Used Four-Side-Pointing Machine Automatically for sale (86,348)

Condition: new, Year of construction: 2026, Simply top - and practically as if by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Simply point - and practically by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. Ijdpfehm S Rujx Ab Ajid This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Condition: used, Year of construction: 1969, Used machine Year of manufacture: 1969 Runs perfectly Max. working width: 170 mm Max. working height: 130 mm 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right Isdpjxavtqefx Ab Asid 5th shaft: top Availability: short-term Storage location: Röllbach

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 96123, Rated voltage 380V, 46A Planing width 180 mm Isdpfjh U Db Isx Ab Asid Planing height 120 mm Length of infeed table 2300 mm 4x Leitz reversible cutterheads, each with 4 knives 2x feed speeds Electric height adjustment 4x star-delta switches 2x low-pressure rollers 1x side pressure roller 2x steel infeed rollers 1x rubber-coated outfeed roller Dust extraction connection 4x120 mm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: snr: 1015, number of cylinders: 2, drive type: Servo Siemens, number of previous owners: 1, input voltage: 400 V, input frequency: 50 Hz, number of print heads: 1, air pressure: 6 bar, control voltage: 24 V, nominal power (apparent): 15 kVA, sieve area: 260,000 mm², sieve perforation: 10 mm, space requirement height: 3,500 mm, space requirement length: 8,000 mm, space requirement width: 2,000 mm, year of last overhaul: 2025, control type: PLC-controlled, number of digital displays: 1, production capacity: 9,000 unit/h, Equipment: CE marking, cooling unit, emergency stop, type plate available, Fully functional sachet machine for solids, recently taken out of production due to a change to a different packaging format. The machine produces four-sided sealed sachets from paper-foil with a PE layer. Standard sachet size: 70 x 150 mm external dimensions, with a usable internal volume of approximately 25 to 30 ml. The hanging hole with tear-off feature, in the reinforced top part, can be disabled if desired. The machine includes, among other things: * Automatic film tension and film alignment system; Isdpfxjzgv Dve Ab Ajid * Videojet inkjet printer, Meler hotmelt unit; Cooling unit, chip extraction system; * Siemens control and servo, Festo pneumatics; * Reinforced hanging edge through multilayered film fold and hotmelt adhesive; * Integrated punching functions for hanging hole, tear-off feature, and alignment mark (can be disabled); * Carousel system for opening, inspection, dosing, sealing, and ejection; * Automatic box selector; * Vibrating screen, infeed conveyor, hopper, and volumetric dosing system. The machine has always been well maintained and recently underwent an overhaul in which both the servomotor and the associated drive were replaced. Annual maintenance was consistently performed. The machine can be demonstrated in working order. Includes cabinet with spare parts, printed Dutch and German manuals, parts drawings, electrical diagram, and documentation on CD. Terms of sale: The machine is sold EXW (Incoterms® 2020) at the seller's location. Dismantling, internal transport, loading, transport, unloading, and reinstallation are entirely at the buyer's expense, risk, and responsibility. Technical support during dismantling and internal transport can be provided, but it is purely advisory and does not imply any liability on the part of the seller. Additional information or a demonstration can be provided upon request.

Condition: used, Year of construction: 1985, Working width: 180 mm Working height: 120 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power, bottom spindle: 3.7 kW Motor power, right spindle: 3.7 kW Motor power, left spindle: 3.7 kW Motor power, top spindle: 5.5 kW Adjustment, bottom spindle: - Adjustment, right spindle: - Adjustment, left spindle: handwheel Adjustment, top spindle: electric Planer heads: reversible knives Feed rate: 2 Feed roller pressure: spring-loaded Power consumption: 38 A Motor brake: automatic Dust extraction connection: Machine length: Isdpfxozdzbnj Ab Aeid Machine width: Weight:

Condition: used, Year of construction: 1980, No. 3192 Isdpovkhccofx Ab Asid Four-sided planing machine WEINIG U 17 A Used, year of construction 1980, machine available from February 2025 Machine still in operation 6 spindles Arrangement of spindles bottom - right - left - top - bottom - bottom Working width 170 mm (with a tool flight circle of 125 mm) Working height 120 mm (with a tool flight circle of 125 mm) Joining spindle 4 HP All other spindles 5.5 HP Feed 2 or 3 HP Speed of the work spindles 6000 rpm Work spindles Ø 40 mm Smallest flying circle Ø of the moulder spindles 100 mm Largest flying circle Ø of the moulder spindles 180 mm Continuous feed, infinitely variable 6 - 18 m/min Transport roller Ø (hardened) 140 mm Transport roller width 50 mm Adjustment range of feed table and joining ruler right 10 mm Adjustment range of vertical spindles under table 40 mm Adjustment range of the horizontal spindles (axial) 30 mm Dressing table length 2 m Sale on behalf of customer, ex location Upper Austria, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 8 Spindle arrangement: bottom, right, left, top, bottom, top, right, left Dust extraction nozzle diameter: 6 x 120 mm Infinitely variable feed rate adjustment: 4-24 m/min Iijdpjzgut Nsfx Ab Aod Feed via universal joints Power supply: 400 V Total power: 17 kW Overall dimensions: Length: 3050 mm Width: 1200 mm Height: 1200 mm

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 7 Spindle arrangement: bottom, right, left, top, bottom, top, left Diameter of the dust extraction port: 7x120 mm Adjustable feed rate: 4-24 m/min Feed via universal joints Power supply: 400 V Iijdpfx Abozgup Rs Asd Total power: 17 kW Overall dimensions: Length: 2550 mm Width: 1050 mm Height: 1200 mm

Condition: new, grinding height: 150 mm, height adjustment type: mechanical, total height: 1,450 mm, total length: 1,800 mm, total width: 1,400 mm, overall weight: 850 kg, Equipment: CE marking, Structuring and Sanding Machine / 4-Side Brushing Machine Manufacturer: Alpha Brush Model: LS-TSB Versatile brush sanding machine equipped with a total of 6 brush units for 4-sided sanding and structuring of wood materials such as panels, solid wood flooring, scaffolding boards, facade boards, etc. Working width: 300 mm Workpiece height clearance: 150 mm Equipped with: - 1x top brush unit, 2.2 kW Isdpfoykh Tfox Ab Aeid - 1x bottom brush unit, 2.2 kW - 1x top brush unit, 2.2 kW - 1x bottom brush unit, 2.2 kW - 1x left-side brush unit, 1.1 kW - 1x right-side brush unit, 1.1 kW Infinitely variable speed control for each brush group (top, bottom, sides) Brush diameter: 260 - 300 mm Quick-change system for brush heads Spring-mounted pressure roller, individually height adjustable Feed rate infinitely variable, approx. 2 - 20 m/min., 0.75 kW Digital display for settings Recommended extraction capacity: 3000-3500 m³/h Voltage: 400 - 480 V, 3 Ph, 50/60 Hz Protection: 32 A Dimensions (LxWxH): approx. 1800 x 1400 x 1450 mm Weight: approx. 850 kg

Year of construction: 1988, condition: like new (used), Location Kłodawa 66-415 Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Four-sided planer, banding machine, Gabbiani spichetting machine Max planing width: 160 mm Max planing height: 100 mm Iiodpfx Abedx Elmj Asd Min. Element length: 180 mm Spindle diameter: 30 mm Number of spindles: 6 Spindle order: down rights, left, Mountain, Mountain bottom Crawler feed: top, bottom Smooth infeed adjustment: 4 - 34 m / min It is possible to work feed at an angle of: 0 ° - 30 ° Feed on cardanach Manual spindle height adjustment Adjustable heads in all directions Automatic lubrication of the track All bearings replaced with Teflon Machine after a full review The machine is adapted to the production of parquet and slats Dust Extractors: 6 x 120 mm Power supply: 400 V Total power: 26.2 kW Dimension of the machine Length: 4060 mm Width: 1500 mm Height: 1200 mm important: planed tables in the whole machine and leveling, setting angles and

Condition: excellent (used), functionality: fully functional, FOUR SIDE PLANER machine model FUTURA MODUL 4 220 second hand machine working conditions : excellent n.4 spindles ( n.4 indipendent motors ) CE mark : YES volt. 380/50 with tools : Yes . n.04 tools with interchangeable knives composition machine ( 4 spindles , 4 indipendent motors ) : 1° spindle : planer . motor power Hp 5,5 (Kw 4) 2° spindle : vertical right . motor power Hp 4 (Kw 3) 3° spindle : vertical left . motor power Hp 4 (Kw 3) 4° spindle : thickness planer . motor power Hp 5,5 (Kw 4) technical details : 2 speed feed . motor power Hp 1,3 / 1,7 (Kw 1 / 1,3) spindle rotation speed rpm 6000 feed speed : 8 / 16 mt./min max. useful working width mm. 220 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2300 Iiedew Dz T Hepfx Ab Aod lubrication system electric height adjustment . motor power Hp 0,25 (kw 0,2) total installed power: 18.6 HP (14 kW) instruction manual CE certification

Condition: excellent (used), Year of construction: 2010, I sell the automatic drilling machine KUSING. Working width up to 1200mm Magazine for elements Ijdpfx Abst I U E Ij Aoid Configuration: 1+1 motors from sides Atypic 2-spindle drilling heads included 2 x 32mm. Drilling heads in price. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 106531, working width: 230 mm, power: 75 kW (101.97 HP), input current: 163 A, table width: 230 mm, Equipment: cabin, Rarity! Four-side planer Weinig Powermat 500 with splitting unit!! (the last two spindles fitted with saw blades, anti-kickback device, splitter wedge) for sale complete with all accessories. Isdpfxoyyw Ufo Ab Asid The machine has 7 spindles/shafts (bottom / right / left / top / bottom / right / left). We used the line to produce middle layers for three-layer board manufacturing. The machine is in perfect working order. The machine is still in operation and can be demonstrated. Further technical details will follow in the next few days...

Year of construction: 2026, condition: new, This 4-side -pointer was designed mainly for small and medium quantities with manual feeding. The machine has the following performance. As a drive type for the hydraulic pump, the machine is optionally supplied with a 7.5 kW electric motor or with connection for a cardan shaft. Sometimes it can be very simple: the mechanical sharpening machine has been specially designed for fast and practical feeding under manual feeding. It is therefore perfect for producing small and medium quantities of fence elements, wooden posts and palisades. Ideal for flexible landscaping or hastily planned timber construction. It can process any type of milled and peeled wood. Even curved weak wood, or logs with bark are no problem for the sharp knives. Maximum log diameter 270 mm Shortest lenght of log 1,15 m 5 pointing angles adjustable For rounded, peeled and unmachined logs Iiodpfx Ajfw A D Njb Ajd Capacity 150 to 250 poles/houre Cylinder force 2 x 10 to Oilpressure 200 bar Power unit Electro motor 7,5 kW PTO drive Tractor pump

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Iisdsy Uiyvjpfx Ab Aod Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, Year of construction: 2006, total width: 4,210 mm, total height: 1,830 mm, Colour: Blue Empty weight: 10 kg Dimensions (LxBxH): 190 x 421 x 183 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107707 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 4: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 5: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 6: - - Spindle type: Horizontal spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 1800 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 4 - System/software: Memory System - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 130 - Options: Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 4 - └ Max. feed speed [m/min]: 30 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 78 - Fuse [A]: 80 - Power [kW]: 36.0 Iiedpfszl Tvaex Ab Ajd - Transport dimensions: 1900mm x 4210mm x 1830mm (l x w x h) - Transport weight [kg]: 10kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, total width: 4,600 mm, total height: 1,830 mm, Dimensions (LxBxH): 217 x 460 x 183 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 - Feed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Conveyor drive: Cardan drive Iiodjwnig Nopfx Ab Ajd - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total width: 2,000 mm, total height: 1,800 mm, Colour: Grey Empty weight: 5.000 kg Dimensions (LxBxH): 450 x 200 x 180 cm Four-sided planer Weinig Unimat 23 Year of construction 1998 Serial number 82747 Feed speed 5/36 m/min Iiodewnh D Tjpfx Ab Asd Workpiece width min/max 20/230mm Workpiece height min/max 8/160mm Spindle diameter 40mm Half Groove Bed 1st spindle bottom: 7.5kW 2nd spindle right: 7.5kW 3rd spindle left: 7.5kW 4th spindle top: 7.5kW 5. Spindle bottom: 7.5kW 6. Spindle universal: 11kW Total power 55kW Total 119Amp Fuse 125Amp. Transport dimensions: 4500x2000x1800 (LxWxH) weight +/- 5000kg - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: 82747 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - └ Spindle 6: - - Spindle type: Universal - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - Min. planing width [mm]: 20 - Max. planing width [mm]: 230 - Min. planing height [mm]: 8 - Max. planing height [mm]: 160 - Feed speed: - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 36 - Current consumption [A]: 119 - Fuse [A]: 125 - Power [kW]: 55.0 - Transport dimensions: 4500mm x 2000mm x 1800mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder. Ijdpjydnxnsfx Ab Aoid

Condition: used, functionality: fully functional, Year of construction: 1996, load capacity: 3,300 kg, lifting height: 6,200 mm, free lift: 2,180 mm, fuel type: electric, mast type: triplex, construction height: 2,950 mm, fork carriage width: 1,520 mm, fork length: 970 mm, total length: 3,250 mm, drive type: Elektro, construction width: 1,850 mm, Four-way side loader Load center: 400 Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable terms are always possible for us. We are also happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed information about this EVS35-33/10-08/63TRDK7.5. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We will also gladly offer your vehicle for consignment sale at our premises. Ijdpfozmklbex Ab Aeid Fork positioner, Full free lift.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,071 h, load capacity: 2,500 kg, lifting height: 5,600 mm, fuel type: electric, mast type: simplex, construction height: 3,510 mm, fork carriage width: 1,520 mm, fork length: 770 mm, empty load weight: 7,100 kg, total length: 3,350 mm, drive type: Elektro, construction width: 2,150 mm, Four-way side loader Load center: 530 Fork width: 150 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Battery capacity: 775Ah Battery year: 2023 Description: In addition to this Votex - Bison model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always available. We are also pleased to purchase your used equipment, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice about this compact model. Ijdpfx Ajyvwczjb Aeid P.S.: Our master forklift workshop is specialized in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons onwards. We can also consign your vehicle for sale at our facility. Platform height: 380 mm

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 9,984 h, load capacity: 5,500 kg, lifting height: 6,540 mm, free lift: 2,280 mm, fuel type: electric, mast type: triplex, construction height: 3,420 mm, fork carriage width: 3,460 mm, fork length: 1,800 mm, empty load weight: 10,776 kg, total length: 3,300 mm, drive type: Elektro, construction width: 2,940 mm, Four-way side loader Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Battery voltage: 80V Battery capacity: 775Ah Battery year: 2021 Description: In addition to this Hubtex model, we currently have around 200 heavy-duty forklifts, compact forklifts, standard forklifts & side loaders available in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing at attractive rates are always possible. We are also happy to purchase your used machines outright, even if you do not buy a unit from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail regarding this MQ55. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom construction for forklifts from 8 tons upwards. We are also happy to consign your vehicle for sale in our facility. Fork positioner, Fork positioner opening range: 560 / 3,460 mm Full free lift, Isdpfx Abey Sqcto Ajid Platform height: 410 mm

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Iedpoq Atyzefx Ab Aoid Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Measured at the operator's workplace Including the two roller conveyors shown.

Condition: used, machine/vehicle number: 008687, Max. panel width: 1000 mm Max. panel length: 2500 mm Ijdpfxjzmmt Ij Ab Ajid No of Bottom Units: 8 Lateral horizontal groups: yes

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,601 h, load capacity: 4,500 kg, lifting height: 4,500 mm, free lift: 2,283 mm, fuel type: diesel, mast type: duplex, construction height: 3,300 mm, fork carriage width: 1,250 mm, fork length: 1,400 mm, empty load weight: 6,640 kg, total length: 2,190 mm, drive type: Diesel, construction width: 2,570 mm, Four-way side loader Load center: 600 Fork width: 180 mm Iodszk R Hgepfx Ab Aeid Fork thickness: 50 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this Hubtex model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options at favorable terms are available from us at any time. We also gladly purchase your used vehicles, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DQX45-D. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Fork adjustment device, Fork adjustment device adjustment range: 500 / 1,250 mm Heater, full cab, full free lift