Used Handilaz Mini Particle Counter for sale (5,753)

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Gjdpsxhf Tijfx Al Sokc Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: used, This listing is for a Pharmagraph S1816 Particle Counter (1 of 9) The unit is in full working condition and is ready for immediate release. Gedjxtnquepfx Al Sekc The S1816 series is a continuous-monitoring airborne particle counter designed for use in pharmaceutical cleanrooms, isolators, filling suites and similar controlled environments. It is built by Pharmagraph (UK) and intended to meet stringent regulatory/clean-room requirements (e.g., for EU GMP Annex 1 compliance). The unit houses a laser-based sensor (in particular a Met One 6015 sensor) in a stainless-steel enclosure, intended for permanent monitoring rather than portable spot checks

Condition: used, This listing is for a Pacific Scientific 3313LL Met One Particle Counter The unit is in full working condition and is ready for immediate release. Operational & Practical Notes / Behavior Gkedpfx Ajxv Ab Hjl Sjc The 3313LL counts particles by passing a laser (or light source) through the sampled air stream; when particles pass through the beam, they scatter light, which is detected by a photodetector. By having multiple size channels, the instrument can bin the counts into different particle-size ranges (for example: 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm). It likely offers programmable sampling intervals, hold times, alarm thresholds, etc. (common features in Met One/Met One‑type instruments). Data export via serial is standard, allowing integration with control or data acquisition systems. Because it’s a relatively high‑flow device (1 CFM), it can sample a substantial volume of air (improving statistical confidence in counts). The stainless steel construction helps with durability, cleanliness, and possibly resistance to corrosion or harsh environments. As a used / legacy device, calibration, maintenance, and replacement parts (filters, laser, pump, optics) may be important considerations.

Condition: good (used), Filter testing, filter test system, filter measurement system, filter test system, particle counter, dust particle counter -Particle counter: Laser Particle Count -Type: CLJ-E -Number: 2 particle counters available -Price: per piece Gksdpfx Aljyk Dipj Sjc -Dimensions: 280/205/H135 mm -Weight: 2.4 kg/pc.

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Gkedpoxv A T Nofx Al Ssc Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder The unit is in full working condition and is ready for immediate release The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​ Gsdpfx Ajxv A Nqol Sskc

Condition: used, Haas Mini Mill with 4th Axis 5C Collet System (HA5C P1), 10 Station ATC, 6000RPM, Table 12 x 28", Coolant Gkedpfozvrgxjx Al Sjc

Year of construction: 2021, condition: like new (used), functionality: fully functional, Specification Capacity 30 Ton Working length 1300mm Stroke length 100mm Throat depth Maximum open height without tools Fast speed of beam Bending speed Gkjdpeziahdefx Al Ssc Return speed 200mm 300mm 100mm/s 10mm/s 90mm/s Backgauge travel 300mm Length 1500mm Width 1200mm Height 1910mm Approximate weight 2000kg Machine equipped with Cybelec CybTouch 8 control (X & Y axis) Top and bottom tooling Light guards

Condition: used, Haas Mill, New 2018, Table 12 x 36", 10 Station ATC, BT 40, 6000RPM Spindle, USB, Coolant. Gkjdozvrf Uepfx Al Ssc

Condition: used, Year of construction: 2024, New: Yes Gsdpfx Aez Rw I Nol Sjkc Please contact us for more information.

Condition: used, Used Becomix model Beco Mini Lab homogenizing mixer.  Manufacturer: Becomix. Capacity: Working capacity maximum of 5 Litres approximately Dimensions: 820mm x 820mm x 1250mm high approximately Pressure: -1/+1 Bar maximum working pressure  internally; 4 Bar maximum working pressure of the external jacket Conical welded bottom with a clamped dish top. Pressure and vacuum sealed by a double acting axial seal rings and cooled by barrier water flow. Bottom entry homogenizer: Power 1.55kW Torque 2.5Nm Specifications: Power: 1.6 kW Type: Mini Lab Gkedpfsyhd I Hex Al Sec Dimensions: 820mm x 820mm x 1250mm Vacuum (Y/N): Y Capacity: 5 Litres Material Of Construction: Stainless Steel Jacket (Y/N): Y Type Of Drive: Bottom entry Weight: Estimated: Kg250.0 Dimensions: 820mm X 820mm

Condition: new, functionality: fully functional, mileage: 1 km, power: 10 kW (13.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 07/2026, emission class: euro5, shovel volume: 0.2 m³, digging bucket width: 4,200 mm, Year of construction: 2026, machine/vehicle number: GT1000, Equipment: additional headlights, adjustable boom, adjustable chassis, steel tracks, GT1000 mini excavator Mini excavator The GT1000 mini excavator is a lightweight and exceptionally maneuverable machine weighing 1000 kg, designed for precise earthmoving, installation work, and landscaping. Thanks to its compact dimensions, this machine is ideal for locations with limited space, such as private plots, narrow passages, or work inside buildings. Engine The machine is equipped with a reliable Yanmar 3TNV70 engine that meets the EURO 5 emission standard. The engine, with an output of 13.6 hp (10 kW), ensures stable, quiet, and fuel-efficient operation, which guarantees high reliability and a long service life. Work equipment and operation The GT1000 mini excavator features a precise hydraulic system that is operated via ergonomic joysticks. The counter-cylinder on the boom provides extra protection for the working parts and increases safety during operation. The standard bucket with a width of 420 mm and a capacity of 0.02 m³ enables precise digging work. Working range The GT1000 offers a maximum digging depth of 1680 mm and a maximum digging height of 2490 mm. The dumping height is 1760 mm, and the maximum digging reach on the ground is 2430 mm, ensuring efficient execution of basic earthworks. Maneuverability The minimum digging radius is 1340 mm, and the turning radius of the platform is only 733 mm, ensuring very good maneuverability in tight spaces and easy operation of the machine. Dimensions The total length of the machine is 2650 mm, the total width is 930 mm, and the total height is 2200 mm. Thanks to its compact design and extendable tracks, the machine is easy to transport and deploy in confined spaces. Gkjdpfxezifkqs Al Sjc Technical data Model GT1000 Engine Yanmar 3TNV70 EURO 5 Weight 1000 kg Power 13.6 hp Bucket width 420 mm Bucket capacity 0.02 m³ Joystick Yes Counter-cylinder on the boom Yes Swivel boom Yes Extendable tracks Yes Max. digging reach on the ground 2430 mm Max. digging depth 1680 mm Max. digging height 2490 mm Max. dumping height 1760 mm Turning radius 1190 mm Min. digging radius 1340 mm Max. lifting height dozer blade 175 mm Total length 2650 mm Total height 2200 mm Total width 930 mm Total track length 1100 mm Platform swing radius 733 mm Ground clearance upper structure 380 mm Undercarriage width 950 mm Track width 180 mm Track width 320 mm

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: Mini 76 TH, type of input current: AC, input voltage: 400 V, working width: 760 mm, AUTOBOND MINI 76 TH automatic laminator. 2015 Model. Fully refurbished. Max sheet size: 76 x 105cm Min sheet size: SRA4. Speed: 60 m/min. 22 million impressions. Heidelberg Feeder. Tool temp YCU. Jogger delivery. Optional post heat system. Gedpfezpw Izsx Al Sekc

Condition: like new (used), functionality: unexamined, Industrial Air-Cooled Mining Infrastructure – Available as a Package or Individually An opportunity to acquire 8 used steel data-center containers designed for high-density computing and cryptocurrency / Bitcoin mining applications. The units have previously been configured for mining computers and provide a ready-made physical infrastructure that can potentially be recommissioned for cryptocurrency mining, high-density computing, or other suitable data-processing applications. EQUIPMENT Quantity: 8 containers Type: Data center / cryptocurrency mining containers Reference: Digital Shovel Mini-Pod M300 8 Datacenter container Construction: Steel Cooling: High-volume air cooling Gkjdsz Dxcmepfx Al Sjc Approximate dimensions per unit: • Width: 2.24 m • Main container depth: 2.44 m • Filter section: approximately 1.20 m additional depth • Height: 2.56 m COOLING & INFRASTRUCTURE The containers are designed around a straightforward high-volume air-cooling system. Cooling air is drawn through large filtration sections and exhausted to the outside with large fans. The mining computers themselves have are not included in the package. However, electrical wiring and connectors for connecting computing equipment are in the containers. This gives a buyer an existing infrastructure platform that can be adapted according to the requirements of the intended installation. CONDITION 7 containers are substantially complete. The containers are generally externally tidy, with some minor rust visible around the forklift lifting areas. Some doors between containers are missing as a result of the configuration of the previous installation. During the appraisal inspection, the fan blades were manually checked and found to rotate freely. 1 container is incomplete and is missing its fans and front grille assembly. One container door is also reported as damaged. Please note that no electrical testing of the wiring or fan motors was performed as part of the appraisal, so buyers should carry out their own technical inspection and testing before commissioning the equipment. IMPORTANT INFORMATION These are used units and are offered in their present condition. The appraisal states that production of these particular mining containers has ended. It also reports that Digital Shovel advised that the containers were assembled outside its own factory and that the manufacturer's normal warranty is therefore only available on a limited basis. Prospective purchasers are encouraged to inspect the equipment and independently verify its electrical, mechanical and operational condition before purchase.

Condition: new, functionality: fully functional, empty load weight: 1,600 kg, Year of construction: 2026, For sale: JKW-16 tracked mini excavator with an 18.4 kW diesel engine. The machine's operating weight is 1600 kg, and the maximum digging depth is 1800 mm. The excavator features a 360° rotation, a cabin, and work lights. A significant advantage of this machine is its extendable tracks, which allow the excavator to be narrowed for passage through tight spaces, gates, or openings, and then widened to increase the track gauge and provide more stable operation during digging. This excavator is ideal for construction, earthmoving, gardening work, and digging trenches for installations, cables, and pipes. Technical specifications: * Model: JKW-16 * Engine: Diesel * Power: 18.4 kW * Operating weight: 1600 kg * Digging depth: 1800 mm * Dimensions: 2270 × 1100 × 2270 mm Gksdpfx Aszudq Hjl Ssc * Bucket capacity: 0.04 m³ * Tracks: rubber, extendable * Rotation: 360° 🎁 FREE INCLUDED: * Narrow bucket – ideal for digging trenches for installations, cables, and pipes, * Wide ditching bucket, * Standard bucket installed on the excavator.

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h Gsdev Da Dljpfx Al Sskc - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: like new (used), spindle diameter 35 mm Godpfxjzx U Nuj Al Sjkc 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (at tel. ). Gkjdjyltvnjpfx Al Sjc Seppi M. MINI-BMS 105 forestry mulcher / MS08 / 5-10 tons / CUT CONTROL / NEW / in stock & immediately available Price: €16,790.00 net / €19,980.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches shrubs and trees up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 forestry rotor with fixed MINI DUO tools (2 carbide plates) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 40 - 100 Intermediate adapter for BE314 Z1 - Approx. 200 mm high - Not required with OPT 372 hydraulic 190° swivel device Optional: MS08 adapter plate incl. screws and mounting = €1,410.00 net A self-contained hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and attachment plate. Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Condition: excellent (used), HAAS Mini Mill 2 Vertical Machining Centre Year 2010 Serial number 1081104 X axis travel 508 mm Y axis travel 406 mm Z axis travel 356 mm Table size 1,016 × 356 mm Maximum table load 227 kg Gsdpfx Alsz N Alwe Sekc Spindle nose to table 102–457 mm Maximum spindle speed 6,000 rpm Maximum spindle power 5.6 kW / 7.5 hp Spindle taper 40 taper — CT40 or BT40 to confirm Automatic tool changer 10 station

Condition: used, Year of construction: 2003, operating hours: 6,128 h, Equipment: all wheel drive, MAKE: BOBCAT MODEL: 753 YEAR: 2003 CE MARKED: YES OPERATING HOURS: 6128 HOURS TIRES/UNDERCARRIAE: 100% POWER: 32KW ENGINE: KUBOTA V2203 WEIGHT: 2150 KG OPTIONS: BUCKET QUICK-RELEASE COUPLER 10 KM/H EXTRA FUNCTION 590 KG LIFTING CAPACITY 2.77 M LIFTING HEIGHT NEW TIRES Gksdpfx Aez Ribbjl Sec

Condition: used, This listing is for a ChemoMetec DK-3450 Allerod Automated Cell Counter The unit is in full working condition and ready for immediate use This automated cell counter is a high-quality lab instrument manufactured by ChemoMetec (Model: DK-3450 Allerod). Provides highly accurate and reproducible cell counting and viability analysis using advanced imaging cytometry technology. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Godpfxezuf Sxj Al Sjkc Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for Maxwell 16 Promega Magnetic Particle Processor MX3031 The unit is in full working condition and ready for immediate use Automated magnetic particle processor designed for efficient, hands-free extraction of nucleic acids and proteins. Processes up to 16 samples simultaneously using pre-filled reagent cartridges to ensure consistent yields and high-purity results for downstream laboratory applications. [[1]()] Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Gkodpfx Aljzgf Spj Soc Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 3285401, type of input current: three-phase, SCM Superfici Mini Plus P spray booth, automatic spraying machine, year of manufacture 2023. Gksdpoz Nggxefx Al Ssc

Condition: used, This listing is for the Ika MS1 Mini Shaker The unit is in full working condition and is ready for immediate use The IKA MS1 MiniShaker is a compact laboratory orbital shaker designed for efficient mixing of test tubes, small vials, and microtiter plates. It offers thorough and uniform mixing for a variety of applications. Key Features Orbital diameter: 4.5 mm for smooth, effective mixing action Speed range: 0 to 2,500 rpm Gedpfx Asxhfumol Sekc With microtiter plates or test tube inserts: ~1,000 rpm max With rubber cup or direct contact: up to 2,500 rpm Operating modes: Touch mode: activates mixing only when pressed Continuous mode: engineered for uninterrupted operation

Condition: used, This listing is for a Halo Labs Horizon Particle Analyzer The unit is in full working condition and is ready for immediate release (No PC/Monitor) The Horizon system from Halo Labs integrates Backgrounded Membrane Imaging (BMI) technology to accurately measure and characterize subvisible particles in a high-throughput, low-volume format. Originating from membrane microscopy, a USP lot release method, BMI images particles on a membrane surface. This fully automated, fluidics-free Horizon system employs disposable membrane plates and automated image processing for quick, reliable particle counts and sizing. Capable of characterizing particles in up to 96 samples per run using only 25 µL per sample, BMI is unaffected by solution refractive index, ensuring accurate measurement of translucent protein aggregates. Gkjdpjxhgakjfx Al Sec Sophisticated image processing techniques are used to analyze and acquire particle data, beginning with a background image of the membrane. After filtering samples by vacuum and capturing particles, the membrane is re-imaged with sample particles on its surface. The sample image is meticulously aligned with the background and processed pixel by pixel to remove background texture, achieving high contrast for the particles. This imaging approach yields high reproducibility and minimizes interference from membrane texture or imperfections. Key Features: Backgrounded Membrane Imaging (BMI) technology for precise particle measurement. High-throughput: Capable of analyzing up to 96 samples in a single run. Low sample volume: Requires only 25 µL per sample. Fully automated, fluidics-free system for seamless operation. Accurate measurement of translucent protein aggregates, unaffected by solution refractive index. Sophisticated image processing for high reproducibility and minimal interference.