool holder (mm): 1/2" / 6 - 12 mm Design: MidiMAX in T-MAX Weight: 6.9 kg Idle speed: 10000 - 22000 1/min Power: 2600 W additional accessories, as shown in the picture: Cedpfx Asz H Up Ispbsrh Mafell Arunda 80 N router template, year of manufacture 2022 Mafell LO-FA router adapter Copy ring ø 27mm Dust extraction hood We recommend an inspection to avoid misunderstandings. Information provided without warranty Information, details, and technical data from the manufacturer To prevent any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am and 12:00 pm and 1:00 pm to 4:30 pm. During this time, inspections and collections are possible and desired, AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Condition: used, functionality: fully functional, Well-maintained, inclined cross conveyor from Esterer, originating from a small sawmill. Drive via geared motor. 6 chain strands. Spacing: 2300 mm - 1500 mm - 1200 mm - 1000 mm - 1200 mm. Crjdpfxezw Epce Apbsh Conveyor length approx. 3000 mm. Chain pitch 80 mm.

Year of construction: 1995, condition: ready for operation (used), Manual edger DK 90 consisting of: 2 x under-table crosscut saws, line laser, edger, roller conveyor with slat separator, and tilting table. Naturally equipped with all associated control cabinets and hydraulic power unit. Additionally included are numerous templates and a fixed slat head. Inspection is possible upon prior and mandatory appointment. The price is exclusive of 20% VAT, ex works, excluding dismantling, loading, contract preparation, and customs clearance costs. Csdpfeq U R Etjx Apborh

Condition: excellent (used), functionality: fully functional, Low-profile roller conveyor system. Length 12.20 m. Roller length 1.40 m. Crsdozumy Rspfx Apbeh Equipped with support rollers and a lifting transfer conveyor with 4 chain strands. Incline conveyor belt for side products, to increase the drop height. Left-hand spiral roller conveyor with a counter roller.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 Table rotation, C-axis: 360° Table swivel, B-axis: -50° to +110° Distance from spindle nose to table: 150 mm Table clamping surface: Ø 650 Table load capacity, max.: 300 kg Table slots: 5 x 18H7 x 100 mm Credpfx Ajz Diq Ujpbjh Centering bore: Ø 50 H7 x 30 mm Workpiece size, max.: Ø 520 x 330 mm Machine accuracy: VDI I DGQ 3441* Positioning accuracy: +/- 0.006 mm* Axis resolution: 0.001 mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive, AC motor, direct drive Drive power (100% / 25% ED): 10.0 / 17.0 kW Speed range, stepless: 20 - 12000 rpm Spindle taper: SK 40 DIN 69871 Torque at (100% / ED): 63.7 / 108.6 Nm Axis drives: Axes X, Y, Z: AC motors Axes B, C: AC motors Travel speeds: Rapid traverse in axes X, Y, Z: 36 m/min Speed, max. B-axis: 25 rpm Speed, max. C-axis: 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system: External tool cooling via external nozzles Coolant tank: 280 l Operating pressure, external: 0.9 bar Coolant system, internal tool cooling DIN 69871 Form A Operating pressure, internal coolant supply: 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control: Heidenhain iTNC 530, full simultaneous 5-axis version - Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Swarf conveyor with discharge height 800 mm • Spindle cooling – radiators – plate cooling for spindle motor - Full protective enclosure with cabin roof Tool magazine VZG 65 5A by Indunorm: Number of tools: 100, with a tool length of up to 320 mm / can be converted to 125 tools, then a tool length of only 200 mm is possible. Tool diameter, max.: 80 mm Tool diameter, max.: 130 mm (with free adjacent positions) Tool change with double gripper - Linear path measuring system in axes X / Y / Z (glass scale) - Direct encoder in axes B / C - Temperature compensation - IR measuring probe – 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double-circuit filter • Switchable filter cartridges • Filtration rate: 10 µm Band filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: Handling weight, max.: 100 kg (35 kg) Pallet capacity: 6 pallet positions up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance: 180 mm - Clamping force: 4 x 12500 N - Repeatability: 0.005 mm - Axial load, max.: 4000 kg • Zero point clamping plate 320 x 320 - Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, force clamping devices and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary feedthrough integrated in the table • Pneumatic lines led to the outside • Pneumatic maintenance unit • Control via M commands logical inputs and outputs prepared incl. 7 pallets 320x320 with 6 vices and one 3-jaw chuck !!without tool holders and without tools!! Machine ex works, without delivery and assembly, all information without guarantee, price plus statutory value-added tax.

Condition: used, Year of construction: 2007, machine/vehicle number: 4801250 / PH06 11 005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 55,000 kg, year of last overhaul: 2024, clamping force: 3,000 kN, mold height (min.): 1,000 mm, plate length: 2,800 mm, plate width: 2,200 mm, Equipment: CE marking, documentation/manual, For sale is a KraussMaffei LFI shuttle mould carrier for polyurethane processing and backfoaming of large-format components. The system was designed for PU moulding and LFI applications and features a hydraulic clamping unit with a movable lower mould mounting platen. Technical data: Manufacturer: KraussMaffei Type: FT-R-H-25-20-3600.0°.65° Year of manufacture: 2007 KM order number: 39000233 Control system: Siemens S7 Clamping force: 3,000 kN Opening force: 800 kN Parallel stroke: 600 mm Mould mounting platens: 2,500 x 2,000 mm Minimum mould height: 1,000 mm Maximum mould height: 1,500 mm Maximum total mould weight: 10,000 kg Maximum upper mould weight: 5,000 kg Upper mould mounting platen pivotable up to 90° Machine weight: approx. 55,000 kg Operating voltage: 400 V Scope of supply: LFI shuttle mould carrier Hydraulic units Control unit Shuttle / traversing unit Production moulds and temperature control units are not included in the scope of supply. Extensive original KraussMaffei documentation is available, including operating manuals, technical drawings, electrical diagrams and spare parts documentation. The machine is fully functional. Inspection under power is possible by prior appointment. The machine is located in the Hamburg area, Northern Germany. The exact location will be provided to qualified prospective buyers. Dismantling, loading and transport are to be carried out by the buyer. Further technical documentation, drawings and photographs are available upon request. Cjdpfx Aez Dn Ixjpborh Subject to availability.

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 650 mm, turning diameter: 250 mm, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, CNC lathe Gildemeister Twin 65Y RG2 Year of manufacture: 2003 Control system: Siemens 840D Type: CNC twin-spindle turning center Main/counter spindle: Yes Turret: 2 × 12 stations Tool holder: VDI 30 Driven tools: Yes Y-axis: Yes (upper turret) C-axes: Main and counter spindle Working area Characteristic Value Max. turning diameter: 250 mm Max. turning length: 650 mm Max. turning diameter over the bed: approx. 340 mm Bar passage: 65 mm Main spindle Characteristic Value Speed: 20–5,000 min⁻¹ Power: 35 kW Torque: 370 Nm C-axis: 0.001° Counter spindle Characteristic Value Speed: 20–5,000 min⁻¹ Power: 35 kW Torque: up to 370 Nm Bar passage: 65 mm C-axis: 0.001° Csdpfx Apjzl Dy Njberh Travel paths Axis Value X1: 300 mm Z1: 650 mm Y: 80 mm (±40 mm) X2: 180 mm Z2: 650 mm Tool turret Number of stations: 12 + 12 Tool holder: VDI 30 Driven tools: 4,000 min⁻¹ Power of tool drive: 11 kW Torque of tool drive: 28 Nm Chip conveyor High-pressure pump Bar loader magazine, manufacturer IRCO, type SiMag 42

Condition: used, Year of construction: 2013, x-travel 700 mm y-travel 700 mm z-travel 700 mm control 840 D sl Siemens Max. Speed Subspindle 10.000 min/-1 power capacity - main spindel 42 kW max. Torque 236 Nm tool taper HSK-A 63 DIN 69893 Number of pallet-stations 10 pos. size of pallet 500 x 500 mm max. workpiece weight 600 kg max. workpiecediameter 800 mm max. workpiece height 1.000 mm number of toolpositions 180 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 550 mm max. tool weight 12,0 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 sec rapid traverse ( X / Y / Z ) 60 m/min feed speeds max. 60.000 mm/min Accelaration x/y/z: 6 / 6 / 5 m/s² feed power 10 kN total power requirement 67 kW weight of the machine ca. 9,7 t Cedpez I Dy Sefx Apberh dimensions of the machine ca. 7,5 x 5,0 x 2,8 m CNC - Machiningcenter Horizontal DECKEL MAHO - DMC 65 H duoBLOCK

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Cjdpozht Hwofx Apberh Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc.