Used Flash Off Dryer Ven Dry Oir for sale (12,833)

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW Iodpfoxfkbaex Acfsti - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm Iodpfx Acjzf N Ilofeti - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm Itedsu S N R Ejpfx Acfoi - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 Itjdpfeyuut Hox Acfei -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Manufacturer: Norweld, drying oven with isolation transformer -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available -Price: per piece Isdpfxjyuvp As Acfoti -Transport dimensions: 520/230/H560 mm -Weight: 14 kg/pc.

Year of construction: 2009, condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W Isdpfxox Sw N Hs Acfsti -Dimensions: 385/365/H695 mm -Weight: 24.4 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 230 V, total length: 6,096 mm, total width: 3,730 mm, total height: 173 mm, compressed air connection: 6.9 bar, type of input current: AC, year of last overhaul: 2026, overall weight: 1,656 kg, conveyor belt width: 910 mm, product height (max.): 2,000 mm, FOR SALE – COMPLETE AUTOMATIC M&R SCREEN PRINTING PACKAGE £25,000 + VAT (ONO) Location: Mid Wales, UK Due to business closure, we’re offering our complete automatic screen printing production package for sale. This is a fully operational, professionally maintained setup that is ready for removal and installation to a new premises. Equipment Included: 2018 M&R Diamondback S - 10 station / 8 colour Automatic Press • Under 400,000 impressions • Excellent working condition • Serviced annually • Full set of adult platens • Full set of junior platens • Full set of sleeve platens • Selection of squeegees and floodbars (10+ of each) • Includes 2 x Red Chili flash cure units 2018 Radicure 36/10 Electric Conveyor Dryer • 20ft conveyor length Itsdezb N Rtepfx Acfei • Excellent working condition 2014 ABAC Genesis 7.5 270 Air Compressor • Serviced annually • Fully operational Key Features: • Complete automatic production package • Low impression count for an automatic press • Professionally maintained throughout • Annual servicing on press and compressor • Ideal for established print shops looking to increase capacity or businesses moving into automatic production • Available immediately due to business closure More photos and video demonstrations are available on request. We can provide contact details for experienced machinery relocation specialists who are familiar with dismantling, transporting and reinstalling screen-printing equipment.The purchaser will be responsible for dismantling, transport and installation of the equipment. Everything clean and ready to use. Located in Mid Wales, UK. Price: £25,000 + VAT (ONO) Serious enquiries only please - more photos and videos can be provided. Viewing is welcome upon request. This setup is a bargain and a great addition to any new or established business.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. Iedpfsfz U Hvjx Acfeti In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 1999, condition: used, Tek-Dry Continuous Conveyor Dryer 7-zone Max temp 160 C Estimated 1,000 kg/hr capacity PLC touchscreen controls Multi-zone hot air/steam heating Integrated blowers Itsdpfjzl Um Tex Acfoi

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 503382, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, total length: 1,300 mm, total width: 650 mm, total height: 1,750 mm, overall weight: 150 kg, number of chambers: 2, year of last overhaul: 2023, We are offering this ready-to-use Amboss Langbein D2x8 dry air dryer with cooler, manufactured in 2006. Manufacturer: Amboss Langbein Model: D2x8 Itodpfxezarqme Acfoi Year of manufacture: 2006 Condition: ready for use Type: Dry air dryer with industrial cooler Hopper volume: 2 x 50 liters Flow rate: 2 x 15 kg/h Drying temperature: 30-160 degrees Celsius Dry air volume: 80 m3/h - 180 m3/h If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Itodpfxezmdl Ie Acfei Drive power 30 kw A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Itedpfx Acjzmc Riofoi

Condition: used, - Manufacturer: Venjakob - Model: VEN DRY DTK 040 Isdpfx Aey Ragfjcfeti - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) Itodpezg Dx Ujfx Acfei - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Itsdpfxoxgdrbs Acfsi

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Isdpfxey Ny U Te Acfeti

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW Ijdou Tipkopfx Acfsti New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2011, Dry air dryer FarragTech CARD 10 S with container and 2 x suction conveyors ICEVA GS-4mD Stock no.: 503577 Machine type / Device type: Dry air dryer Manufacturer: FarragTech GmbH Type: CARD 10 S Year of construction: 2011 Container volume: 10 ltr. Throughput: 2 h / 3.25 kg / 80° ABS Power: 1.1 kW Voltage: 230 Volt Hopper volume: 70 ltr Isdpfx Aoy Akk Sjcfoti Accessories: 2x suction conveyors ICEVA GS-4mD

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Isdpfevc Axpex Acfoti Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), functionality: fully functional, Key operating parameters and performance: Drying temperature: from 30 °C to 160 °C (adjustable via a precise 3-point controller). Dew point: stable at approximately -60 °C, ensuring thorough drying of hygroscopic materials. Itsdpfx Acsy Ud T Refji Dry air flow rate: from 80 m³/h to 180 m³/h for devices in the compact series. Pre-drying time: reduced to only 3–4 hours for standard materials. Throughput: from 4 kg/h to 70 kg/h (values measured for Polyamide PA max).

Condition: good (used), Year of construction: 2003, inner dimension length: 7,400 mm, inner dimension width: 4,500 mm, inner dimension height: 4,250 mm, number of chambers: 1, Equipment: CE marking, documentation/manual, Drying Chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Itodpfx Acjy Evkpsfoi Internal dimensions approx. 7,400 x 4,500 x 4,250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points With frequency converter With control system Heating capacity: 223 kW Water temperature: 85 °C Water flow: 14 m³/h Voltage: 230/400 V Connected load: 12 kW Fans: 3 x 3 kW Control: MB Intellevent 5000 program The unit was previously connected to a central heating system. Central heating not included! The drying chamber will be professionally dismantled and loaded onto a truck. Transport dimensions: 12 loading meters, approx. 5,000 kg

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Koch is up for sale. Below are some technical details: - Designed for 135 kg/h for 7 machines - NEW PRICE of the system: €115,000 Model: CKT 500F, frequency-controlled version - 500 cubic meters/hour dry air - Touch panel control expansion for CKT/EKO dryers - Control system expansion integrated as a conveying system in CKT/EKO dryers, up to 16 points of demand - Containers: 1 x 200 liters; 4 x 150 liters; 2 x 60 liters, with cleaning door - Koch hopper heaters at 3 kW, 5 units - Koch hopper heater at 1.5 kW, 2 units - V2A extraction containers, 7 units Itodpoy Amr Esfx Acfei - Stationary frames, 2 units - Economy system control for gentle material drying and maximum energy savings - Empty suction valves NW 40, double empty suction, 7 units - And much more...

Condition: good (used), Year of construction: 2000, Colortronic CTT 30 Granule Dryer For climate- and air-independent drying of thermoplastic granules and regrind prior to processing, removing residual moisture from both the inside and outside of the granules. Colortronic dry-air dryers operate according to the absorption principle. Instead of heating the air, the moisture is absorbed and removed in the drying hopper. Operating voltage: 400 V Control voltage: 24 V Power: 3.5 kW Main fuse: 25 A Iodpfxsxlrdco Acfsti Year of manufacture: 7/2000 Find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The mobile dry air dryer of type KKT dries hygroscopic granulates directly next to your processing machine, and is also equipped with a TYPE 608 conveying unit. The saturated dry air flows through two alternating desiccant containers, where it is re-dried. This creates ultra-dry air with a dew point of approx. -35 °C. Itedpsyxay Ijfx Acfei Dry air dryer: KKT 100S Dry air flow rate: 100 m³/h Desiccant containers: both NEW Container volume: 200 liters Mobile design Convenient touchscreen menu navigation Conveying unit: TYPE 608 Number of material types: 1 Blower: 1.1 kW Capacity: 8.5 liters Voltage: 230/50

Year of construction: 2018, condition: ready for operation (used), The dry air dryer from Digicolor is available for sale; the granulate dryer operates using the dry air drying principle. Itjdeywh E Aspfx Acfei 40-liter capacity on a mobile frame Compact dryer footprint Simple setup and operation Consistent dry air dew point Optimization of all drying parameters Energy-efficient drying technology No compressed air or cooling water required Dust-free dry air through adsorption rotor technology Antistress function, SmartMode, no overdrying of plastic granulate