Used Holz-Her Panel Saw Holz-Her 1255 - Used - for sale (58,558)

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retracting shifting grid, stable latching of the saw carriage at both top and bottom, latch monitoring in vertical cut electrically controlled, foldable plunge lever on the saw unit, retractable riving knife for cut-outs, operator panel at eye level, digital display on the longitudinal fence, digital display for horizontal cut, strip cutting device, roller lift transport system, trim-capable support surface, Fodpeyyzp Hefx Adcjph dust extraction device TRK, dust-tested. ----- Technical Data ----- Cutting length: 5200 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Required space (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Quality Information: - Fence strips replaced / refurbished - Comprehensive basic inspection - Complete basic cleaning - Electrical system checked - Immediately operational

Condition: excellent (used), Panel Saw HOLZ-HER 1255 SECTOR pro – used – • Welded frame with extremely high rigidity • Pneumatically retractable support grid • Sturdy saw carriage latching mechanism at top and bottom • Electrically monitored latching in vertical cutting mode • Foldable plunge lever on the saw unit • Retractable riving knife for cut-outs • Operator control panel at eye level • Digital display on longitudinal fence • Digital display for horizontal cut • Strip cutting device • Lift roller transport system • Trimmable support table • TRK extraction unit Fjdpoy N Rihjfx Adcsph • Dust tested • Only used for 2 months ----- Technical Data ----- Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 60 mm Saw blade Ø: 250 mm Motor: 4 kW Extraction port Ø: 120 +100 mm Compressed air: 8 bar Year of manufacture: 2025 Quality info: - Complete basic inspection - Complete basic cleaning - Ready for immediate use

Condition: used, Year of construction: 2002, total length: 5,050 mm, total width: 2,420 mm, total height: 800 mm, Colour: Grey Fjdpfjzcng Nox Adcoph Weight: 750 kg - Details: - └ Description: Digital readout does not function. - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 221 / 0-206 - Max. cutting height vertical [mm]: 1950 - Max. cutting height horizontal [mm]: 1900 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 50 - Max. saw blade diameter [mm]: 300 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 5050mm x 2420mm x 800mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Fpedpfx Aju R Syisdcoh Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data Cutting length: 5300 mm Cutting height: 2200 mm (edging height 2110 mm) Cutting depth: max. 60 mm Extraction system: - Saw unit: 120 mm - Frame end: 100 mm Fodpfx Adoy Scl Tjcoph Workpiece support: - Stable plastic support for optimal stability, also suitable for narrow workpieces. - Chips are removed via diagonal slots. Roller transport system: Manual for easy and gentle material handling Indexing: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Saw blade: Carbide (HM), 250 mm, hollow ground, 48 teeth Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding rail: incl. workpiece support for narrow parts (5 positions) with strip stop with Supercut scoring unit Extraction system according to BG guidelines TRK (below 2 mg fine dust / m³ air) Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 The machine will be completely overhauled Equipment and technical data: Cutting range: Cutting length: 4300 mm Cutting height: 2100 mm Cutting depth: max. 60 mm Extraction: Saw unit: 120 mm Frame end: 100 mm Workpiece support: Stable plastic support ensures optimal positioning even for narrow workpieces Chips are conveyed away through slanted slots Fpsdpfx Adoyxx U Deceh Lifting roller transport system: Manual operation for smooth and material-friendly transport Indexing: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Carbide-tipped, 250 mm, alternate top bevel, 48 teeth Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding rail: Including workpiece support for narrow sections (4 fields) With strip stop Extraction system according to BG guidelines TRK (below 2 mg fine dust per m³ air) Dimensions: approx. 5,100 x 1,100 x 2,600 mm Weight: approx. 1,100 kg Availability: by arrangement Location: 63934 Röllbach

Condition: excellent (used), Panel saw HOLZ-HER Cut 70 6110 - used - PC control with optimization, scorer, automatic cut length detection, side pressing device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical data ----- Cutting length: 3900 mm, Cutting width: 3100 mm, max. cutting height: 70 mm, Number of clamping devices: 6 pieces, Feed rate saw unit max.: 0-70 m/min., Feed rate width guide max.: 25/70 m/min., Motor power main saw: 11 kW, Motor power scorer: 1.1 kW, Saw blade main saw Ø: 350 mm, Saw blade scoring saw Ø: 180 mm, Extraction port Ø bottom: 120 mm, Extraction port Ø on the pressure beam: 3 x 120 mm, max. fuse rating: 35 A, Rated current of the largest consumer: 20.6 A Quality information: - Saw spindle newly bearinged - Scorer newly bearinged - complete basic inspection - complete basic cleaning - electrical system checked Fjdsyu N Rgepfx Adceph - ready for immediate use

Condition: used, Year of construction: 1987, total length: 4,300 mm, total width: 1,350 mm, total height: 2,550 mm, Colour: Grey Weight: 1.250 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 1454/8- 75 - Max. cutting height vertical [mm]: 1900 - Max. cutting width [mm]: 3300 - Min. saw blade diameter [mm]: 100 - Horizontal cutting: Yes - Vertical cutting: Yes Fodsw Rm Inepfx Adcsph - Transport dimensions: 4300mm x 1350mm x 2550mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2021, Used machine Fjdpfeyuld Ajx Adcoph Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Fully automatic vertical machine, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Fpodox Rr D Aopfx Adceh Saw blade diameter 300 mm, Control for vertical and horizontal cuts, with ALU folding stops and ALU center support, with SUPER-CUT scoring unit Motor 3 kW - 400 V Availability: short-term Location: Röllbach

Condition: excellent (used), Panel Saw HOLZKRAFT SI400es - used - Scoring unit, tilt-able, parallel fence with fine adjustment, outrigger table, speed display, angle/miter fence, overhead guard (narrow and wide), automatic brake, dust-tested ----- Technical Data ----- Fpjdpfjy Dhukox Adcsh Tilting range: 0-45°, carriage length: 3,200 mm, cutting width: 1,270 mm, cutting height: 130 mm, max. saw blade diameter: 400 mm, scoring saw blade diameter: 120 mm, crosscut fence extendable up to: 3,200 mm, miter fence tilting range: 0-45°, speeds: 3,500/5,000 rpm, motor power: 7 kW, scoring motor power: 0.55 kW, table height: 900 mm, extraction port diameter: 120/80 mm, dimensions (LxWxH): 3,650 x 2,000 x 1,600 mm, weight: 630 kg Quality Information: - Sliding table checked / readjusted - Clearance cuts checked / readjusted - Set to manufacturer's specifications - Brake checked - Complete basic inspection - Complete basic cleaning - Electrics checked - Ready for immediate use

Condition: ready for operation (used), Year of construction: 2011, total width: 4,200 mm, total height: 2,900 mm, overall weight: 700 kg, Panel saw manufactured in 2011. This HOLZHER 1255 3858/1-101 features a maximum cutting length of 3,300 mm and a cutting height of 2,200 mm, providing versatile cutting capabilities. With a powerful 4.0 kW saw motor and integrated control system, it ensures precision and efficiency. Consider the opportunity to buy this HOLZHER 1255 3858/1-101 panel saw. Contact us for further details. • Cutting capacity: horizontal 3,300 mm; vertical 2,200 mm; cutting depth 60 mm • Saw motor power: 4.0 kW • Electrical: 400 V, 50 Hz • Blade diameter: 250 mm • Blade speed: approx. 5,450 rpm • Cutting directions: vertical and horizontal • Angle cutting device: 0°, 22.5°, 45° • Dust extraction interface: port diameter 120 mm; required capacity approx. 1,400 m³/h • Control system: Integrated HOLZ-HER control (electronic positioning system) • Safety equipment: full blade guarding; two-hand safety control; mechanical hold-down system Dimensions Fodey Nxkyopfx Adcsph Machine Depth 1600 mm

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 226/0-206, Max. cutting length 4,300 mm, Fjdpfxewgm Ihj Adcjph Max. cutting height (vertical) 2,100 mm, Max. cutting height (horizontal) 2,010 mm, Max. cutting depth 60 mm Motor 4 kW Max. circular saw blade diameter = 250 mm, Extraction nozzle diameter = 120 + 100 mm Max. installation dimensions 5,080 x 2,780 x 1,600 mm, Support rails have been replaced! --- Excluding transport and assembly of the machine --- Ex works in Seevetal, as seen, Subject to prior sale

Condition: excellent (used), Year of construction: 2022, • Cutting height 2200 mm x cutting length 4300 mm • Extraction to CE TRK Regulations CH 2200 (less than 2 mg of fine dust/m³ air) • Middle workpiece support - 4 zones • Sliding carriage 1255 for cutting height 2200 mm • Saw unit 4,0 kW, 5400 min-1, 400 V, 50 Hz incl. HW-saw blade Ø 250 x 30 x 3,2 mm, Z 48, Hohl-Dachzahn • Length stop (manual) with digital read out for vertical cuts. For middle workpiece support • Digital display for horizontal cuts at the control panel incl. electrical fine adjustment • 3 adjustable stop points in the saw beam for repeating horizontal cuts via stop point • Strip stop for repeating horizontal cuts, Scale in mm, max. strip height 650 mm • Narrow part device (2 pcs) Avoids tilting of workpieces • Super Cut scoring device: For scoring the surface of covered materials. • Cutting optimization Opti-Base V-Cut 1 pc 10ˇTouch-screen 1 pc Software machine 1 pc Software office- 1 place floating network license (Opti V-Base) 1 pc label printer Fpodpfx Asy Nmtcodcjh • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), HOLZ-HER ProMaster 7125 machining center - used Console machine, additional connections for pneumatic clamps, pneumatic workpiece stops with double-acting cylinders, pneumatic feeding aids, hardened, dust-protected prism guides, helical toothed rack and pinion drive (X-axis), ball screw spindles on Y and Z axes, network card for remote maintenance, switch cabinet cooling with heat exchanger, handheld control unit, C-axis, A-axis, rotating disc tool changer, incl. safety fence, incl. anti-fatigue mats, pendulum operation possible, ceiling laser for positioning suction cups / workpiece, central lubrication, manual, incl. material removal simulation ----- Technical data ----- Machining length (contour milling - radius) X: max 3,605 mm, Machining length (contour milling - radius) Y: 1,335 mm, max. travel speed X: 100 m/min, max. travel speed Y: 100 m/min, Fpedoy Uxxnspfx Adceh max. travel speed Z: 25 m/min, max. workpiece length X: 200 mm, Machine control software: CAMPUS HOPS, Main spindle motor power: 9.5 kW (S6), Main spindle speed: 1,000 - 24,000 rpm, Main spindle arbor: HSK 63, Spindle cooling: coolant, Drilling unit motor power: 3 kW, Drilling spindle arbor: M10, Morse taper 11mm, Number of vertical drilling spindles: 10 pcs, No. of horizontal double drilling spindles in X-direction: 1 pc, No. of horizontal double drilling spindles in Y-direction: 1 pc, Number of consoles: 6 pcs, Number of tools in changer: 18 pcs, Vacuum pump capacity: 140 m³/h, Extraction connection Ø: 250 mm, required volume flow: 5,300 m³/h, required static vacuum: 2,500-3,000 Pa, Compressed air connection: 6 bar, Compressed air consumption: 300 l/min, Dimensions incl. fence (L x W x H): 6,712 x 4,585 x 2,760 mm, Weight: approx. 3,800 kg Quality information: - complete basic cleaning - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications Fpsdpfx Aoy T D N Aedcoh - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: used, Frame clamping element (WS15) HOLZ-HER - used - ATTENTION: SET price for 4 pieces! Clamping cover type O, Clamping to console via toggle switch, Opening/closing via toggle switch ----- Technical data ----- Fodpfxjvtrk Ao Adcjph Clamping range: 40 - 115 mm

Condition: excellent (used), Machining Centre HOLZ-HER EVOLUTION 7405 -used- Continuous feed machining, 4-sided edge routing possible, integrated vacuum pump, automatic positioning of suction cups, hardened, dust-protected prism guides, ball screw drives on all axes, network card for remote maintenance, integrated control cabinet, control cabinet cooling with heat exchanger, manual control device, XL drilling head, saw unit for grooving in the X direction, pick-up tool changer, automatic central lubrication. ----- Technical Specifications ----- Fedpfx Adoyrp Srocsph Min. workpiece length X: 200 mm, Min. workpiece width Y: 70 mm, Min. workpiece thickness: 8 mm, Max. workpiece length X: 3,200 mm, Max. workpiece width Y: 920 mm, Max. workpiece thickness: 70 mm, Machine control software: CAMOUS HOPS, Main spindle motor power: 6.5 kW, Main spindle speed: 1,000 - 18,000 rpm, Main spindle interface: HSK-F63, Drilling unit motor power: 1.7 kW, Drill spindle interface: M10, H7 fit 11 mm, Number of vertical drilling spindles: 13 pcs, Number of horizontal double drill spindles in X direction: 2 pcs, Number of horizontal double drill spindles in Y direction: 1 pc, Saw blade diameter (saw unit): 120 mm, Number of tools in changer: 6 pcs, Extraction port diameter: 2 x 120mm + 1 x 140 mm, Required air flow rate: 4,100 m³/h, Required static vacuum: 2,500 - 3,000 Pa, Required air velocity: 30 m/s, Compressed air connection: 6 bar, Compressed air consumption: 300 l/min. Quality information: - complete basic cleaning - electrics checked - pneumatics checked - set according to manufacturer’s specifications - ready for immediate use

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, Fpodpfx Adsy Sazrjcoh digital readout on the longitudinal stop, digital display for horizontal cuts, strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, dust-tested ----- Technical Data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: excellent (used), Panel Saw ELCON ADVANCE 215 DSX-A - used - Automatic clamp system for trimming the lower edge, Pneumatically retractable support grid, Sturdy locking positions for the saw carriage at the top and bottom, Electrically monitored locking for vertical cuts, Retractable riving knife for cut-outs, Control panel positioned at eye level, Digital display at the longitudinal stop, Digital display for horizontal cuts, Scoring saw unit with counter-rotation, TRK extraction system, Certified dust extraction, Strip cutting device ----- Technical Data ----- Cutting length: 6,300 mm, Cutting height: 2,100 mm, Edging height: 2,000 mm, Cutting depth: 80 mm, Saw blade Ø: 300 mm, Motor: 4 kW, Extraction port Ø: 200 mm, Compressed air: 6-8 bar, Required space (LxWxH): 7,700x2,000x3,000 mm Quality Information: - Guide rails renewed Fjdpfxsyq Rwye Adceph - Complete basic inspection - Thorough cleaning - Electrical system checked - Immediately ready for operation

Condition: used, Panel saw ALTENDORF F45 - used - double roller carriage, tilting, Fjdpfow Nv I Usx Adceph parallel fence with fine adjustment, outrigger table, table extension, anodized aluminium, table width extension, anodized aluminium, mitre fence, overhead guard, narrow and wide ----- Technical specifications ----- Tilting range: 45°, Carriage length: 2,500 mm, Cutting width: 800 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Extraction nozzle Ø: 80 / 120 mm

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Fpodpfx Adsw Nx A Iocjh Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: excellent (used), Panel saw STRIEBIG COMPACT TRK 5207 C - used - Welded frame with extremely high rigidity, automatically retracting support grid, stable locking of the saw carriage at top and bottom, control panel at eye level ----- Technical data ----- Cutting length: 4,600 mm Cutting height: 2,070 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Motor: 3 kW Extraction connection diameter: 100 mm Required space (LxWxH): 5,716 x 1,500 x 2,814 mm Weight: 850 kg Quality information: Fpjdpfx Adjwyap Ejcsh - Folding support rails renewed - Fence bars renewed / overhauled - Complete basic inspection performed - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Condition: used, Year of construction: 2016, total length: 13,600 mm, total width: 2,450 mm, total height: 2,450 mm, Colour: Grey Price: On request Fodpfx Asx R A Ufodcoph - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 1600 - Max. cutting width [mm]: 4300 - Transport dimensions: 13600mm x 2450mm x 2450mm (l x w x h) - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Fpedpfev Nhg Ssx Adcoh Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection - new exhibition machine -