Used Fbr-Elpo Te-700 Triple Effect Evaporator for sale (24,868)

Condition: like new (used), Features: * System: Forced circulation rising film. Nlodpfx Asyn Hm Ssm Tjd * Number of effects: 3 * Tower water consumption: 625 m³/h approximately 500 m³/h with a temperature differential of 10 ºC. Includes: * 2 SIHI vacuum pumps *Flashcooler * Refractometer. * Mono PCM pump Production may vary depending on the product. Tomato input production at 5ºC Brix: 700 Tn/24 h. Production of tomato concentrate output at 28º/30ºC Brix: 4,600 kg/h.

Condition: like new (used), ASEPTIC POUCH FILLER WITH DOUBLE 1" FILLING HEAD The aseptic filler is a machine designed to fill pre-sterilized flexible containers with a pressure cap under aseptic conditions (i.e., absence of bacteria). Prepared for filling 200L and 1000L drums. * Production capacity may vary depending on format and product to be filled. INCLUDES: - Infeed and outfeed aseptic drum roller conveyor. - Internal electrical panel. Njdpfox S Hq Tjx Am Teld - Touch screen. - Hydraulic equipment.

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Nedpfx Aozcwitom Tsld Full documentation for equipment available.

Condition: used, Computer cabinet, server cabinet, control cabinet, network server cabinet, computer housing -Manufacturer: RITTAL -Type: IT Solutions TE 7000-390 -Field of view: 400 x 400 mm -Number: 1x cabinets available -Price: per piece -Dimensions: 600/600/H580 mm -Weight: 40 kg Nledpfxocm Aixe Am Tod

Condition: ready for operation (used), A Hwacheon CNC lathe is offered. Max. turning diameter: 680mm, swing over bed: 900mm, max. turning length: 1986mm, chuck diameter: 380mm, max. bar capacity: 116mm, max. spindle speed: 1800rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3071Nm/2493Nm, tool turret: 12 stations, tool interface: BMT-75, X/Z-axis travel: 360mm/2050mm, X/Z-axis rapid traverse: 18m/min, coolant tank capacity: 300l, control: Fanuc 0i-TF. Equipment: C-axis, driven tools, automatic in-process tool measurement, programmable tailstock and programmable quill, C-axis spindle clamp, chucking pressure monitoring, centralized lubrication and hinge-belt chip conveyor with chip container. Control ON: approx. 15961h, machining time: approx. 4258h, total part count: 34601. Weight: approx. 15000kg. Documentation available. Inspection possible by appointment. Nledpfoznc Rrsx Am Tsd

Condition: used, machine/vehicle number: 008479, Max. machining width: 1650 mm Min. machining thickness: 3 mm Working Table: Fixed pass height No. Operating units: 4 Nr Nsdpfx Amjy Edqwo Tjld

Condition: ready for operation (used), Traub 700 734 VEMEM/I interface board, used, in good condition, 100% functional, scope of delivery as per photos. Nlsdox Eu Tvopfx Am Tsd

Condition: ready for operation (used), Submersible pump Overall length: 1170 mm, immersion depth: 700 mm Manufacturer unknown, type plate is unfortunately not available, used, normal signs of use, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for packing and shipping costs separately! Nedex Dwgaepfx Am Tjld

Condition: ready for operation (used), Heidenhain ROD 700 18000 angle encoder Id. 203 741 61 SN:3514502H professionally fully overhauled and tested, with 6 months warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlodpfxjx Dwxpo Am Ted

Condition: like new (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, Machine type: CNC turning and milling center Manufacturer: DMG MORI Type: NLX2500SY/700 with Fanuc industrial robot, type R2000ic/165F Year of manufacture: 2018 Control system: M730 UM Mapps CELOS Country of origin: Japan Delivery time: upon agreement Incoterms: EXW Njdpfxozcpkij Am Tsld Additional information: CNC turning and milling center DMG MORI NLX2500SY/700 Turning diameter max. 356 mm Turning length 705 mm Control system: M730 UM Mapps CELOS Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 4,000 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore 80 (91) mm C-axis: 0.001° Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle bore 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Rapid traverse rate (X / Y / Z): 30 / 10 / 30 m/min Number of tool positions: 12 Shank height for square tools: 25 mm Shank diameter of drills: 50 mm Tool change time: 0.27 sec. Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 4.2 kW Total power consumption: 41 kVA Machine weight: approx. 6.4 t - Counter spindle - Tool drive - C, Y-axis Subject to errors in technical data. The scope of the accessories is exclusive and limited to the description in the text. No claims can be made regarding additional accessories shown, e.g. for illustrative purposes.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Nlodpfx Ajyw Ndmem Ted Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: good (used), Granite Measuring Plate 760 x 1190 x 700 mm Dimensions: H x W x D 760 x 1190 x 700 mm Material Thickness: 800 mm Find more items – new and used – in our shop! Nljdpfx Aoxl Rkujm Tsd International shipping costs on request!

Year of construction: 2016, condition: ready for operation (used), A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible. Nedextfgyspfx Am Teld

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: Nodpfjua Tbwox Am Teld The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Weishaupt RGMS 40 dual-fuel burner for gas and heavy oil. 2700 kW. Nljdpfomnqbtex Am Tsd

Condition: good (used), The scope of delivery includes: 1x used pallet racking beam Material color: orange IPE profile: 100 x 55 mm Connector: 3 holes Clear width: approx. 2,700 mm Nsdjibzftjpfx Am Teld 3 holes per connector Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm 1x set of fastening material consisting of: 06x screws M10 06x nuts 06x washers

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank We offer you a used pallet racking beam from the manufacturer Vogelsang for sale. Technical data for the pallet racking beam: Manufacturer: Vogelsang Type: NS Included in the scope of delivery: Nlodpfxofq Du Dj Am Ted 01x Pallet racking beam, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm Max. load per beam pair: 2,700 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting Our services at a glance: (Prices on request) Assembly, installation Please note our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Technical data for the pallet racking crossbar: Racking system: Vogelsang Type: NS Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: cream white Crossbar type: K110 Box profile: 110 x 50 mm Clip: 4 HK (hooks) Clear width: 2,700 mm Max. load per crossbar pair: 2,700 kg, with evenly distributed load 02x Locking pins, used Nodpfx Ajibbd Hsm Teld Design: fully galvanized For securing the longitudinal supports against unintentional lifting out.

Condition: good (used), Technical data for the pallet racking beam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking beam, used Material color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Clip: 3 HK (hook) Clear width: 2,700 mm Max. load per beam pair: 900 kg, with evenly distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out Additional information about the pallet racking beam: Beam type 4 BST is used to insert chipboard, steel panels, etc., which then end up approximately flush with the top edge of the racking beams. This avoids any height loss. Furthermore, the front of the step beam protects the floors or the insertion segments from damage. The beams are not intended for pallet storage but serve as picking levels; i.e., for storing cartons, small parts, etc. Nodpfxskvnm Ae Am Tjld

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Meta (Thyssen) The scope of delivery includes: 01x pallet racking beam, used Nljdsuny A Sspfx Am Tod Material color: orange Box profile: 140 x 50 mm Beam type: HN 140|15 Bracket: 4 HK (hooks) clear width: 2,700 mm Max. load per pair of beams 4,000 kg, with evenly distributed load 02x safety pins, used Version: completely galvanized For securing the longitudinal beams Against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow Nedpfxelwuw Ue Am Tsld type of truss: B120ZC box profile: 120x50 mm agraffe: 3 hooks clear width: 2.700 mm max. load per truss pair 2.700 kg, with evenly distributed load 02x safety pins, new execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is offered for pickup only. A desired beyond that Transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 1x used pallet rack beam Material color: orange IPE profile: 100 x 55 mm Bracket: 5 holes Clear width: approx. 2,700 mm Nlodpfxjibzgxe Am Tod Per bracket: 5 holes Hole spacing: approx. 50 mm Hole diameter: approx. 11 mm 1x set of fastening materials consisting of: 10x M10 screws 10x nuts 10x washers

Condition: good (used), The scope of delivery includes: 1x used pallet racking beam Material color: orange Box profile: 130 x 40 mm Connectors: 4 hooks Type: Head beam Clear width: 2,700 mm Nljdpfxohqh Hao Am Tsd Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope.

Condition: excellent (used), For sale: a Vötsch VT 7004 climate chamber, designed for precise research and testing under controlled temperature conditions. This unit is suitable for use in laboratories, quality control departments, materials research, electronics, and the automotive industry. Nedpfezi U Tnsx Am Teld The chamber is equipped with an electronic temperature controller, an efficient cooling system, and a forced air circulation system that ensures uniform temperature distribution throughout the working chamber. The interior is made of stainless steel, which facilitates cleaning and ensures high durability. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VT 7004 Year of manufacture: 2000 Device number: 58566024350010 Power supply: 230 V AC, 50 Hz Rated power: 2.0 kW Rated current: 10 A Refrigerant: R404A – 0.7 kg R23 – 0.22 kg Maximum working pressure: 25 bar Interior: stainless steel Electronic temperature controller Forced air circulation Door with silicone seal Lighting and service access port in the chamber Compact design Condition: Used unit. Visually in good condition. The chamber is clean and complete. Sold in the exact condition as shown in the pictures.

Condition: excellent (used), Viessmann Vitoplex 700kw.Bj.2012, low temperature boiler, burner for biogas possible ,oil burner possible,Weishaupt ,on request in sea container with all accessories parts,pumps,chimney,controls,pipes . Nlsdpfsnqyxljx Am Ted