Used Gear testing machines for sale (6)

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, Klingelnberg ZW 301 Gear Measuring Machine with Evaluation Computer Double-flank gear measuring machine with 4-position indexing table - Spur gear - Internal gear - Gear shaft - Computer (evaluation via industrial PC with fully automatic parameter calculation, quality determination, and classification) Workpiece data: Table load including fixture, max. 100 kg Load on support plate/vertical slide including fixture, max. 80 kg Workpiece knife with counterholder on measuring and feed slide, max. 300 mm Workpiece knife with counterholder on machine bed, max. 300 mm Cebjv Ic R Ao Em I S Ujgt Device data: Heidenhain LIF 101 position measuring system Center distance min./max. 45/300 mm Table diameter 150 mm Table height above floor 950 mm Measuring pressure min./max. 5/30 daN Total connected load of the test device: 0.75 kVA Total space requirement: LxWxH 1900 x 1200 x 2200 mm Net weight: 750 kg PC, as well as some master wheels with common modules. Weight: 750 kg

Condition: used, max. wheel diameter 0 mm gear width 0 mm max. module 40 min. module 1 weight of the machine ca. 0,05 t dimensions of the machine ca. 0,5x0,3x0,3 m Csb Em I Sovn Unye Uogt pitch and run-out tester unit for gear measuring machines.

Condition: used, Year of construction: 2000, Technical details: length: 700-1.100 mm diameter: 40-160 mm dimensions of the machine ca.: 1,7 x 0,9 x 2,2 m Automatic shaft measuring device for measuring: Cgeb Eorp Nupjm I S Uot Lengths, diameters, distances, chain dimensions, groove widths, groove diameters, angles, concentricity, etc. *

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle Cgob Em I Sjrtrzdj Uet (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg Cjb Emsqvcnnj I S Uogt speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *

Condition: good (used), Year of construction: 2013, 2013 Gleason 175GMM Gear Inspection System Equipped with: Windows 7 Upgrade 2016 New Computer Upgrade 2016 GAMA Software Update 2016 Cgjb Em I Ssrtryrs Ujt New Rotary Table Installed 2018 Specifications: Nominal Workpiece Diameter: 175 mm Module Range: 0.4-6.35 Center Distance: 380 mm