Used Hranmechanica Meat Pneumatic Press Pp 200 for sale (35,944)

Condition: new, Year of construction: 2025, functionality: fully functional, degree of automation: automatic, Pneumatic press for raw dried delicacies. Made completly of stailes steel. Powered by air- 6 bar Measurments: by client demands Gbodpfx Adjwqcbfecjp

Condition: like new (used), Pneumatic meat bin lift Lift is designed for loading the product placed in 200 l meat bins (type U-200) Material: Stainless Steel Model: 200 liter Unloading height: 1.240 mm Gbodpfxeinup De Adcjp Capacity: 200 liter or 300 liter Dimensions (LxWxH): 1.800x900x1.930 mm Weight: 250 kg.

Year of construction: 2025, condition: new, functionality: fully functional, MIXER FOR POWDERED INGREDIENTS/ PRODUCTS Gsdpfx Adex Dicajcjbp Serves mixing powdered products Made of stainless steel Pneumatic opening of the lid and the dispensing system Two stirring speeds TYPE- MPP 200 L/B/H- 1980 mm/1010 mm/ 1530 mm TOTAL VOLUME- 250 L

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Godpfx Ajzk Eqmodcjbp Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: new, Year of construction: 2025, Vacuum mixer is designed for mixing crushed meat. Due to the freqency regulator to achieve speed control. The microprocessor control is by German company ADITEC. The working part is with spiral shape and paddles. TECHNICAL DETAILS: MODEL BM 300 Working volume 300 L/ 220 kg Instaled Power 3 kW Shafts speed frequency regulator Kind of shafts paddle Unload front valve Gsdpjwq D Rbsfx Adcobp Power 380 V 50 Hz Air power 6 bar L x B x H 1310 x 920 x 1500 mm.

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Gbjdpfxezca Uxs Adcsp

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PCM 200, total length: 1,650 mm, total width: 800 mm, total height: 1,900 mm, warranty duration: 12 months, type of input current: three-phase, power: 225 kW (305.91 HP), Hot air Pork crackling machine Here is the introduction of our pork crackling machine, as follows: Our pork crackling machine is produced from high quality AISI 304 stainless steel. The machine consists of stainless steel body, including inner drum with holes, which allow moderate distribution of hot air and even baking of the product. The operator may choose the time and frequency of the drum rotation with the help of the Frequency regulator and the German company Aditec control. The drum rotation can be according to the product types and time frequency control of the motor speed. The machine is wrapped with insulation, which fully ensure the safety of the operation of the workers, prevent burns. Our Pork crackling machine save manpower, reduce production cost, has easy paddle discharge system, perfect heating system, reliable electric control system, etc. Godpfsy Ex Eijx Adcsbp This pork crackling machine is a new type of energy-saving equipment that our company has developed for the characteristics of this type of the products. This is our pork crackling machine introduction, if you want to know more information about the pork crackling machine, feel free to contact with me.

Condition: new, Year of construction: 2025, Lifting device for meat trolleys 200 liters. Used for loading vacuum mixers, filling machines, and others. Made entirely of stainless steel - 1.4301. The execution can be left or right, and it can also be mobile. Gbedpfswqcgnsx Adcsp Installed power 0.75 kW. Maximum load capacity 300 kg. Dump height 150 cm. Weight 340 kg.

Year of construction: 2002, condition: used, Formaco meat former press Gbsdpfx Ajb Uaiyjdcjp Model: FLL800/160/1 Serial: 1100 2002, Stainless, Meat former press, votage/Hz 3x400/50, 16Amp

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the all-in-one solution for any application. Gedpfx Adoziivqjcebp The display is user-friendly. Intended use: This heat sealing press is particularly suitable for industrial applications where precise temperature control and the ability to use smaller sealing plates (140 x 140 mm) are required. Common applications include applying patches, transfers, or embroidery to textiles. Special features: Robust and durable: The machine is designed for intensive use and is popular in the textile industry as well as in other industries that require high volumes with medium to high temperature processing. High flexibility: The temperature range of 25 to 210 °C and the adjustable timer from 1 to 240 seconds offer flexibility for a variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat sealing press with the following technical specifications: Technical data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (millimeters): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine -Pneumatic cylinder: Festo type DC-100-050-PPV -Stroke: 50 mm -Holder: Ø approx. 9 mm -Dimensions: 350/200/H515 mm Gjdpfef Sa Rcex Adcebp -Weight: 31 kg

Condition: used, Pneumatische Buchpresse - pneumatic Book Press Kokkelink BP 40 1 Pressplatte  / 1 Press Palte Pressfläche / Press Size max. 400 x 400mm Gbodpex Rq Rusfx Adcsp Presshöhe / Press high max. 350mm Presshöhe stufenlos regelbar / Press high steppless adjustable Gewicht / Weight 250kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Gedpezbxwiefx Adcebp Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), CATALOGUE NUMBER 8008 TECHNICAL DATA - Number of clamping areas: 2 - Manually adjustable side clamps: 2 x 6 pcs - Pneumatic top clamps: 2 x 2 pcs - Max. length of bonded elements: 3000 mm - Max. height of bonded elements: 1000 mm - Max. thickness of bonded elements: 100 mm - Dimensions (L/W/H): 3000 x 1300 x 1650 mm - Weight: approx. 600 kg ADVANTAGES - Two working areas Gsdszkgyvspfx Adcobp - Bonding length: 3000 mm - Unpainted - Mobile – on wheels - Used press, very good condition Net price: 12900 PLN Net price: 3071 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), functionality: fully functional, a complete workstation with integrated pneumatic system. Gsdjzka Adspfx Adcobp featuring pneumatic two-hand release Force: 45 kN Stroke: 60 mm

Condition: excellent (used), CATALOG NUMBER 7993 TECHNICAL DATA - Loading fields: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs - Max length of glued elements: 2500 mm - Max height of glued elements: 1330 mm - Max thickness of glued elements: 110 mm Gbodpfszh H Egex Adcep - Guides for gluing thin elements - Dimensions (L/W/H): 3000x1350x2000 mm - Weight: 900 kg ADVANTAGES – Two working zones – Gluing length of 2500 mm – Pneumatic cylinders – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Schmidt 24-041-89 Pneumatic Press Gbedpfsxxaz Asx Adcep Pressing force: 9 kN Overtravel: 15 mm Two-hand operation Max. operating pressure: 9 bar Stroke: 50 mm You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, net invoicing is possible, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Stated company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description are possible and remain reserved.

Condition: ready for operation (used), Schmidt 32-151-01 Toggle press PressControl 60 Compressive force: 15 kN Stroke: 40mm Follow-up time: 0.07 sec Overtravel: 15mm PressControl 60 Two-hand operation Gbodpfx Aeulf A Eodcop You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Hertweck P4 hydraulic press stamp press You are welcome to come by for a viewing. We are happy to organize a cost-effective shipping company for you! Gedpfxevux Spo Adcobp You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: as good as new (ex-display), Year of construction: 2026, Horizontal Bending press Zopf - model T 200 with automatic backgauge - programable backgauge 1000 mm with - year of construction 2026 - demo model - length of stroke 185 mm - weight 500 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 100 mm Gbedpfx Adogrydbecsp Touch screen with programming of the stroke and backgauge demo model

Condition: like new (used), functionality: fully functional, Press No. 35 – 173 - 98 Year of manufacture 1998 Gbodpfezibcpjx Adcop Max. stroke 60 mm Pressing force 45 kN Max. operating pressure 6 bar

Condition: excellent (used), Year of construction: 2020, General Description For sale: 6 hydraulic presses, model YL32-200. These are robust four-column presses, ideal for metal forming, pressing, stamping, bending, and general industrial uses. The machines were originally imported from China and are based on the widely used Y32 series, ensuring easy maintenance and worldwide availability of spare parts. ⸻ ⚙️ Technical Specifications (typical for YL32-200) * Press force: approx. 200 tons * Construction: 4-column hydraulic press * Stroke: approx. 400 – 700 mm * Table size: approx. 700 x 700 mm – 1000 x 1000 mm * Daylight (max. opening): approx. 800 – 1200 mm * Hydraulic pressure: up to 25 MPa * Motor power: approx. 7.5 – 15 kW * Control system: manual / semi-automatic * Power supply: 380V / 50Hz (industrial standard) * Weight per machine: approx. 5 – 8 tons ⸻ 🏭 Applications * Metal forming & stamping * Deep drawing * Straightening and pressing * Plastic forming * Workshop and industrial production Gedpfx Adey E Abnscjbp ⸻ 📦 Condition * Used condition * Sold as is / ex-works * Inspection possible by appointment ⸻ 📊 Availability * Quantity: 6 machines available * Sale as single units or as a package ⸻ 🚛 Logistics * Location: Germany * Loading possible (forklift or crane required depending on configuration) * International shipping can be arranged * Price per unit!! * Dismantling by buyer!! * Alternatively, dismantling can be organized at an additional cost!

Condition: good (used), Year of construction: 1999, Pneumatic press, manufacturer: SCHMIDT, type: ZHS-2/22, year of manufacture: 1999. Gsdpfxeiduvcj Adcobp Two-hand operation. UVV certification valid until 2023.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 165236.1, Offer 25418 Technical data: - Pressing force approx. 110 kN - Working stroke approx. 50 mm - Force stroke 12 mm - Overhang approx. 150 mm - Table size 280 x 180 mm - Adjustable installation height up to max. 300 mm - 2 manual controls - Air inlet 6 - 8 bar - Total space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg Gbodpfx Ajzfh Hysdcsp

Condition: used, Year of construction: 2005, pressure 30 t Stroke 190 mm distance between columns 440 mm side window 450 mm daylight (max. stroke up, adjustment up) 350 mm table surface area 595x450 / 440x595 mm table height over floor 725 - 900 mm table adjustment range 175 mm ram surface 90 mm Gbjdoyfwvrjpfx Adcsp power requirement 0,5 kW Weight 1,20 kg dimensions (WxDxH) 1,5 x 1,0 x 2,9 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck Basic unit power pack K 30.181-190.10 with stroke limitation, anti-rotation protection, universal underframe UUM 1-200.031, adjustable working height Total stroke 190 mm / power stroke 10 mm