Used Gripper Feed for sale (12,109)

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. Iaedpedzqltofx Ag Usu throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Year of construction: 1977, condition: used, Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos Iasdpetigw Nsfx Ag Ueu -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

Condition: new, Year of construction: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 rpm at full feed length Feed force: 90 N Optionally with mechanical control valve or optionally with electric valve (24V or 230V) Iaodpfxj Ea U He Ag Uju Many other band widths and feed lengths available.

Condition: like new (used), Year of construction: 2024, Band width: max. 76mm Feed length: max. 76mm Band thickness: 0.076 - 1.91mm Speed: max. 195 strokes/min at full feed length Feed force: 205N with mechanical control valve or optionally as in the photo with electric valve (24V or 230V) also available in: - Band widths from 38...400mm - Feed lengths up to max. 300 mm - Band thicknesses 0.05...3.18 mm Iasdpfxsxaqvj Ag Uju

Condition: used, Colour: Grey Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu Iaodjwnhabepfx Ag Uou t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available - Documentation available: No - CE certificate present: No - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Colour: Grey Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. Isdpfewng S Aex Ag Ueau With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Material of press plates: Aluminium - Number of cylinders [pcs]: 10 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Ijdpfx Agey H Dblj Ueau Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Year of construction: 2012, condition: excellent (used), 1 used feed water tank ----- cylindrical, horizontal on saddle feet, insulated with degaser Iedomfq Rkepfx Ag Uoau capacity approx. : 5.900 ltr max. allow. work. pressure : 0 / + 6 bar max. allow. work. temp. : 0 / + 200°C year of construction : 2012

Condition: used, Veneer press Feed-through press HOT Colombo Iasdpswnhvvsfx Ag Ueu Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Number of stages [pcs]: 1 - Number of cylinders [pcs]: 8 - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, functionality: fully functional, Removal/Feed Unit, Pallet Roller Conveyor/Roller Conveyor Manufacturer: Rack & Roll Condition: Used Iaodpfx Ajydfugog Usu Year of Manufacture: 2019 Model: Gravity Segment Length: approx. 2395 mm Total Width: approx. 1145 mm Roller/Conveyor Width: approx. 1055 mm Roller/Axle Spacing: approx. 100 mm and 150 mm Roller Diameter: 60 mm Frame: 85/35 mm Material: Galvanized steel Up to 2 brake rollers per segment Stock quantity: 28 units Price per unit Internal Item Number: 2026012601 Features: Condition: Fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection Address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with an individual quotation or advise you on planning or installation matters. Simply let us know your requirements and site conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, and the electronics sector. Together, we will find solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order-picking racks or bins.

Condition: used, Year of construction: 2019, functionality: fully functional, Pick-up/discharge unit, pallet roller conveyor/roller conveyor Manufacturer: Rack & Roll Condition: Used Year of manufacture: 2019 Model: Gravity Segment length: approx. 2375 mm Overall width: approx. 1125 mm Roller/conveyor width: approx. 1035 mm Roller/axle spacing: approx. 100 mm and 150 mm Roller diameter: 60 mm Frame: 85/35 mm Material: galvanized steel Up to 2 brake rollers per segment Stock: 20 units Price per unit Internal item number: 2026012602 Iaodpfx Agoydfuye Uou Features: Condition: fully functional with signs of use Ideal for fast material handling Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Due to the excellent manufacturing quality, your material will glide smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to prepare a customized offer for you or provide technical advice on planning and installation. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our outstanding network of specialists. We have already successfully completed projects for companies from various sectors, such as logistics, pharmaceuticals, trades, and the electronics industry. Together, we will find cost-effective and sustainable solutions to optimize your workflow and material handling. We can also offer you fully automated sorting systems or complementary components such as picking racks or containers.

Condition: used, bore 35 mm circle diameter 50 mm A set of spacer rings with a 10 mm keyway for use on various woodworking machines, particularly planers. Iaedpozdvbisfx Ag Uou Image for illustration purposes only. Available sets: 3

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Iajdpfx Aey Urtfjg Usu Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Hydraulic feed unit 2DA1F with 2.2 kW motor, 1430 rpm, with planetary reduction gearbox for speed reduction, electric adjustment via worm gear motor, Iajdpolxzhtefx Ag Uju Hydraulic feed unit 2D35ZK with 4 kW motor, with bevel gearbox, control lever with 2 sensors, e.g. for SCHULTE HB 12 band saw

Condition: good (used), ZMM SLIVEN CU 400 Control and lead screw lathe 3-axis digital display MITUTOYO max. turning length 2,000 mm center height 250 mm hollow spindle diameter 60 mm Equipment: 3-jaw chuck 250 mm Isdpfezdricjx Ag Ujau All other accessories shown in the pictures and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation, and in the invoice. FCA (Free on Truck) D-32457 Porta Westfalica packaging only Delivery time: immediately available Subject to prior sale / Payment due immediately upon completion of purchase

Condition: used, Year of construction: 2010, _____Keenan Mech Fiber 300 - Year of manufacture: 2010 - Container volume: 12 m³ - Three-point linkage - Discharge at the front left - Tires: 305/55 R 22.5 - Lighting system - STAD 400 control panel Net price: 4,900.00 Gross price: 5,831.00 Iasdpfx Agjzdmu Hs Uou Storage location: null

Condition: good (used), Year of construction: 2015, SAEILO SJ-660/3300 Lead and Drive Spindle Lathe Year of manufacture: 2015 3-axis digital display K&C ARBAH-L Distance between centers: 3,300 mm Max. center height: 330 mm Iedozdp Dwopfx Ag Ueau Swinging diameter over lathe bed: 660 mm Swinging diameter over cross slide: 438 mm Bed width: 400 mm Spindle mounting: DIN 55029 - Camlock - Size D1-8 Spindle bore: 82 mm Spindle speed range: 15 - 1,500 rpm, 12 steps Equipment: Four-jaw chuck, approx. 300 mm Steady rest Coolant system Multifix clamping system Machine light Technical data & layout plan – see PDF. All technical specifications, images and content are non-binding and without warranty. Subject to change and errors. All other accessories shown in the pictures and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. FCA (Free On Board Truck) D-32457 Porta Westfalica excluding packaging Delivery time: immediately Subject to prior sale / Payment due immediately upon completion of purchase.

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8320’ black-and-white production system Items for sale: 1 x Ricoh Pro 8320 with the following specifications: incl. Vacuum Feed LCIT RT5120 incl. Booklet Finisher SR5120 incl. Trimmer Unit TR5050 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 13,754,808 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Isdpfszaqi Isx Ag Usau Seaworthy packaging and worldwide shipping available on request! Before dispatch or collection, a functional test will be recorded on video for you. For further information, you are of course welcome to contact us directly.

Condition: new, Year of construction: 2026, Feed with uniform speed without loss of strength Metal gearbox with hardened gears Metal cover of the feed rollers Right - and left-hand rotation Powerful motor Durable PU feed rollers Tripod with an extended arm as standard Ijdecnxmzepfx Ag Ujau Individual tilt and adjustable for horizontal and vertical use With counter Model VSA 48 L Item No. 5115500 Technical data maximum unloading 1050 mm Number 4 feed rollers Roll diameter 120 mm Roll width 60 mm Travel of the roll 25 mm 8-speed Circulator Speeds 2 / 4 / 5.5 / 6.7 / 11 / 13 / 16,5 / 33 m / min. Motor output 0,75 kW Connection 400 V / 50 Hz Weight 65 kg

Condition: used, 3 St. length 1.250 mm height 700 mm Holz-Her Type 1117 feed mechanism for the smooth and safe feeding of workpieces into routers, circular saws, and other woodworking machines. The feed device ensures a constant feed rate, improves machining quality, and enhances workplace safety during woodworking. Ijdpfezczg Njx Ag Uoau

Condition: good (used), Barrel lifter, barrel handling, barrel gripper, barrel lifter, barrel handling, barrel gripper Iodpfsd Aghkex Ag Ujau -Drum lifter with: gripper head -Load capacity: kg -Suitable for: 1 x 200-L steel bung drums, steel lid drums, rolling hoop drums -Reception: 410 mm -Automatic opening when: setting down the barrels -Number: 2x grippers available -Price: per piece -Dimensions: 340/305/H900 mm -Weight: 47 kg

Condition: used, Feed unit WGOMA VS 34 – used – including stand ----- Technical data ----- Rollers: 3 pieces, Number of speeds: 4 Iaedew Nv N Sopfx Ag Uou

Condition: good (used), D-1035-Double bulk feeder with weight Used Stainless Steel double bulk feeder with weight. Ijdpjn Nxqwofx Ag Uoau Dimension: Vat L 1800 X W 850 X H 1300 mm Bigger belt: 460 mm, Small belt 100 mm, flight 80 mm L 2700 + weight 500 mm , Total L 3200 mm

Condition: used, Year of construction: 2000, Table size: 1340 x 800 mm + table extensions Table height: 870 mm Control panel at eye level Swivel range: -5 - 45° Aigner integral stop Spindle speeds: 3000 / 4500 / 6000 / 9000 1/min Vertical adjustment: 120 mm Milling arbor: 30 mm / MK 5 Dust extraction port: 2x 120 mm Iedpfx Aszb N T Iog Ueau Weight: approx. 1000 kg Storage location: Supplier

Condition: good (used), functionality: fully functional, Internal article number: 26007 Universal milling machine Iedpfxjzb Ni Ao Ag Usau Deckel FP1 Travel distances: X300 / Y160 / Z340 mm Spindle stroke: 60 mm Connection power: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed rate: Continuously variable, 5-500 mm/min Rapid traverse function: Not operational! The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our more than 500 m² heated storage area.