Esterer cross conveyor

Esterer QF6

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Gsdpfx Ageykr Aqe Tjuh Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 3,375 mm, WEIMA Crusher Series HWV 3000 (37 kW) and the Single-Shaft Shredder WL12 (30 kW) Ideal for pre-shredding wood waste such as pallets, followed by metal separation and secondary shredding. Advantages: Two-stage process: Pre- and post-shredding for maximum efficiency. Versatile use: Wood chips for heating systems or briquetting presses. Low-noise operation Technical details – HWV 3000: - Power: 37 kW - Dimensions (hopper): 3375 mm width x 1630 mm height - Cutting knives: 58 knives in two rows Technical details – WL12/30: - Power: 30 kW - Shaft diameter: 368 mm - Screen: 15/20 mm Applications - Wood waste processing and recycling Godpfx Asy Ubvpsg Teuh - Energy generation through wood chips or briquetting

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, used automatic edging line Möhringer Autojet S-singulator, infeed roller conveyor, through-feed cross-cutting automatic measuring table with infeed edging saw with double-lamella chip separator driven roller conveyor with pull-off device control system and electrical cabinet Gjdpfx Aow Tkt Hog Touh

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Log handling line, LINCK sawmill line, lumber sorting line with stacking system Log handling line: - Infeed - Cut-to-length - Turner - Emergency outfeed channel, possibility of log discharge - Root flare reducer (butt reducer) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 boxes LINCK sawmill line: LINCK Canter V40, year 1997 • Max. roundwood diameter: 650 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK Multi-rip saw CSMK 375-A3/B3, year 1997 • Min. timber length: 3.00 m • Min. cutting thickness: 50 mm • Max. cutting thickness: 375 mm • Feed speed (frequency controlled): 25-70 m/min • Saw diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Plate • Shaft speed: 2500 rpm • Drive power per saw shaft: 110 kW • Weight (with motors): 18800 kg LINCK Turner DV 55, year 1996 • Feed speed: 36.2 m/min • Max. log diameter: 550 mm LINCK Canter V30, year 1996 • Max. roundwood diameter: 500 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK Milling unit VP34 • Min. timber length: 3 m • Max. timber length: 4900 mm • Max. milling depth: 50 mm • Max. cutting height: 120 mm • Min. board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK Saws S2 VS 66 S • Min. timber length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK Multi-rip saw S3 VSV 80-A, year 1988 • Min. timber length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Plates LINCK Horizontal saw KH1, year 1985 • Min. timber length: 3 m • Min. cutting height: 60 mm • Max. cutting height: 140 mm • Max. cutting depth, right saw: 140 mm • Max. cutting depth, left saw: 140 mm • Min. cutting depth: 130 mm • Feed speed: 40 m/min • Saw diameter: 520x5.8/4.0x150 mm Lumber sorting: Lumber sorting by length, width and thickness 32 boxes for lumber Stacking and bundling system for lumber packs The offered line has a real capacity of approximately 70 000 m3 - 110 000 m3 per year in one-shift operation. Godpfsyyd Tnsx Ag Touh Huge spare parts inventory. Sharpening room. We offer complete service from sale to installation and commissioning in the new location. For an additional fee, professional dismantling, loading and commissioning in the new location are possible.

Year of construction: 1985, condition: good (used), Linck recutting group consisting of: EV 40 infeed V40 chipper with pull-out rollers with 2x75/100 kW Gedpfxjufqico Ag Teuh MKV circular resaw with side board separator with 2x200 kW incl. hydraulic units without switch cabinets can be inspected by arrangement. System can also be offered overhauled!

Condition: ready for operation (used), Cambio 75 feed conveyor, infeed conveyor wheels Godpfov Irvusx Ag Tsuh

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: Gedpfxey Uzhfs Ag Tjuh without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Condition: used, functionality: fully functional, color: yellow, Year of construction: 2017, operating hours: 13,450 h, LIEBHERR LH40M. Year: 201. Hours: 13,450. Four grapples. Solid tires. Hydraulic cabin. 9.10 m industrial boom. 7.50 m industrial stick. CE certificate. Very good condition. Gjdpjxl E Afefx Ag Tjuh

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated side board processing line with singulation, trimmer for end trimming, 2 stacking machines, additional discharge, and end trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at a joystick: - Boards are conveyed laterally using a 4-strand overhead chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Nlewsy Uzhfj D A Tmcob - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick assesses: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box, with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats, with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - trimming length 505 mm for the underlying vibration channel - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - automatic lowering of the finished packages and transfer to automatic strapping Godpfx Asy Uzldeg Teuh - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee processed, packaged, and strapped approximately 15,000 boards of side lumber 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping plant has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. A video of the process can be shown via WhatsApp!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Log yard with restacking unit Complete log handling system from the log receiving area to the transfer to the debarking line. The system performs automatic log handling, singulation, end trimming, metal detection, butt end reduction, debarking, 3D measurement, and sorting of the logs. Key technical data Guedpfozvyl Ajx Ag Toh Capacity: approx. 30,000 m³ of logs in a single-shift operation Log diameter: approx. 160–660 mm Log lengths: 4,000–5,250 mm Special lengths up to 6,100 mm Long logs up to approx. 20 m Herzog processor head with 55 kW hydraulic unit End trimming diameter up to approx. 700 mm Integrated metal detection Hobest Primus butt end reducer for log diameters up to 900 mm EWD ER 90 debarker with rotor opening 100–900 mm Rotor drive: 45 kW, frequency-controlled Feed speed during debarking up to 30 m/min Calibrated Microtec 3D log scanner Sorting block conveyor with five hydraulic discharge stations The restacking unit automatically returns, singulates, and realigns the logs for feeding to the debarking line. It consists of, among other things, an approx. 18 m long log handling conveyor, a four-stage inclined conveyor, a 90° curved conveyor, a double-strand block conveyor, a transverse conveyor, and an integrated log turner. The restacking unit can be purchased separately if required.