Used Gildemeister Gs 20 for sale (31,636)

Condition: used, Multispindle lathe GILDEMEISTER GS 20 Itjdpfx Acsz I Utcopen

Condition: used, Multispindle lathe GILDEMEISTER GS 20-6 Itsdpozq Hrlsfx Acpsn

Condition: used, Pick-up truck pick-up control unit Pietro Cucchi full-body loader Itsdpfxezi U H Io Acpen

Condition: reconditioned (used), functionality: fully functional, GILDEMEISTER GS20 LATHE VARIANT 25 MM ELECTRICALLY AND MECHANICALLY REFURBISHED -REFURBISHED PNEUMATIC SECONDARY CHUCK -NEW AIR TREATMENT UNIT AND SOLENOID VALVES -RADIAL AND AXIAL SLIDES IN POS. 1-2-4-5 -WORKPIECE PICK-UP AT POS. 6 MECHANICAL OVERHAUL: Itsdpfxew Sxpte Acpsn 1. TURNTABLE OVERHAUL 2. SLIDE OVERHAUL 3. FRONT AND LEVER OVERHAUL 4. SPINDLE OVERHAUL 5. COLLET OPENING/CLOSING SYSTEM OVERHAUL 6. THREAD CUTTING UNIT OVERHAUL ELECTRICAL OVERHAUL: 1. NEW SIEMENS S71200 PLC AND SIEMENS KTP700 PANEL 2. CAM ENCODERS 3. RELAY REPLACEMENT

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 Itsdsin Ub Topfx Acpsn - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: good (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, 1 used CNC lathe Manufacturer: Gildemeister Model: CTX 200 Control: Heidenhain Elekto Pilot 1190 Year of manufacture: 1997 Operating hours: approx. 38,000 hours Swinging diameter over bed: 440 mm Swinging diameter over slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5000 rpm Turret: 12 stations Tool holder: 20 VDI Machine dimensions L x W x H: 2800 x 1651 x 1771 mm Machine weight: approx. 3000 kg Itodpfozh Ea Nox Acpen Accessories: Coolant system Tailstock Documentation -- Used machine, no warranty -- -- Subject to prior sale and errors --

Condition: used, Multispindle lathe GILDEMEISTER AS 20 Itodpjz I Ur Esfx Acpsn

Condition: used, Multispindle lathe GILDEMEISTER AS 20 Itodpfx Aoz I Ur Sjcpjn

Condition: good (used), Year of construction: 2013, functionality: fully functional, Fanuc control system, Itedpezz H Dvofx Acpon tool extraction spindle, powered tools, tool magazine.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 11,600 h, functionality: fully functional, spindle bore: 107 mm, spindle speed (max.): 4,000 rpm, overall weight: 10,000 kg, controller model: Siemens 810D, Equipment: chip conveyor, TECHNICAL DETAILS Maximum swing diameter: 680 mm Swing diameter over X-guide: 565 mm Longitudinal travel: 1,300 mm Cross travel: 315 mm Spindle head: h5 Spindle diameter at front bearing: 150 mm Spindle bore: 107 mm Maximum torque: 600 Nm Spindle speed: 4,000 rpm Chuck diameter: 315 mm Rapid traverse X-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool turret for: 12 tools Driven tools: 12 Tool holder: VDI 40 Quill stroke: 120 mm Quill taper: MK 5 MACHINE DETAILS Control system: Siemens 810D Dimensions & Weight Itsdpsz N Aauofx Acpen Machine dimensions with chip conveyor (L x W x H): 5,700 x 2,600 x 2,210 mm Machine weight: approx. 10,000 kg Operating Hours Power-on hours: 47,781 h Spindle hours: 11,600 h EQUIPMENT Hydraulic steady rest, clamping range 30-245 mm Chip conveyor KNCS-N 315-91 power chuck

Condition: used, Year of construction: 2007, Gildemeister CTX 520 linear CNC turning machine Gildemeister Type/Model: CTX 520 linear Condition: Used Year of manufacture: 2007 Itodpez Ng R Dofx Acpon Technical data Working area max. turning diameter: 680 mm Turning diameter over X-axis guide: 565 mm Chuck diameter: 250/315 mm Spindle bore: 107 mm Spindle speed C-axis (main spindle): 400 rpm Travel in X-axis: 315 mm Travel in Z-axis: 1350 mm Number of tools: 12 Power max. 100% duty cycle: 4.9 kW Torque 100% duty cycle: 10.5 kW Spindle speed range: 4500 rpm Tailstock Tailstock stroke: 1200 mm Tailstock force: 14 kN Taper: 5 MK Quill stroke: 120 mm Coolant system Capacity: 250 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: 65 kVA / 100 A Operating voltage: 400 V Dimensions and weight Weight approx.: 10 t + 0.65 t Dimensions approx.: 6000 x 3050 x 2270 Equipment - Chip conveyor Inquiry item: Transport costs will be provided in an individual offer.

Condition: used, Multispindle lathe GILDEMEISTER GM 20 AC Iodpfezpzm Uex Acpetn

Condition: new, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 [mm] -Bar passage extension on request 25 [mm] - Cross carriages : 4 (pos.1-2-4-5) - Maximum feed length: 100 [mm] - Main spindle speeds : 400 - 4000 [rpm] with threading,400- 5000 [rpm] without threading - Travel time: 0.7 [s] - Cycle time: 1.4 - 60 [s] - Power: 11 [KW] ELECTRICAL PROVISION FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT consisting of theAC motors (protection type lP 54), main motor and feed with a PLC programmable Siemens S7-1500 DOCUMENTATION: CE certification with manuals Wiring diagrams I Hard copy + 1 Copy on USB with files in .pdf format EC Directive 2006142lCE - 2014130/EC Iedpfx Acjq Nzl Tspetn 2O14I68IUE STANDARD

Condition: used, turning diameter over cross slide: 185 mm, turning length: 250 mm, turning diameter: 280 mm, spindle bore: 50 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 285 mm, total height: 1,730 mm, total length: 2,180 mm, total width: 1,610 mm, overall weight: 3,000 kg, General Application: Itodpozi Uqgofx Acpsn The Gildemeister CT 20 is primarily used in precision machining, especially for the production of complex components in industries such as the automotive industry, aerospace, and general mechanical engineering. Due to its capabilities, it is suitable for tasks that require high accuracy and efficiency in turning operations. Advantages: - The compact design allows for efficient use of space in manufacturing environments. - The high spindle speed of 6000 rpm enables fast machining and reduces cycle times. - The versatile turret with 12 tools and 8 rotating tools increases productivity, as multiple machining operations can be performed without tool changes. - The robust spindle motor power of 7.5 kW ensures consistent performance even under heavy workloads. - The precise machine travels in the X and Z axes facilitate complex machining operations and contribute to high-quality production. Buffer battery is low, machine data needs to be checked!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,229 h, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller manufacturer: FANUC, controller model: 310i-S, number of axes: 8, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Specification • Mechanical and electrical preparation for fire extinguishing system • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 liters • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar loader: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E • Sliding headstock travel: 80 mm • Tooling on slides • Tool breakage detection system Iedox D H I Topfx Acpstn • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (upgraded) • Chip discharge height: 1250mm Technical Specification Counter Spindle Yes

Condition: good (used), Year of construction: 2006, functionality: fully functional, Fanuc control system, 11 axes, powered tools, Ijdpfx Ajz E Ayfecpjtn tool changer spindle, Iemca tool magazine.

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, spindle bore: 70 mm, center width: 1,350 mm, turning diameter over bed slide: 500 mm, swing diameter over cross slide: 290 mm, quill stroke: 180 mm, quill diameter: 80 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 3,000 rpm, feed rate X-axis: 8 m/min, feed rate Z-axis: 10 m/min, total length: 3,400 mm, total width: 1,950 mm, total height: 1,850 mm, type of input current: three-phase, spindle motor power: 12,000 W, overall weight: 3,100 kg, travel distance X-axis: 260 mm, distance between centers: 1,350 mm, Used, very well-maintained cycle-controlled lathe "GILDEMEISTER" model: NEF 520 - HEIDENHAIN control system - Three-jaw chuck SCHUNK ROTA-S plus - Quick-change tool holder MULTIFIX size "B" - Centering tool - Coolant system Iodpoz S Uarofx Acpstn - Documentation Technical data and dimensions: Subject to change without notice. The machine can be inspected in operation by appointment.

Condition: used, Year of construction: 2004, CNC lathe Gildemeister Type/Model CTX 520 linear Condition: Used Year of manufacture: 2004 Operating hours: 86,490 Spindle hours: 12,970 Technical data Working area max. turning diameter: 680 mm Turning diameter over X-axis: 565 mm Chuck diameter: 250/315 mm Spindle bore: 107 mm Spindle speed C-axis (main spindle): 400 rpm Travel in X-axis: 315 mm Travel in Z-axis: 1350 mm Number of tools: 12 Power max. 100% duty cycle: 4.9 kW Torque 100% duty cycle: 10.5 kW Speed range: 4500 rpm Tailstock Tailstock travel: 1200 mm Tailstock force: 14 kN Taper: 5 MK Quill travel: 120 mm Ijdpfx Aezn Ih Nscpetn Coolant system Capacity: 250 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: 65 kVA / 100 A Operating voltage: 400 V Dimensions and weight Weight approx. 10 t + 0.65 t Dimensions approx. 6000 x 3050 x 2270 Equipment: - Chip conveyor without pump - Machine feet Inquiry item: Transportation costs will be provided in a separate quote.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, CNC Lathe Manufacturer: Gildemeister Model: CTX 420 linear V3 Year of Manufacture: 2003 Control Unit: Heidenhain Plus IT Swing diameter over bed: 680 mm Iedpfx Aoxc Uq Tecpjtn Swing diameter over cross slide: 565 mm Cross travel: 260 mm Longitudinal travel: 635 mm Drive power (40/100%): 25/37 kW Speed range: 20 – 5000 rpm Weight approx.: 6500 kg Equipment: Driven tools: 12 stations Tool turret: 12-position Sauter turret VDI 30 Partly hollow clamping chuck Tailstock Automatic quill travel Quill taper: Mk 5 Chip conveyor Measuring arm Oil mist extraction unit Subject to prior sale and errors.

Condition: used, Gildemeister CTX 320 Linear V6 with Y axis New 2005. FANUC 18T . Collet chuck Supplied with no collets, the original 3 jaw chuck will be supplied. there is also the option to supply a bar feed unit (Imeca VIP 70CNC, year 2001) which is compatible for the machine, however currently not set up. VDI and Driven Tooling Supplied as per images - Note Filtermist Unit will not be supplied Iodpoztb Tcefx Acpstn

Condition: used, Year of construction: 2002, functionality: fully functional, CNC lathe Gildemeister Type: CTX 420 V6 Linear Year of manufacture: 2002 Serial number: 02260000631 Control system: Siemens PowerLine Technical data: Working area: Max. swing diameter over X-axis guide 680 mm Swing diameter over X-axis guide 565 mm Chuck diameter 200/250 mm Travel in Z-axis 260 mm Travel in X-axis 635 mm Spindle head: Spindle head (flat flange) 170 main spindle, 140 counter spindle Spindle diameter in the front bearing 120/90 mm Spindle bore 79/57 mm Main drive: Power of the AC main drive (100% duty cycle) 25 kW Torque max. 270 Speed range 25-5000 rpm Counter spindle Drive power AC 25 kW Torque max. 7000 Nm Speed range 35-7000 rpm Tool carrier Number of tool stations 12 Tool interface according to DIN 69880 Cylindrical shank diameter 40 mm Indexing time 30 ° 0.15 sec. Number of driven tools 5 Drive power 13.2 kW Torque 28 Nm Speed max. 4500 rpm C-axis, main spindle/counter spindle Speed range 0-250 rpm Torque 200/120 Nm Speed during point positioning 0.025 degrees Iodpfx Ajz I T Avocpotn Y-axis, vertical travel +/- 40 mm Hydraulics Capacity, total approx. 25 l Pressure max. 80 bar Pressure for clamping device max 70 bar

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02260002571, The Gildemeister CTX 420 Linear is a powerful and highly precise CNC universal lathe (or turning-milling center) designed for demanding series and mass production. It is primarily characterized by its linear motor technology in the X-axis, which, compared to conventional ball screws, ensures extremely high dynamics, rapid positioning, and wear-free operation. Itsdpez N Etkjfx Acpjn Equipment: -Single spindle, three-jaw chuck, 11-position tool turret, automatic tailstock, chip conveyor Control system: -Heidenhain Accessories: -Workbench, under-mounted telescopic drawer unit (7 drawers) Contents: Hand tools, analog and digital measuring instruments, indexable cutting inserts.

Condition: new, Year of construction: 2024, Gildemeister 20ACN allows, again via SIEMENS operator panel, to set and change spindle rpm, cycle time and thread speed easily. It can machine workpieces up to 25 mm in size with equal ease and precision. It offers the possibility of mounting NC slides. Position 6 consists of: NC parting slide and NC take-up slide, NC take-up spindle with variable rpm, with synchronization and stop. The NC take-up spindle, specifically programmed, has the option of becoming a C-axis. Technical data: - Max. round bar diameter mm 20 / 25 - Max. square bar diameter mm 17 - Bar pusher mm 100 / 125 - Front spindle stroke mm 86 Ijdpfsuqh Ihex Acpstn - Longitudinal guide block stroke mm 50 - Radial slide stroke mm 42 / CNC 50 - Axial slide stroke mm 50 / CNC 56 - CNC cutting stroke mm 42 - CNC pickup slide stroke mm 42 - CNC Pickup Spindle Stroke mm 100 - Continuous spindle speed rpm rpm 420 - 5,000 - Rapid traverse times s 0.5 - 0.7 - Main drive power 11 kW / CNC 15 kW - Installation area without bar guide mm 4,000 x 1,900 - Net weight kg 5,500 The Gildemeister 20AC, on the other hand, is a multispindle lathe that targets highly specialized industries where precision and accuracy are imperative.

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Itodpfxjyh Hg Ne Acpen Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolpost with tool holders Documentation and accessories Machine is powered up and available for inspection

Condition: good (used), Year of construction: 2001, Machine is in good working condition. Parts shown by hand not come. Itodpfx Acsz Uvpmepjn