Used Fanuc P-50Ia for sale (42,857)

Condition: like new (used), Year of construction: 2007, operating hours: 690 h, functionality: fully functional, machine/vehicle number: F-87459, input voltage: 400 V, type of input current: three-phase, This robot is a 'lazy dog'. Despite its age, it has just 70 hours of operating time. It served as a test robot and was not actually used in production. Nevertheless, it has received regular maintenance from Fanuc. Its condition is almost as new. It can be mounted on the floor, wall, or ceiling. The machine has been inspected and has undergone a trial run. If interested, the robot can be viewed at our facility. Delivery and initial commissioning are also possible. Kodpfx Ajw Tl S Dsh Dodr

Condition: good (used), Year of construction: 2013, It was disassembled from a working machine, all is working. Kdsdpfx Aeurk E Seh Der All cards shown in the picture are for sale.

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. Kedpotu Hpqjfx Ah Dedr The device can be inspected under voltage at Paintrobotics.

Condition: like new (used), Year of construction: 2019, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Electric Kdjdpfszktkzex Ah Der FANUC Roboshot α-S100iA : Basic Technical Specifications Mechanism: Double toggle Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_ Die height double platen: 150–450 mm _(opt. 150–550 mm)_ Die height single platen: 220–520 mm _(opt. 220–620 mm)_ Clamping stroke: 350 mm Locating ring: Ø 125 mm Tie bar spacing (H×V): 460 × 410 mm Platen size (H×V): 660 × 610 mm Min. mould size (H×V): 265 × 240 mm Ejector stroke: 100 mm Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_ 1. Clamping force: 1000 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 2200 bar 4. Min./Max. mold height: 150 mm / 620 mm (extended) 5. Clamping stroke: 350 mm 6. Tie bar spacing: 460 × 410 mm 7. Ejector stroke: 100 mm 8. Screw diameter: 32 mm (103 cm³) 9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF) 10. Nozzle: Standard open R19D4 Control & Software (FANUC 31i-B CNC) 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Standard Machine Equipment 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian)

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf Kdsdozkttcopfx Ah Der

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. We have two of them. Kedpfx Ahstu H Hco Dodr We would also bring the device to us from Frankfurt.

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. Kjdpfx Aetu H Aveh Djdr We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: E1361000, overall weight: 600 kg, load capacity: 8 kg, arm reach: 2,028 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R-30iB Plus, teach pendant manufacturer: Fanuc, teach pendant model: Fanuc A05B-2256-C101#EGN, control cabinet width: 600 mm, control cabinet height: 600 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, welding current (max.): 400 A, Equipment: documentation/manual, Fully functional and in excellent condition robot welding cell. Fanuc arm and 2-axis positioner, Fronius powersource, wire feeding and push-pull torch. FANUC ARC Mate AM-100iC/8L robot R-30iB Plus controller FANUC 2-axis postitioner A05B-1220-J201-N, payload 500kg Fronius TPS 400i powersource with PMC package Kedozu Irnjpfx Ah Djdr Thielmanni nozzle cleaner SICK curtains Installed 2021 Robot station is fully operational, in good condition and can be seen in use.

Condition: refurbished (used), A06B-6117-H105 Servo Amplifier, FANUC, refurbished and tested. Kdjdpfjzi Sv Hsx Ah Dor Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. For more parts and other materials, you can also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: new, Year of construction: 2026, We develop and produce custom robot grippers precisely tailored to our customers’ requirements. Kodoyrfarepfx Ah Dsdr

Condition: ready for operation (used), Year of construction: 2011, Fanuc RoboCut Alpha 01E Year 2011 X-axis travel is 600 mm Y-axis travel is 400 mm Z-axis travel is 300 to 310 mm. Workpiece Capacity: Accommodates pieces up to 1050 mm long, 820 mm wide Kjdpfx Aszvlgrjh Dedr Weighing up to 1,000 kg. Control Unit: Uses the advanced Fanuc Series 31i-WA CNC system. Features: Includes automatic wire threading (AWF), reliable re-threading, integrated fluid cooling, and precision twin-servo wire tension control.

Condition: like new (used), Year of construction: 2019, operating hours: 399 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, mold height (min.): 250 mm, ejector force: 35,000 N, ejector stroke: 150 mm, opening stroke: 550 mm, plate length: 900 mm, plate width: 900 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S-220iA – fully electric injection moulding machine, year 2019 Very lightly used precision injection moulding machine with only 399 operating hours. The FANUC ROBOSHOT Alpha S-220iA combines high repeatability, dynamic movements and energy-efficient production. Suitable for demanding technical plastic parts and reliable series production. Technical data: - Clamping force: 2,200 kN (220 t) Kdedpfx Ajznd Dyjh Der - Double-toggle clamping mechanism - Tie-bar spacing: 650 × 650 mm - Platen size: 900 × 900 mm - Mould height: 250–750 mm, extended version - Clamping stroke: 550 mm - Ejector stroke: 150 mm - Maximum ejector force: 35 kN - Screw diameter: 48 mm - Shot volume: 318 cm³ - Maximum injection speed: 200 mm/s - Maximum injection pressure: 1,900 bar - Locating ring: Ø 160 mm - Fully electric drive Control and equipment: - FANUC 31i-B CNC control - 15-inch LCD touchscreen - AI mould and ejector protection - Precision metering and pressure-profile functions - Automatic mould-height adjustment - Energy-consumption measurement - Euromap 67 robot interface - Three independent air valves - Cascade control for up to eight valves - USB and memory-card output - Four-circuit flow meter The machine is in like-new condition and fully operational. Inspection is available by appointment. Price, delivery time and further information are available on request.

Condition: refurbished (used), Year of construction: 2008, The wrist is new and has never been assembled. It was as a spare part for a paint shop with Fanuc robots. The new price at Fanuc is €18,000.00. Kdsdsihb Axjpfx Ah Djr

Condition: excellent (used), Year of construction: 2018, clamping force: 500 kN, Equipment: documentation/manual, Clamping force - 500/650 kN Injection cylinder diameter - 27 mm Theor. Cylinder volume - 50 cm3 Centering circle diameter - 125 mm Min. mold height - 210 mm Max. mold height - 460 mm Max. opening of the cap - 600 mm Distance between columns (vertical) - 320 mm Distance between columns (horizontal) - 360 mm External dimensions of the clamping plate (w x h) - 500 x 470 mm Number of hydraulic cores - 0 Number of pneumatic circuits - 2 Max. ejector stroke - 70 mm Power consumption - 30 kW Equipment / Options: 1. Power transformer AC400V → AC200V 2. Air ejector – 3 circuits 3. Reject part detection 4. Euromap E67 5. USB interface Kdjdpszn Uqwefx Ah Djr 6. Parallel mould movement / dosing 7. Parallel mould movement / ejector 8. Pre-injection function 9. Precision dosing function 10. Screw check valve backflow measurement 11. Shut-off nozzle – software 12. Hot runner valve gates – 8 circuits (software) 13. Communication with temperature controllers (software) 14. Intelligent mould protection 15. Intelligent ejector protection 16. Tool kit 17. Fuse kit 18. 21 freely programmable inputs/outputs 19. 2× analogue inputs 0–10 V DC 20. Alarm beacon with audible signal 21. Czech operating manual 22. 1-day operator training at customer site 23. Commissioning 24. Automatic clamping force correction during operation

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Your advantages: • 1,000 kN clamping force • FANUC 31i-B CNC control with a 15-inch touchscreen • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: Kjdpszrikmsfx Ah Dedr • Plate dimensions 660 × 610 mm • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm • Ejector stroke 100 mm, ejector force 25 kN Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request.

Condition: good (used), Fanuc Level Shifter PREMOSYS VE-P-0001 Level Converter VEP0001 | VE-P Shifter Kdsdpfx Ahjxl S Ubo Dor PREMOSYS VE-P-0001 Level Converter This module is used to convert encoder signals fed in by a commercially available encoder. These signals can reach levels from 5 to 24V DC. A potential-free conversion to an output level of 5V DC with RS-422 characteristics takes place. In addition, the pulse frequency of the output signals can be output in divider ratios of 1/2/4/8/16/32/64 and 128, whereby the counting direction can be negated. For this purpose, simply flip a DIP switch. The division ratios refer only to the encoder counting signals (K1 and K2); the encoder zero signal is output undivided. Technical specifications: 5 to 24 V encoder signal input 5 V RS 422 output signals Input frequency up to 1 MHz Division ratios 1 to 128 Optical status indicator DIN rail mounting Lockable connectors Manufacturer price: €5,680 You can find more Fanuc robots and components in our shop! Some products are also available in larger quantities.

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, You get two machines for the price of one. One is fully functional and in good condition for its age, equipped with a collecting system (sliding slats). The other can be made functional again with minimal effort, but the new owner can also use it for spare parts (all electrical cards are intact; the pump system and wiring harness require repair). The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision of the German Matra machine tool engineering. Kdsdpfx Ahszcww Ro Dor

Condition: good (used), Year of construction: 2000, functionality: fully functional, overall weight: 1,400 kg, 2 Fanuc spray robots with spray guns, used for painting and lacquering MDF board edges, are being sold as a set. Kedpfjzb Dgpex Ah Djdr

Condition: ready for operation (used), Year of construction: 2021, A Fanuc CNC drilling and machining center is available. Travels X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle speed: 24000rpm, spindle power: 5.5kW, torque: 7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool positions: 21, tool interface: BT30, positioning accuracy: 0.006mm, repeatability: 0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/2200mm, weight: approx. 2500kg, control: Fanuc 31i-B5, power-on hours: 6534h, operating hours: 473h. Documentation available. An on-site inspection is possible. Kdsdpfszlt Shsx Ah Der

Condition: used, Year of construction: 2020, Standard 70 kg payload multipurpose robot This innovative series of lightweight robots features a slim wrist, rigid arm and small footprint. Offering best payload and inertia in its category, this powerful 6-axis model is suitable for various applications and combines a 70 kg payload with extremely high axis speeds. Kdedpfszbgmlsx Ah Dsr

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A04B-0105-B133#BBH, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 54 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 54 m/min, table width: 850 mm, table length: 410 mm, table load: 300 kg, overall weight: 2,200 kg, spindle speed (max.): 10,000 rpm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2x FANUC Robodrill α-D21MiB5 Plus Kjdpfx Ahexwiglo Dedr

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101D1902, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 300 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 775 mm, Equipment: documentation/manual, We are selling a wire erosion machine. Condition: used, fully functional Technical specifications: Manufacturer: FANUC Model: Alpha 1iD CNC control: FANUC 310i-WA Operation: Touchscreen; Editor Manual control panel: yes Travel ranges: X 600 mm × Y 400 mm × Z 310 mm U/V axes: ±100 mm (total travel of 200 mm) Wire diameter: 0.10–0.30 mm Max. workpiece size: approx. 1,050 × 775 × 300 mm Automatic wire threading (AWT) Machining under water; full immersion machine Ethernet and USB connection The FANUC Alpha 1iD offers reliability, very good cutting quality, and low maintenance requirements. Ksdjzlg Agopfx Ah Dedr High-quality clamping devices, Hirschmann System 4000, can also be included. The machine can be inspected and tested by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 4,500 h, input voltage: 400 V, travel distance X-axis: 700 mm, number of slots in tool magazine: 21, controller manufacturer: fanuc, controller model: 31i model B5, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, spindle nose: BT 30 big plus, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FULL OPTIONAL TAPPING CENTER high torque/power version, complete with: spindle cone with BIG PLUS attachment FANUC DDR-T: continuous fourth axis (direct drive motor) with braked counter support and plate rotary joint for hydraulic feed to center table (for automatic workpiece clamping/unclamping) hydraulic power unit for workpiece clamping Kdjdpjuby Sxjfx Ah Djr high-pressure refrigeration through the spindle chip conveyor evacuation automatic side poet robot interface tool setter RENISHAW TS-27 perfect machine with only 4,500 spindle hours!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 3,800 h, overall weight: 27 kg, load capacity: 7 kg, arm reach: 911 mm, controller manufacturer: FANUC, controller model: R-30iB Mate, number of axes: 6, This 6-axis FANUC LR Mate 200iD/7L auf Bosch APAS assistant i6 was manufactured in 2015. It features a mobile base unit, a FANUC System R-30iB Mate control unit, and a custom-built pneumatic gripper. With 3,800 operating hours, this collaborative robot offers versatile automation capabilities. If you are looking to get high-quality automation capabilities, consider the FANUC LR Mate 200iD/7L collaborative robot we have for sale. Contact us for further details. Kdodpfjzq Af Uox Ah Dor - Main Components: Mobile base unit Bosch APAS assistant i6 (on wheels), OpCon control panel, Robot arm FANUC LR Mate 200iD/7L, Control unit FANUC System R-30iB Mate, Teach pendant (handheld programming device)- Peripherals & Additional Modules: Pneumatic module (Festo), Pneumatic gripper (custom-built), Protective covers and mounting frame (APAS-specific)- Operating Hours: 3,800 h- Main Circuit Voltage: 1/N/PE 230V AC 50Hz- Control Circuit Voltage: 24V DC- Full Load / Short Circuit Current: 3.5A / 10kA- Min. Supply Line: 3 x 2.5 mm²- Max. Backup Fuse: 16A gG- Protection Rating: IP52- Robot Weight: 27 kg- Notes: Backup battery is dead

Condition: ready for operation (used), Year of construction: 2008, A Fanuc CNC drilling and machining center is available. Travel X/Y/Z: 700mm/400mm/330mm, distance from table to spindle nose: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, max. spindle speed: 10000rpm, spindle power: 26kW/5.5kW, torque: 35Nm/7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool stations: 21, tool interface: BBT30, positioning accuracy: 0.006mm, repeatability: 0.004mm, machine dimensions X/Y/Z: 2150mm/2050mm/2350mm, weight: approx. 2100kg, control: Fanuc 31i-B5, operating hours: approx. 9547h. Including chip conveyor and coolant tank. Documentation available. An on-site inspection is possible. Kdsdpfx Ahjzlt Sns Der