Used Generator For Induction Heating for sale (22,334)

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, simple operation and high efficiency) Kjdpfx Agsb E I Utsnelt in a series resonant circuit and a compact design, with cooling enclosed in the generator enclosure. Rittal generator cabinet and GH induction TC150 / 2 resonant circuit Voltage 400V Frequency 50 Hz Current 56 A Power 37.5 KVA as good as new condition! Scope of delivery: Transistor generator, Rittal generator cabinet with cooling and TC150 / 2 resonant circuit (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator Kedpfxjw I T Ivo Agnjlt ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours Klsdpfx Agjy D Hy Eenst The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: Kodsx Ihg Iopfx Agnelt - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Kljdpfx Agsx Ihiijnet Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), ApenGroup LRP28DE Gas-Fired Warm Air Generator Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nominal Heat Input QN: 27 kW Nominal Heat Output: 24.63 kW Connection Voltage: 230V 1N, 50Hz Airflow: 2700 m³/h Kljdpfx Asx Ihlksgnst Protection Class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), LECTROTHERM AJAX TOCCO INDUCTION HEATING Power supply Inductron Inductotherm 330kw Kljdpfxofhnwye Agnet

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Ksdpfjw Hwp Njx Agnslt

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 - manufacturer: Komforts - Power 1 mW. Kodev D Uz Ejpfx Agnjlt - moving floor supply system with hydraulic station, - chimney, - pumps, - control, - hot water accumulator.

Condition: new, gearing type: other, fuel type: diesel, color: blue, empty load weight: 160 kg, driver cabin: other, Vehicle location: Bovenden, Kodpfsmv T D Iox Agnjlt Year of manufacture 2023! Lwa: 92 dB ? 1 Phase POWER Rated-Max: ? 6.0 / 6.3 KVA ? Voltage: 230V ? 3 Phase POWER Rated-Max: ? 7.5 / 7.9 KVA ? Voltage: 400V ? Weight: 160 kg. ? DIM: 950x525x740 mm ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: good (used), Eddytherm 4x Induction Preheating Unit, including accessories. Klsdpjy Tnt Eefx Agnjt

Condition: new, Year of construction: 2025, Firebox output: 510 kW Operating output: 407 kW New device, original packaging: Yes Flue diameter: 250 mm Hot air distribution ducts: 4 x 350 mm Klodpfx Ask Utrwjgnst Firebox length: 1900 mm Firebox width: 900 mm Firebox height: 900 mm Airflow rate: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Heated area: 1,800 m² Oven height without hot air ducts: 3,000 mm Oven width: 1,220 mm Oven length without flue gas fan: 2,700 mm Weight: 1,575 kg

Condition: new, Year of construction: 2025, Firebox output: 350 kW Working output: 279 kW Flue diameter: 200 mm Warm air supply ducts: 3 x 300 mm Firebox length: 1200 mm Firebox width: 740 mm Firebox height: 1040 mm Air delivery: 17,800 m³/h Power consumption of warm air blower: 3 kW Power consumption of flue gas fan: 600 W Designed for room volume: 5,000 m³ Heatable area: 1,000 m² Kjdpfx Ask Utrtegnslt Oven height without warm air supply ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Condition: new, Year of construction: 2024, Furnace output: 175 kW Effective output: 140 kW Flue outlet diameter: 200 mm Warm air distribution ducts: 3 x 250 mm Combustion chamber length: 950 mm Combustion chamber width: 600 mm Combustion chamber height: 860 mm Airflow rate: 8,900 m³/h Power consumption: 3,500 W Designed for room volume: 3,000 m³ Heatable area: 500/600 m² Kledpfx Ask Utrpognet Oven height without warm air ducts: 2,200 mm Oven width: 930 mm Oven length without flue gas fan: 1,700 mm Weight: 615 kg

Condition: new, Year of construction: 2025, Firebox output: 125 kW Working output: 99 kW Flue outlet diameter: 180 mm Warm air supply ducts: 2 x 250 mm Firebox length: 750 mm Firebox width: 560 mm Firebox height: 700 mm Airflow: 6,300 m³/h Kljdpsk Utrhsfx Agnjt Power consumption: 1,500 W Designed for room volume: 1,500 m³ Heating area: 300/350 m² Oven height without warm air ducts: 1,980 mm Oven width: 800 mm Oven length without flue gas fan: 1,280 mm Weight: 415 kg

Condition: new, Year of construction: 2025, Furnace Output: 34 kW Working Output: 29 kW New Device: yes, original packaging Warm air blower, flue gas blower, control unit with digital display: included Warm air delivery pipes: 2 x 180 mm with freely rotatable, plug-in 90° bends Flue outlet diameter: 160 mm Furnace length: 500 mm Furnace width: 400 mm Furnace height: 590 mm Air delivery: 2,200 m³/h Kledpfx Ajk Utraegnet Power consumption: 400 W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air delivery pipes: 1,560 mm Stove width: 550 mm Stove length without flue gas blower: 920 mm Weight: 190 kg

Condition: ready for operation (used), Power: 11 kW, tank capacity: 20 L, weight: approx. 95 kg. On-site inspection is available. Kedpjyxgr Defx Agnslt

Condition: good (used), Kroll M 150 Mobile Hot Air Generator Applications: Heating of halls, tents, and construction sites Frost protection in horticultural businesses or warehouses of all kinds Rapid drying of new buildings Supplementary heating during the cold season Kedpfx Agsxwkw Eenslt Fuel: Heating oil EL Nominal heat output: 135 kW Nominal heat input: 150 kW Oil throughput: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Protection class: IP 44 Dimensions: Length: 2600 mm Width: 900 mm Height: 1300 mm Weight: 270 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 200 kg, REA Jumbo 115 / Jumbo 200, mobile warm air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, pre-installed heating oil filter, radial fan, and plug-ready thermostat interface. Year of manufacture: 2007 - Rated heat input: 115 kW - Air output: 9,000 m³/h - Connection: 230 V - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip tray - Outlet opening: Ø 600 mm - Pre-fitted for recirculation operation - Shock-protected electrical distribution - Robust construction with large wheels for easy transport, even on rough terrain Klsdpfx Aeyq Ricognet Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as flue pipes and rain caps are not included in this offer but can be provided on request. Note: The buyer can arrange collection via a freight forwarder. If you do not have contact with forwarding agents, we are happy to provide addresses or arrange inquiries on your behalf.

Condition: used, Year of construction: 2025, machine/vehicle number: K24I440352, fuel type: diesel, motor manufacturer: Cummins, Field of application: Construction Kjdpfov Uhrfjx Agnslt Transport dimensions (LxWxH): 0x0x0 Please contact PFEIFER GROUP for more information

Condition: good (used), Different tool holders . As we informed, they are used on Biglia CNC lathe. Klodpfxjy Shyie Agnst

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Ksdpfx Aoxfrv Esgnolt Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. Kodeyznu Sspfx Agnslt All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Contact our team for details and price.

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Klodpjx Utd Eefx Agnjt Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: good (used), functionality: fully functional, In this offer you are purchasing a ‘Canon RCT 2 / II’ finishing option as good as new Object of sale: 1 x Canon RCT II suitable for various Canon models Counter readings: Total: Approx. 555 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Kljdpfxeu Rbb Ns Agnet The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.