Used Hidrogarne Fdl-150-100E/Nc for sale (13,092)

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Lsdjq Abnnepfx Aiwsab Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: new, pressure: 1500Cylinder: nicht beweglichstroke: 350column width: 1500working speed: 3rapid traverse: 22length: 2500width: 1200heigth: 2500weight approx.: 2450Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Lodewwnhdopfx Aiweab Operating manual – available in German and English Two working speeds – for precise and efficient operation This is a stock photo

Condition: new, pressure: 150Cylinder: horizontal verschiebbarstroke: 350column width: 1500working speed: 3rapid traverse: 22length: 2500width: 1200heigth: 2500weight approx.: 2500Horizontally adjustable cylinder: 1000- Horizontally movable cylinder – 1000 mm Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Lasdowwng Tepfx Aiwsb Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English Two working speeds – for precise and efficient operation This is a stock photo

Condition: good (used), Year of construction: 2008, functionality: fully functional, Full-option used 3-meter press brake Type: E Brake 150 3100 Capacity: 3100 x 150 tons E-Control (new original Safan CNC!) 8-axis CNC (Y1, Y2, X1, X2, R1, R2, Z1, and Z2) Hydraulic upper and lower clamping Year of manufacture: 2008 Preparation for bending aid Lasdpfx Ajyw Suheiwsb 1 set of tools included. 2 machines available

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Lajdpfsxhfuasx Aiwob Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: good (used), Year of construction: 2008, Full option used 3 meter press brake Type: E Brake 150 3100 Capacity: 3100 x 150 tons Lajdpfx Ajy Ey Raoiwob E-Control (new original Safan CNC!) 8-axis control (Y1, Y2, X1, X2, R1, R2, Z1 and Z2) Hydraulic top and bottom clamping Year of manufacture: 2008 Bending aid preparation 1 set of tools included. 2 machines available

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 5,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 240 mm, spindle motor power: 7,500 W, controller manufacturer: FANUC, controller model: 0-iTC, number of axes: 2, This 3-axis Kitamura KNC 150 NSA was manufactured in 2010. It features a twin spindle configuration with a maximum speed of 5,000 rpm and a spindle power of 7.5 kW. The machine includes an 8-station turret and a part catcher with a conveyor for efficient automation. If you are looking to get high-quality turning capabilities, consider the Kitamura KNC 150 NSA horizontal turning machine we have for sale. Contact us for further details. • Spindle • Configuration: Twin spindle • Bar capacity (main spindle): 42 mm • Bar capacity (sub-spindle): 25 mm • Tooling • Turret: 8 stations Additional equipment • Part catcher with conveyor • Side chip conveyor • 3-pallet robot system • 120 positions Ø7 per pallet • 120 positions Ø3 per pallet Technical Specification Counter Spindle Yes Driven Tools Yes Laodpsy Dt N Hefx Aiwob

Year of construction: 1991, condition: used, machine/vehicle number: K2940, pression: 150 t Laedpfx Aij Dnf Uoweb working width: 4300 mm clear support width: 3600 mm support throat: 300 mm max. assembly height: ca. 500/700 mm working speed: auf-/abwaerts 41 - 65/10 mm/sec rear stop: 1000 mm electrical connection: 400 V, ca. 15 kVA kW weight: 14 t space needed: 4600 x 1950 x 3100 mm

Year of construction: 1995, condition: used, machine/vehicle number: 30-S/70, circulation-Ø: ueber Bett 625 mm Lodpfxe Nzhde Aiwjab max. center distance: 1500 mm spindle boring: 105 mm spindle speed: 6,6 - 2000 rpm space needed: 4400 x 2050 x 1820 mm weight: 5200 kg

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser Laedpfx Aegigv Dsiwob diameter max 350 mm length max 1.300 mm CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat

Condition: ready for operation (used), Supfina 811-507.4 feed device NC consisting of: ZARN 2052 TN needle axial cylindrical roller bearing, 811-507:03-2 bearing plate, 811-507.2:01-2 guide sleeve, 811-507.2:02-2 roller screw drive, used, normal signs of use, 100% functional, scope of delivery as per photos Ledpfx Aiexah Sfjwjab

Condition: ready for operation (used), Bosch PS200 CNC power supply Philips PE 2189/01 NC 9415 DC 20 - 40V 235W, used, normal signs of use, 100% functional, scope of delivery as per photos Lsdpfx Aeulqg Njiwsab

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Lsdpoxwl Tzjfx Aiwoab Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Ljdpfxsxwl N Aj Aiwoab Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales Lajdpjxwlmujfx Aiwsb - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06-00376, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 150 mm, control type: CNC control, TECHNICAL DETAILS Measuring range X-axis: 400 mm Measuring range Y-axis: 400 mm Measuring range Z-axis: 150 mm Measurement accuracy: Length measurement deviation up to approx. 1.5 µm MACHINE DETAILS Control: CNC Software: WinWerth, version 8.40 or higher Tool holder / probe: Renishaw, MK 2 Probe system: Renishaw Probe Interface PI 200 Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A Lajdpeyft Tmjfx Aiwob EQUIPMENT Granite machine with measuring glass and cover CNC control with scope controller Renishaw probe (various probe inserts included) PC workstation User manuals (WinWerth) Calibration and test reports Folder with machine and measurement room documentation Software and calibration data carriers (CD/DVD) Control cabinet integrated, main switch available

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, total length: 10,000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic rotary cutting - Double hydraulic clamping set for sheet metal clamping (short and long) Upper beam with water bending groove, oil filler, clamping and leveling material, emergency stop rail along the entire length of the machine, emergency stop actuation integrated into the pedal for the upper beam and bending beam, a second pedal for two-person operation, a safety device for the upper beam, two clamping fingers for short pieces Lodpfx Aiewnyu Djwsab The machine is repaired, inspected, and cleaned by a specialist and is fully operational. A functional test will be performed. Sheet metal width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm VA sheet thickness: 1.5 mm Back width: 150 - 1150 mm Color: Light blue/light gray Total power requirement: 400 V Space requirement: 12,500 x (2,367 x 700) + 2070 mm fence Insertion depth: 1150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/sec Number of uprights: 8 Number of clamping jaws: 8 Bending angle: 145 degrees

Condition: used, Year of construction: 1999, Table size 1550 x 500 mm Grinding area 1550 x 500 mm Speed on the table 5-25 m/min Wheel dimensions 406 x 50,8 x 127 mm Max. table load 1200 kg NC-controlled grinding cycle NC-controlled stone dressing Equipped with: 3 stones w/hubs Magnetic chuck Lodox Itaaepfx Aiwjab Balancing stand for stones

Condition: good (used), In this offer you buy a used cutting plotter "Mimaki CJV150-75" Item for sale: 1 x Mimaki CJV150-75 with the following equipment: incl. 8 ink colour printing system incl. special colours: orange, white and light black - Print head must be replaced Lodpfx Aiehg Amaewsab Condition: This is a used machine and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function A test printout can be seen in the photo. For more information you can of course contact us personally. Shipping is possible on request!

Condition: used, functionality: fully functional, With this offer, you are purchasing a used large format printing system/plotter ‘Mimaki TxF150-75’. Item for sale: 1 x Mimaki TxF150-75 with the following equipment: incl. Schulze Powder Machine 600 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: Ledpoylud Tjfx Aiwjab You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2000, turning diameter 500 mm turning length 1500 mm control MONFORTS CONTROL control SYSTEM MTC-K turning diameter over bed slide 290 mm spindle bore 70 mm spindle turning speed range 3 - 2800 U/min spindle power 15 kW max. torque on the spindle 1530 Nm spindle head DIN 55027 Gr. 8 feed power X/Z axis 11300 N rapid travel - longitudinal/face 10 / 5 m/min Laedpfxovh Ncro Aiwob bed width 360 mm travel of cross-slide 265 mm upper slide travel 140 mm turning tool - shaft cross cut 32 x 25 mm tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock taper MT 5 weight of the machine ca. 3,3 t dimensions of machine L x W x H 3,45 x 1,65 x 1,93 m Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant

Condition: ready for operation (used), Siemens 1FK7063-5AF71-1AB0 synchronous servo motor SN:YFW350150101002, used, normal signs of use, 100% functional, scope of delivery as per photos Lsdpei D Rpkjfx Aiwoab

Condition: ready for operation (used), Mitsubishi HA33NC-S servo motor SN:15017 + OSA253S2 encoder SN:J4AVU492R6S ,used, normal signs of wear, 100% functional, scope of delivery according to photos Laedpfx Aiei D I Rgswob

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 18,972 h, machine/vehicle number: 363/11, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 150 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of upper roll: 130 mm Diameter of lower rolls: 150 mm MACHINE DETAILS Lsdjy Hhwqepfx Aiwjab Control: CNC Drive: Hydraulic Number of rolls: 4 Number of driven rolls: 4 Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,200 x 1,200 mm Transport weight: 2,000 kg Transport packages: 2 Operating hours: 18,972 h EQUIPMENT Cone bending CE marking

Condition: excellent (used), Year of construction: 2024, operating hours: 3,540 h, functionality: fully functional, punching force: 280 t, X working area max.: 3080 mm Y working area max.: 1540 mm Lodpfx Ajy N Dwreiwjab Operating hours: 3540 hrs Control: CNC control LABOD with graphics Standard equipment Hydraulic punching machine - Punching force: approx. 280 kN (28 tons) - Throat depth: approx. 1750 mm - Max. punching diameter: 70.0 mm - Max. stroke height: 90 mm, steplessly programmable up and down via control - Table width left + right: 3430 mm each - Table depth: 3160 mm - Table height: 900 mm + 8 easily exchangeable cassette holders + Rotary drive, tool holders top and bottom continuously rotatable 360° + 1 piece, indexable Revotool tools + Programmable clamp positioning + Scrap slug extraction system + Spray device + Brush table + Brush table extension tables + Multitalk, USB, SD memory card and network connection + Digital stroke height adjustment + Three-sided safety light barrier + Various intermediate matrix plates for Trumpf tooling sizes 1 and 2 + Tooling package + 1 set of keys and operating manuals + Boschert EasySharp tool grinding device