Used Fliegl Zts 200 P for sale (52,193)

Condition: used, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Additional information Chassis: Steel welded construction, double-curved with a low-bed section in front of and behind the axle unit, the low-bed section is angled for easier access, turntable with robust ball bearing race, foldable rear support, chocks, side impact protection, quarter-panel fenders Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed section / rear axle: 6 pairs of lashing points on the side in the low-bed section, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of pocket recesses embedded in the outer frame, internally 70 x 40 mm, or instead of pocket recesses, 5-ton ring lashing points embedded in the floor Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front Electrical system: 24 volts, multi-chamber lights, yellow side lighting, 2 white position lights at the front 2 white/red outline marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable connectors at the front Floor: curved section at the front with steel/diamond-plate covering, storage compartment embedded in the access ramp to the curved section, driving lane area and in the center between the beams with steel/diamond-plate covering, rear slope with 70 mm softwood floor, low-bed platform including rear slope 5900 mm Ramps: mounting rail for aluminum ramps over the entire width, as a U-profile over the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg Podpfx Aoi Ri N Ujm Tjgp Storage compartment for ramps between the beams Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 11,400 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Pgedoi Ri N Aopfx Am Tep Further information Chassis Steel welded construction, with slight preload in the center, turntable with robust ball bearing race, support wedges with holder, quarter-shell fenders in front of and behind each axle. Tie-down points, low-bed trailer: above the front axle: 2 pairs of ring tie-down points, each 5 tons, at the front on the outrigger low-bed: 4 pairs of tie-down points, each 6 tons, on the sides in the low-bed 5 pairs of tie-down points, each 5 tons, between the longitudinal beams Tow hitch, trailer turntable Tow fork with tested 40 mm drawbar eye, mechanically adjustable in length by 6 x 100 mm and lockable (Tow fork length 1,700 - 2,300 mm) Axles + Suspension BPW drum brake axles, each 10 tons axle load, spring plates. Axle endurance brake test for 105 km/h, rear axle can be manually removed. Air suspension with raising & lowering valve Wheels and Tires 235 / 75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, with connecting lines to the towing vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, rotating beacon with holder, switched via parking lights (light can be removed), 2 pairs of warning signs, double LED illuminated and extendable to 3,300 mm, removable with plug, 2 x 7-pole tamper-proof plugs at the front, with connecting cable, 1 x 7-pole agricultural plug, voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Steel/diamond plate floor on the outrigger, perforated sheet covering between the longitudinal and transverse beams. Axle cover is not designed to be driven over, widening to 3,000 or 3,300 mm is possible. Operating instructions Note! A special permit is required for a 10,000 kg axle load. The permit must be applied for separately in each federal state; the legislator does not have to give a guarantee for 20 tons GVW. Customer risk. A special permit is required if the overall length of the train exceeds 18,750 mm. Observe country-specific registration regulations. The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Observe the BO circle!!! Registration / Signs Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, warning sign according to ECE - 70, contour marking with reflective strips according to ECE R 048 Painting Frame at the front hot-dip galvanized incl. passivation, frame at the rear RAL 9006 silver, tow fork KTL black Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space width: 2,520 mm, loading space height: 380 mm, total length: 12,000 mm, total width: 2,550 mm, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Steel welded construction Turntable with robust ball bearing race, storage box recessed in the turntable extension Foldable rear support Chocks with holder Aluminum side impact protection Splash guard at the rear over the entire width Quarter panel fenders in front of the 1st axle Spare wheel holder for 1 spare wheel, with wheel fastening kit Spare wheel, same brand as the standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Tie-down points for low-loader 3 pairs of tie-down points, 10 tons each, integrated in the floor at the front 6 pairs of tie-down eyes recessed in the upper and side parts of the outer frame, 10 tons each 1 x at the neck area, the rest spaced out with a maximum distance of 1200 mm 1 x rear slope 5 pairs of ring tie-down points recessed in the outer frame, 5 tons each (can be converted to stake pockets) Coupling device, trailer, turntable Drawbar with tested 40 mm drawbar eye Axles and Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Wheels and Tires 235 / 75 R 17,5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Voltage converter for 12/24 Volt operation Note! A 7-pin socket, 12 Volt, is required on the tractor/tow vehicle! (Required in conjunction with the voltage converter for electrical system!) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white/red position lights at the rear 2 white position lights at the front Additional LED work lights at the rear, switched on via reversing light 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 x 7-pin agricultural plug Voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Front area: steel floor Then with 70 mm softwood floor, steel/non-slip sheet metal covering in the wheel arch area Rear slope with 70 mm softwood floor Low-loader platform including rear slope 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Covered with wood With spring-assisted support Podpfx Asi Ri Nxom Togp Operating Instructions A special permit is required for an axle load of 10,000 kg. The permit must be applied for separately in each federal state; a guarantee for a 20-ton gross vehicle weight must not be given by the legislator. Customer risk. Country of Registration / Signs Country of registration: Germany With DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 Service Hotline Prepared for license plate holder, two-line Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau 10-year warranty against rust Drawbar galvanized or black, according to manufacturer's choice Loading ramps hot-dip galvanized Note: Archive images!

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,997 kg, first registration: 05/2016, loading space length: 6,900 mm, loading space width: 2,480 mm, color: red, Year of construction: 2016, Axle brand: BPW 10-ton drum axle Front axle: Max. axle load: 10,000 kg; Steerable Pedjziz Dtspfx Am Tsgp Maximum rear axle load: 9,997 kg Unladen weight: 3,880 kg Payload: 16,200 kg GVWR: 20,000 kg Loading platform height: 112 cm Technical condition: good Optical condition: good

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,840 kg, maximum load weight: 16,160 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,975 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Combination Trailer for Roll-Off Containers Pedszhfz Tepfx Am Tegp * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Low-tension locking system with a clamping force of 6 tonnes per locking claw * The original system – proven for more than 30 years * Adjustable and removable longitudinal guide rails, approx. 115 mm high * Heavy-duty turntable with ball-bearing slewing ring * Recessed mushroom lashing points on the top and sides of the outer frame, each rated at 5 tonnes * Combination stake pockets with bolted lashing rings integrated into the outer frame, each rated at 5 tonnes (internal dimensions approx. 72 × 42 mm) * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Four quarter mudguards * Lockable plastic toolbox (600 × 425 × 460 mm) * Open storage box for container safety net ### Drawbar * Drawbar with certified 40 mm towing eye * Pneumatically assisted height-adjustable Y-type drawbar (raise/lower function) ### Axles & Suspension * Drum brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * External grease points for easier axle maintenance * Air suspension with raise-and-lower valve * Air suspension pressure gauge (air spring pressure indicator) ### Wheels & Tyres * 235/75 R 17.5 tyres * Manufacturer's choice * Twin steel wheels, factory silver finish * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via the towing vehicle's EBS system (no additional truck installation required) ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Axle load detection via EBS CAN bus for display in the driver's cab * Electronic Vehicle Stability Control System * Duomatic air coupling at the front with connecting line to the towing vehicle * 24 V EBS (Electronic Braking System) with front EBS connector and connecting cable ### Electrical System * 24 V electrical system * LED multi-chamber rear lights * LED licence plate lighting * Yellow LED side marker lights * Flashing LED side marker lights linked to the turn indicators * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front connector with connecting cable * Parking holders for electrical, air and EBS connections on the drawbar * Additional rear LED work light activated via reverse gear * Removable LED rotating beacon with holder, activated via the parking lights * LED work lights on both sides, activated via reverse gear ### Loading Platform * Steel floor * Recessed front roller channel for roll-off containers * Suitable for roll-off containers from 5,000 mm to 7,000 mm in length ### Loading Ramps * Lockable storage compartment for loading ramps beneath the loading platform * 1 pair of aluminium loading ramps, approx. 3,000 mm long and 450 mm wide * Load capacity: 14,000 kg per pair ### Registration & Signage * Foldable "A" warning sign for waste transport * Rear parking board ### Surface Protection & Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements

Condition: used, overall weight: 18,000 kg, first registration: 09/2019, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, - Twin tyres - Mega, - 3 m internal height - side loading Pjdpfx Amexxxlto Togp

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 24,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,290 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs Wheel chocks with holders Full-width rear mudflap 1 plastic toolbox Preparation for extensions to 3,000 mm (holes in outer frame with covers, not in rear bevel) #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members Pjdpfeznyrmsx Am Tegp 7 pairs of recessed 10 t lashing points in top and side outer frame 1 on front gooseneck 5 in low bed 1 in rear bevel 12 pairs of 5 t lashing holes in outer frame (for load straps) 5 on gooseneck, 6 in low bed and 1 in rear bevel #Drawbar Equipment Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R17.5 Manufacturer's choice Twin steel wheels, factory silver #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads with connecting lines to towing vehicle Connecting lines extended by approx. 60 cm Without ABS, with mechanical ALB, max. 60 km/h approval #Electrical System 12 V multi-chamber lights, without yellow side LED lights, with side reflectors 2 front white position lights 2 rear white/red outline marker lights 1 x 7-pin 12 V front plug with connecting cable, extended by approx. 60 cm 1 removable LED beacon with bracket, switched via side lights #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 5,900 mm #Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Registration / Plates Registration country: Germany With DEKRA inspection and approval report for max. 60 km/h registration, agricultural towing vehicle Prepared for two-line number plate holder Without contour marking / reflective strips according to ECE R 048 #Paint Finish Chassis hot-dip galvanised incl. passivation "15 Jahre Gewährleistung gegen Durchrostung" Drawbar galvanised or black, manufacturer's choice Loading ramps hot-dip galvanised

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 9,900 kg, maximum load weight: 14,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction Turntable with robust ball bearing, storage box recessed Turntable extension Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear across the entire width Extendable wideners to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-loader type 3 pairs of tie-down points, each rated at 10 tons, integrated in the front of the floor 6 pairs of tie-down anchor plates, top and side in the outer frame, each rated at 10 tons 1 x in the neck area the rest distributed in between with a maximum distance of 1200 mm 1 x rear slope 5 pairs of pocket slots recessed in the outer frame, inside 70 x 40 mm, (can be converted to 5-ton ring tie-down eyes, not included in the scope of supply) Towing device, turntable trailer Tow bar with tested 40 mm towing eye Note! With a 40 mm towing eye, the permissible total weight of the truck must not exceed 18000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Axle / chassis laser-aligned, reducing tire wear and fuel consumption Pgjdpsi Ri I Eofx Am Tjp Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization in the front and rear (rocker equalization) Wheels & Tires 235 / 75 R 17.5, according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (beacon can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area: steel floor followed by 70 mm softwood floor, steel / diamond plate in the wheel arch area Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2800 mm long, 750 mm wide, laterally movable covered with wood with gas spring support Operating Instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle / support and saddle loads. Country of Registration / Signs Country of Registration: Germany 1 with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame: RAL 3002 Carmine Red 10-year warranty against rust-through Tow bar: galv

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P • Intake nozzle diameter: 200 mm Pedpfxsbpg Ncs Am Tegp • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. volume flow: 3010 m³/h • Rated volume flow: 2262 m³/h • Vacuum: 2174 Pa • Filter area: 13.7 m² • Filter cleaning: Compressed air cleaning • 2 collection containers (rolling containers): a. 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 • Weight: 320 kg • Design / operating side can be selected: right / left Location: In stock at Bitburg Top price for the showroom model

Condition: good (used), Reflective light barrier, light barrier, reflective light switch -Number: 2 buttons available -Price: per piece Pgsdscqp Hljpfx Am Tjp -Weight: 0.05 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Simplex, hydraulic pump hand pump two-stage pump Pgjdpfxowwq Exs Am Top -Type: P- unfortunately no exact type designation -Pressure range: max. 10000 PSI 689 bar -Tank capacity: l -Quantity: 1x hand pump available -Dimensions: 740/200/H150 mm -Weight: 8.7 kg

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. Psdpfxeyuw Srj Am Tjgp MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 2006, total height: 5,000 mm, total length: 7,500 mm, total width: 6,000 mm, overall weight: 45,000 kg, Machine No.: 10990003463Control SystemHeidenhain iTNC 530 (3D path control)Travel PathsX: 1,850 mmY: 2,000 mmZ: 1,100 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 1,700 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 25–12,000 rpmPower: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Torque: 288 / 187 NmTool holder: SK50 according to DIN 69871Tool Changer60-slot tool magazineDouble gripperEquipmentIKZ 40 barChip conveyorTool measurement system Blum Laser NT HybridHeidenhain TS 640 infrared probeElectronic handwheelMinimum quantity lubrication (MQL)Oil/emulsion mist separatorCoolant through spindleCoolant tank 980 lATC (Application Tuning Cycle)Laminated safety glass windowOperating mode 4 (process observation) Travel Y-axis: 1800 - mm Weight approx.: 45,000 kg Travel Z-axis: 1170 - mm Travel X-axis: 2000 - mm Dimensions (LxWxH) approx.: 7500 x 6000 x 5000 mm Year of construction: 2,006 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No Pgodpjzm Dw Refx Am Tjp

Condition: new, Year of construction: 2022, heating capacity: 200 kW (271.92 HP), new heating system, manufactured in 2022, never put into operation heating capacity: 60 - 200 kW Pjdpfx Aezmp Rvsm Tegp container: 20 ft an approximately 5-year-old air distribution system is included, but not mounted.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 5 Hz, DGUV certified until: 08/2027, type of input current: three-phase, year of last overhaul: 2025, Hydraulic Dough Divider Panirecord automatic dough dividing and shaping Space-saving Versatile in use Pjdey Ik A Sjpfx Am Tegp Capacity: 900 to 1250 pieces/hour Connection: 400V, 16A-CEE plug Used machine You will find many more bakery machines in our large showroom!

Condition: good (used), Year of construction: 2002, Universal machining center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year: 2002 SPECIFICATIONS Travel X-Axis: 1.800 mm Y-Axis: 2.000 mm Z-Axis: 1.100 mm B-Axes: 0,001° C-Axis: 0,001° Amount of controlled axes: 5 Spindle speeds: 20 - 10.000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool: SK 50 Toolchanger Tool capacity: 60 NC rotary table Table size: 1.700 x 1.400 mm Max. Table Load: 5.000 kg Equipment Chip conveyor Internal cooling: 40 bar Caliper Electronical handwheel Oil mist separator Tool measurement: Blum Laser Psdpezizanefx Am Tsgp Attachment spindle, 42,000 rpm, HSK 32 (optional)

Condition: new, Year of construction: 2025, Suction nozzle diameter: 200 mm Maximum flow rate: 3200 m³/h Nominal flow rate: 2262 m³/h Flow rate monitoring: Pressure differential indicator Pgjdpfx Amjv Sq Tto Tsp Valve pressure: 2250 pa Filter area: 16 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 65 dB Chip bag volume: 320 l Filter cleaning: pneumatic, jet cleaning Motor power: 4 kW Machine length: 2340 mm Machine width: 880 mm Machine height: 2190 mm Weight: 385 kg

Condition: used, functionality: fully functional, machine/vehicle number: 2477688, mileage: 22,000 km, power: 96 kW (130.52 HP), first registration: 01/2020, fuel type: diesel, overall weight: 3,500 kg, tire condition: 85 %, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, Year of construction: 2020, Equipment: ABS, UVV, Year of manufacture: 2020 Chassis: Nissan Max. working height: 19.80 m Max. platform height: 17.80 m Max. lateral reach: 10.60 m Tilt angle of telescopic boom: -21° to +80° Slewing range of turntable: 370° Rotation angle of platform: 2 x 90° Max. platform load: 250 kg Dimensions of work platform (L x W x H): 1.40 m x 0.85 m x 1.10 m Length in transport position: 7.10 m Width in transport position: 2.10 m Height in transport position: 2.87 m Pgjdpszgbrxjfx Am Tjp Weight: 3.5 t Fully functional, technically inspected.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1896.69 € 200 x 32 x 32 mm Pgodey Ig N Iopfx Am Tjp 1 kW 2550 1/min 42 mm 270 mm 470 mm 1050 mm 600x800x1350 mm 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation .: 317.774with machine stand, emergency stop pushbutton and brake OPTION (price on request): Footpedal as emergency stop ALTERNATIV MODELS: .: 317.762 table version .: 317.777 with machine stand with integrated suction, emergency stop pushbutton and brake

Condition: new, Year of construction: 2026, Description Double-sided grinding machine TS 200 SD P with extraction system, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Extraction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 Pgodpfor Eqzfox Am Top - Machine dimensions without packaging (mm): 250 x 470 - Speed (rpm): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, overall weight: 155 kg, volume flow: 200 m³/h, final pressure: 0 bar, type of cooling: air, warranty duration: 6 months, Factory-refurbished 1-stage SV200 vacuum pump, with a full six-month warranty (with proper operation). There are 3 pumps available and ready for sale. The pictures have taken one of the pump, but the others look the same. Upon request, we will also send a measurement report on the operation of the pump. We attached the user manuals, so you can check all neccessary informations. Pgedpfjzfh Dxex Am Tep

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 956.67 € 200 x 32 x 32 mm 1 kW 2800 1/min Psdpfsy H N Azex Am Tegp 42 mm 250 mm 470 mm 230 mm 325 x 540 x 310 mm Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation .: 317.762 table version ALTERNATIVE VERSIONS: .: 317.774with machine stand, emergency stop buttom and brake .: 317.777 with MA400D integrated extractor, machine stand, emergency stop buttom and brake

Condition: new, Year of construction: 2025, neu 2025 050141 prompt, Zwischenverkauf v Polen 2821.24 € 1 200 x 32 x 32 mm 1 kW 2800 1/min 42 mm 470 mm Pjdpfsyrhqyjx Am Tegp 250 mm 1050 mm 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVES: Version without suction (Art. 317.762) Version without stand, suction and brake/emergancy push button (Art. 317.774)

Year of construction: 1979, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: Si3,2t, Demag rope hoist crane hoist 3200Kg P616H13 Payload 3200KG / 3,2t payload / lifting capacity - 2-fall Lifting height approx. 8m Weight complete approx. 350 kg, connection to 400V 50Hz Mint condition, completely overhauled by Erich Schäfer Item location is 75053 Gondelsheim Pgedpfx Amoupwpro Tsp See pictures

Condition: used, maximum load weight: 7,130 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 02/2013, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, Equipment: ABS, * Fliegl 2-axle tandem trailer with tarpaulin and bows Pgodpfx Aszp Tqljm Top * Type TPS 100 * BPW axles * Air suspension * Leveling system * Edscha cover * Height-adjustable/extendable drawbar * Galvanized frame * ABS * EBS