Four-sided planer, banding machine, Gabb

Gabbiani GS 160/10

Year of construction: 1998, condition: excellent (used), functionality: fully functional, machine/vehicle number: 389101016885, Bulgarian forklift from Balkancar .Capacity 3.5 tons disel drive ..Year of production 1989 ..Unladen weight 4800 kg. Lifting height 3300 mm... Torque 79/27,5 kN. Serviced .Very good condition .Trolley operational ready to use .Net price vat invoice. Cart with access to spare parts . Kedpfx Ajtz Td Aoh Eedw

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Ksdpfjp R Sdhsx Ah Esdw Software Rear Lifting table No. 1 Rear pushers Twin Pusher No. 9 clamps Max. cutting width (mm) 3300 Useful stroke of the pushing system (mm) 3300 Max blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 360 mm - Kw 18 Adjustable speed of the saw carriage (m/min) 5 - 120 Front supporting tables with Air blowing system (N.) 3 Total power (Kw) 21 (ca.)

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction Kdsdpfxsqy E Rlo Ah Eew spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Year of construction: 2012, condition: used, pasteurizer with pipe heat exchanger 600 l/h (up to 80°C) with automatic control storage tank for BiB with level control Kdedpfx As Hnnhoh Esw BaginBox filler with flow meter oil boiler 50kW mounted on braked trailer with tarpaulin max. weight: 1350 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cut saw line with 1 x OptiCut 450 and F 100 feeding system with LuxScan CombiScan+ C 200 and curvature measurement Kodpfxowya Syj Ah Esdw The line was in operation until 2024, has been professionally dismantled and can be viewed.

Condition: good (used), Gabbiani SA 300 multi-saw - Italian production TECHNICAL SPECIFICATIONS: cutting width 300 mm engine power 40 kW Kedehcwrkopfx Ah Eedw cutting height 100 mm smoothly adjustable feed feed speed range 8-56 m / min blade diameter 300 mm spindle diameter 50 mm sleeve diameter 70 mm 3 upper pressure rollers minimum material length 700 mm table top dimensions 1750 x 700 mm three rows of pawls height from the base 740 mm stub diameter 2 x 150 mm dimensions (length / width / height) 270/170/160 cm

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Kjdpfxeu Uh T Ds Ah Eedw Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Year of construction: 2005, condition: ready for operation (used), Wielopła Brodpol WP-165 2W - machine in stock - Polish production - Year of production 2005 TECHNICAL PARAMETERS: - cutting width 380 mm - cutting height 165 mm - diameter 300 mm - four upper pulling years - pneumatic roller pressure - four lower pulling rollers - two rows of pawls - diameter of spindles 70 mm - spindle speed 3640 rpm - main engine 2 x 55 kW - total power of 114 kW - 500 mm horizontal clearance Machine dimensions: - length 220 cm - width 180 cm Kjdpfx Aofum U Eeh Ejdw - height 220 cm - weight 2,940 kg

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 4,717 h, load capacity: 2,000 kg, lifting height: 4,700 mm, load center: 500 mm, fuel type: gas, mast type: triplex, power: 38 kW (51.67 HP), motor manufacturer: Toyota, gearing type: hydrostat, DGUV certified until: 12/2024, Equipment: CE marking, cabin, full service history, lighting, pallet forks, sideshift, trailer coupling, Toyota Tonero 2t LPG Forklift with Weighing System Ref: 10051 Year of manufacture: 2007 Operating hours: 4,717 h UVV inspection & maintenance: 12/23 at 4,694 h by Toyota Weight: 3,610 kg Length: 3,395 mm Width: 1,155 mm Height: 2,085 mm Load capacity: 2,000 kg Load center: 500 mm Lifting height: 4,700 mm Fork length: 1,200 mm (forks are new) Mast: Triplex with full free lift Fork carriage: Sideshift Engine: Toyota 4Y ECS Engine power: 38 kW Front tires: 21x8-9/6.00 Rear tires: 18x7-8/4.33 Equipment: - Factory-fitted weighing system (digital display) - Multifunction display in the dashboard - Sideshift Kdjdpfx Asumk Tljh Eow - Road lighting / work lights - Toyota SAS (System of Active Stability) - Adjustable steering column - Grammer MSG65 seat - Semi-cab with roll-up weather protection on the right - Front and rear windows including wipers - Documentation The machine can be demonstrated on site by arrangement. All information without guarantee. Subject to errors and prior sale.

Year of construction: 1999, condition: used, The DSG 200 vertical sawmill is an ideal option for carpentry shops specializing in furniture and wood flooring, it is efficient and performs effectively. A used Wintersteiger mini wood sawmill is a very good investment, a big plus of this machine is that it doesn't take up as much space as standard devices of this type, and at the same time it is great for processing raw material. It is used for cutting individual pieces and fitting them to the appropriate size. Operation of this device is not particularly complicated and can be learned quickly. The biggest advantage of our sawmill is its rich equipment, which includes, first of all, a saw sprinkler system, controlled from the panel, which allows precise cutting of wet raw material. It has an independent control for adjusting the height of the upper rollers, which makes it possible to set the height of cut faster. Pneumatic pusher to assist the feed TECHNICAL DATA: -Total power 27.3 kW -Air Jet system motor 2.3 kW -Siemens control panel -Propulsion up to 2m/min -Stroke of traction frame 210 mm -Stroke count 400/min -Cutting height, continuously (steplessly) adjustable on our frame 45-250 mm -Maximum cutting height possible is 400 mm ! -Cutting width with side pressure 80-205 mm -Block length min. 250 mm -Lam thickness from 1.5 mm - depending on the type of wood and cutting height -Blades used : 0,9-1,1 mm -depending on cutting height -Length approx. 5000 mm -Width approx. 1300 mm -Height approx. 2600 mm -Weight : 5000 kg Pneumatic pusher to assist the feed We add to the machine: -complete large saw frame , Kdsdotvm Hdjpfx Ah Esw -small saw frame, -frame pins, -clamps for stretching the frame, -saw attachments, -wet cutting saws, -dry cutting saws , -a set of top pull rollers, - 4 pcs of bottom pull rollers, -complete sliders, -frame yokes, -pocket cutting guides , -loading magazines, -DTR documentation -electrical diagram