Used Huk Brake Gear for sale (24,283)

Condition: used, functionality: unexamined, Ferwood Code: RU0009347 - Manufacturer Code: 31320008 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Fgedpsv Hrpfsfx Aggsg

Condition: excellent (used), rotational speed (max.): 55 rpm, type of input current: three-phase, Geared motor, drive motor wiht brake several pieces for sale from stock. Manufacturer electric motor ziehl abegg RFZU180 Manufacturer Gear Sew-eurodrive S92 LP180 Output 1.42 / 8.5 kw Speed 8/55 brake - Bevel gear Protection IP 23 -Weight 350kg Purchase, Acquisition, asset management of industrial equipment and machinery. Fjdpfodyd Nxsx Aggegg Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), functionality: fully functional, Due to the closure of our sawmill, we have various machines and accessories for sale (see pictures). If you are interested, please do not hesitate to contact us. - 45 kW motor for Hacker (models 1-3) - New knife set for root reducer (no pictures available) - Gear wheels / brake discs for Heden forklift trucks (4+5) – forklift trucks are not for sale. Fodpfxeyi Erpo Aggegg

Condition: excellent (used), For sale: SEW-EURODRIVE RF17 DT63L4/B03 geared motor with a three-phase motor with a power of 0.25 kW and a built-in electromagnetic brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good. Normal signs of use resulting from operation are visible. The scope of sale includes exactly what is shown in the pictures. Fedpeznn E Iofx Aggegg Technical data: Manufacturer: SEW-EURODRIVE Model: RF17 DT63L4/B03 Power: 0.25 kW Supply: 3× 230 V Δ / 400 V Y, 50 Hz Motor speed: 1300 rpm Output speed: 94 rpm Torque: 25 Nm Gear ratio: i = 13.84 : 1 Brake: 230 V AC, 3.2 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Design: IM B5 Weight: 10.84 kg Country of manufacture: Germany

Condition: used, Synchronous servomotor with holding brake and gearbox, Gear motor, electric motor, right-angle gear motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanent magnet synchronous servomotor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 14.51 kW Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Stall torque M0: 83.4 Nm Rated current In: 31.5 A Stall current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, single pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole terminal box - Resolver connection, 12-pole terminal box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 718690 Art. No.: Rated voltage: 24 VDC Rated current: 4.5 A Fgodpfx Aof Dlzueggeg Rated power: 108 W Braking torque: 65 Nm Right-angle gearbox WESTFALIA Systemtechnik Hollow shaft output: inner Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Shaft also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting holes on the gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg Good condition

Condition: excellent (used), For sale: SEW-EURODRIVE R40 DT80K4/BMG geared motor with a three-phase electric motor and built-in electromagnetic brake. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. Normal signs of wear resulting from use are visible. The geared motor is ideally suited for driving conveyors, feeders, production machines, and other industrial equipment. Technical data: Manufacturer: SEW-EURODRIVE Gearbox type: R40 Motor type: DT80K4/BMG Power: 0.55 kW Power supply: 3×230 V Δ / 400 V Y, 50 Hz Fjdpfoznu Ipox Aggjgg Motor speed: 1360 rpm Output speed: 53 rpm Brake: 230 V AC, braking torque 5 Nm Protection class: IP54 Insulation class: B Weight: 20.12 kg

Condition: used, Synchronous servo motor with holding brake and gearbox, gear motor, electric motor, bevel gearbox motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8015 Machine type: Permanent magnet synchronous servo motor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 12.13 kW Rated speed: 3000 rpm Rated torque Mn: 38.6 Nm Stall torque M0: 61.5 Nm Rated current In: 26.6 A Stall current I0 / I0max: 41 / 164 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft end with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole connection box - Resolver connection, 12-pole connection box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 717173 Art. No.: 228-00043 Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 160 Nm Bevel gearbox WESTFALIA Systemtechnik Shaft end output: Ø 60 mm with key Shaft end length: approx. 120 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Fgedpfxjf Dlzqj Aggog Gear ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on the gearbox 180 x 180 mm / 180 x 230 mm - Gearbox with triple chain sprocket, outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm Total weight: 175 kg good condition 2 units available, price per unit.

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T geared motor with a three-phase DR63M6/BR/TH motor and an integrated 24 V DC electromagnetic brake. The unit is 100% functional, tested, and ready for operation. Before sale, the geared motor was thoroughly inspected and operates flawlessly. The motor housing has some broken cooling fins, which are clearly shown in the pictures. This damage is purely mechanical and does not affect the proper operation, performance, or reliability of the unit. Apart from that, the geared motor shows normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×230/400 V AC, 50 Hz Motor speed: 900 rpm Output speed: 15 rpm Gear ratio: i = 60 Torque: 32 Nm Electromagnetic brake: 24 V DC Protection class: IP54 Insulation class: F Fjdpeznaq Nofx Aggjgg Rated current: 1.00 A (230 V Δ) / 0.57 A (400 V Y) Power factor (cos φ): 0.65 Duty cycle: S1 Weight: 9.46 kg

Condition: excellent (used), SEW Eurodrive RF73DT80N-4BM gear motor 0.75 kW 1380/31 rpm B5 with brake Fedpfx Agjywn Ukogsgg

Condition: excellent (used), For sale: SEW-EURODRIVE R40DT71C2BMG/Z geared motor with a three-phase electric motor and integrated brake. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good – normal signs of use resulting from operation are visible. This robust geared motor is ideally suited for driving industrial machinery, conveyors, feeders, mixers, and production lines. Technical specifications: Manufacturer: SEW-EURODRIVE Type: R40DT71C2BMG/Z Fodpfx Asznd Nieggogg Motor power: 0.37 kW Motor speed: 2700 rpm Output speed: 43 rpm Power supply: 230 V Δ / 400 V Y Frequency: 50 Hz Current: 1.65 / 0.96 A Cos φ: 0.91 Protection class: IP54 Insulation class: F Brake: 400 V AC Brake torque: 2.5 Nm Mounting position: IM B8 Weight: 19.24 kg Gear lubrication: Mineral oil CLP220 Country of manufacture: Germany

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle mount: MK 3, Meyer Geared Head Pillar Drill Model:SR25 Spindle Taper: No 3 Morse Spindle Speeds:125-2825 RPM Table Area:350 x 400mm (Hand rise and fall / Swivel) Throat:240mm Fgedpfx Ajzrnndsggeg Motor: 0.75 KW With: Chuck Guard Safety Brake Low-Voltage Light Dimensions: 700 x 450 x 1900mm High Weight: 400 KGS

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Fsdpfozwcl Uex Aggegg Weight: approx 4 T

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 347 kg, torque: 8,000 Nm, SEW Eurodrive KH107/T DRN132S4/BE11HR/ASE1/TF Manufacturer: SEW Eurodrive Type: KH107/T DRN132S4/BE11HR/ASE1/TF Serial Number: 01.8125801502.0001.22 Technical Data Speed [rpm] 1461 / 12 Total gear ratio [i] 121.46 Max. torque [Nm] 8,000 Output torque [Nm] 4370 SEW service factor 1.85 Mounting position IM M4B ISO designation CLP 220 Lubricant type Mineral oil Lubricant quantity [l] 31.50 Motor power [kW] 5.5 Motor frequency [Hz] 50 Duty cycle S1-S10 S1 Motor voltage [V] / Switching method 230/400 Delta/Star Rated current [A] 18.20 / 10.50 cos phi 0.84 Thermal class [°C]/Protection class [IP] 155(F) / 54 International efficiency class IE3 Efficiency (100% Pn) [%] 89.6 Efficiency at 50/75/100% Pn [%] 90.6 / 90.6 / 89.6 Ambient temperature min. [°C] -20 Ambient temperature max. [°C] 40 Brake voltage [V] / Brake torque [Nm] 400 AC / 80 Brake rectifier TS BGE1.5 Nameplate: German Weight 347.00 kg SEW Eurodrive gear motors – various types immediately available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideal for use in machinery and plant engineering, in conveyor technology, and for numerous industrial applications. Available types 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor speed: 1,461 / 12 rpm Total gear ratio: i = 121.46 Max. permissible torque (Ma max): 8,000 Nm Output torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Incl. decentralized inverter: DFC20A-0055-503-A-T00-001/B Drive speed: 2,900 rpm Output speed: 33 – 1.6 rpm Total gear ratio: i = 88.97 Max. permissible torque (Ma max): 1,550 Nm Output torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total gear ratio: i = 57.28 Max. permissible torque (Ma max): 820 Nm Output torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total gear ratio: i = 108.29 Max. permissible torque (Ma max): 600 Nm Fjdpfezrbgmox Aggegg Output torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Incl. decentralized inverter: DFC20A-0020-503-A-T00-001/B Drive speed: 2,900 rpm Output speed: 30 – 1.5 rpm Total gear ratio: i = 97.81 Max. permissible torque (Ma max): 200 Nm Output torque: 177 Nm General information Manufacturer: SEW-EURODRIVE Robust industrial quality Various power and torque ranges available Some with integrated decentralized frequency converter (DFC) Ideal as a replacement drive or for new projects If you are interested, we will gladly send you further information, photos or the nameplates of the individual drives. An inspection can also be arranged upon request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Fjdpfx Agszy Ndcsgogg Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: like new (used), Year of construction: 2022, power: 2.2 kW (2.99 HP), SEW Eurodrive KH77 DRN90L4/BE2/DI/DFC/IV Manufacturer: SEW Eurodrive Type: KH77 DRN90L4/BE2/DI/DFC/IV Serial Number: 01.8125801513.0001.22 Technical Data Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed [rpm]: 2900 Output Speed [rpm]: 33 - 1.6 Total Gear Ratio [i]: 88.97 Max. Torque [Nm]: 1,550 Output Torque [Nm]: 645 Service Factor SEW-FB: 2.40 Design: IM M1A ISO Designation: CLP 220 Lubricant Type: Mineral Oil Lubricant Quantity [l]: 2.10 Motor Power [kW]: 2.2 / 0.11 Motor Rated Power [kW]: 1,500 Motor Frequency [Hz]: 100 Mains Rated Frequency [Hz]: 50-60 +/- 5% Supply Voltage [V]: 3x AC 380 -5% to AC 500 +10% Mains Rated Current [A]: 5.00 Output Rated Current [A]: 5.5 Duty Cycle S1-S10: S1 Adjustment Range (VT): 1:20 Motor Voltage [V] / Switching Mode: 230 Delta Motor Mains Frequency [Hz]: 50 cos phi: 0.74 Insulation Class [°C] / Protection Class [IP]: 155(F) / 54 Fodozrdg Nopfx Aggjgg International Efficiency Class: IE3 Motor Mains Efficiency [%]: 85.6 Efficiency at 50/75% Pn [%]: 84.6 / 86.1 Ambient Temperature Min. [°C]: -20 Ambient Temperature Max. [°C]: 40 Brake Voltage [V] / Brake Torque [Nm]: 400 AC / 10 Brake Rectifier: none Nameplate: German Weight: 78.00 kg SEW Eurodrive Gear Motors – Various Types Immediately Available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideally suited for use in machinery and plant engineering, in material handling technology, and for numerous industrial applications. Available Types: 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor Speed: 1,461 / 12 rpm Total Gear Ratio: i = 121.46 Max. Permissible Torque (Ma max): 8,000 Nm Output Torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Including Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 33 – 1.6 rpm Total Gear Ratio: i = 88.97 Max. Permissible Torque (Ma max): 1,550 Nm Output Torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total Gear Ratio: i = 57.28 Max. Permissible Torque (Ma max): 820 Nm Output Torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total Gear Ratio: i = 108.29 Max. Permissible Torque (Ma max): 600 Nm Output Torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Including Decentralized Inverter: DFC20A-0020-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 30 – 1.5 rpm Total Gear Ratio: i = 97.81 Max. Permissible Torque (Ma max): 200 Nm Output Torque: 177 Nm General Information Manufacturer: SEW-EURODRIVE Robust Industrial Quality Various Power and Torque Ranges Available Partially with Integrated Decentralized Frequency Inverter (DFC) Ideal as a Replacement Drive or for New Projects

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, pressing force: 80 t, stroke length: 290 mm, operating speed: 90 mm/s, table height: 950 mm, throat depth: 1,000 mm, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, overall weight: 6,800 kg, controller manufacturer: Safan, controller model: TS1, working width: 2,550 mm, bending force (max.): 80 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, warranty duration: 3 months, control type: CNC control, actuation type: electric, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Fedpfjut S E Nox Aggjgg Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & Emergency hand pump Equipment: - Aluminum side walls - 8x tie-down points - Electric pump Net: €5,033.61 / Gross: €5,990.00 Article number: HUK230311711.01 Technical data: • Brand: Humbaur • Model: HUK 303117 • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 314 x 175 x 30 cm • External dimensions (LxWxH): 451 x 189 x 97 cm • Loading height of the floor: 67 cm • Permissible total weight: 3,000 kg • Unladen weight: 735 kg • Payload: 2,265 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side walls, anodized, double-walled • Aluminum side walls, anodized, double-walled • All side walls can be folded down and removed • Steel corner posts, removable • Option to attach tarpaulin frames, grid attachments, side wall extensions, or front wall extensions at all 4 corners • Stable eccentric locks • Full steel floor - extremely robust • Reinforced continuous V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts welded in continuously • E-hydraulics for tipping with battery in the box and cover • 71AH battery Fgjdszy Dvyepfx Aggjg • Battery is charged by the towing vehicle via a 13-pin connector (provided that all pins of the socket are connected) • External battery charging socket for 230V charger • 8 recessed tie-down points inside on the side edge (800 DaN/kg), TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • 13-pin connector • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel, centrally located _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to ask about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, center height over cross slide: 200 mm, overall weight: 865 kg, spindle mount: MK 3, spindle motor power: 5,300 W, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, complete with tool cabinet and various quick-change tool holders, collets, and 3 RÖHM chucks. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Condition: very good, fully functional Location: Graz (Austria) Highlights at a glance: - Center distance 1000 mm – ideal for longer workpieces Fgodpfeyxvqvsx Aggog - Stepless speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guides & gears - Electromechanical spindle brake - Very stable design – 865 kg machine weight - Safety monitoring via electrical limit switches - Equipped with a modern 3-axis digital display Technical data: - Center distance: 1000 mm - Center height: 200 mm - Turning diameter: 400 mm - Spindle bore: 50 mm - Speed: 40 to 3000 rpm - Spindle connection: DIN 55029 size 5 - Drive power: 5.3 kW - Tailstock diameter: 50 mm - Arbor: MK3 - Stroke: 120 mm - Dimensions (LxWxH): 1950 x 1060 x 1635 mm - Weight: approx. 865 kg Optional equipment: - Coolant system - 3-axis positioning display with 0.001 mm accuracy Scope of delivery: - 1 x EMCO EMCOMAT-20 D - 1 x Drawer cabinet with various tools, collets, etc. (see pictures) - 2 x RÖHM chucks (3 and 4-jaw chucks) - 6 x Quick-change tool holders (see pictures) - 1 x Complete manufacturer documentation (operating manual, wiring diagram, etc.) Quality & Safety: The machine impresses with the typical EMCO quality “Made in Austria”: Are you interested? Please contact us to arrange a viewing appointment or to request a quote.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Fgedozzrutjpfx Aggog Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Meter reading 41417 hours MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW - feeds in the X/Y/Z axes: 3070/1545/100 mm - dimensions of the work table (length x width): 3000 x 1500 mm - maximum weight of the workpiece: 930 kg Fgodowqr Twepfx Aggjg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm - laser type: CO2

Condition: excellent (used), Year of construction: 2014, operating hours: 443 h, Model Amada HFE MK2 80 x 2500 , 4 axis Hydraulic Downstroking Press Brake VERY LOW HOURS 443 Year 2014 Tonnage 80 tonnes Max. Bend Length 2500 mm Fgodpfozmtqasx Aggjg Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: good (used), mileage: 247,614 km, power: 163 kW (221.62 HP), first registration: 04/2004, fuel type: diesel, tire size: 295 / 60 / R22.5, axle configuration: 6x2, wheelbase: 5,670 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: air, number of seats: 2, total length: 9,450 mm, total width: 2,550 mm, total height: 3,800 mm, permissible axle load (axle 1): 6,700 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 6,700 kg, loading space length: 7,360 mm, loading space width: 2,410 mm, loading space height: 2,210 mm, Year of construction: 2004, Equipment: ABS, electric window regulation, power mirror, tail-lift, Technical information Number of cylinders: 6 Engine capacity: 5.480 cc Transmission Transmission: Volvo, 6 gears, Manual gearbox Axle configuration Tyre size: 295 / 60 / R22.5 Make axles: Volvo Brakes: disc brakes Suspension: air suspension Front axle: Max. axle load: 6700 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 60%; Tyre profile right outer: 60%; Reduction: single reduction Rear axle 2: Max. axle load: 6700 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Weights Empty weight: 9.429 kg Carrying capacity: 12.071 kg Fedpfx Aszzyc Esggogg GVW: 21.500 kg Functional Tail lift: Zepro, tail lift Make of bodywork: Becx Carrosserie Interior Interior: grey Condition Technical condition: good Visual appearance: good Number of keys: 1 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Radio/CD player - Speed limiter - Stability control - Visor

Condition: ready for operation (used), functionality: fully functional, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, The 3-phase 380V motor is running smoothly! Forward and reverse operation. Electronic motor brake. Fsdszkwfcepfx Aggjgg Geared headstock, gears running in oil. 9 adjustable spindle speeds from 52 to 2000 RPM. Metric lathe. Norton gearbox for easy thread cutting. Power feed in both directions, including cross-travel. Coolant pump. Emergency foot pedal. D1-3 camlock spindle nose. Dickson quick-change toolpost with a total of 4 toolholders. MT3 tailstock. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Contact us for shipping options! €4,150.00

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. Fgedpfx Aezzkwgsggsg A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 570602, travel distance X-axis: 300 mm, travel distance Y-axis: 400 mm, controller model: Siemens Sinumerik 840 C, swivel angle A-axis (min.): -170 °, swivel angle A-axis (max.): 170 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 400 mm A-axis: -170° to +170° X-axis speed: 0.1–5,000 mm/s Y-axis speed: 0.1–5,000 mm/s Workpiece diameter with 1:10 reduction ratio: 300 mm Workpiece diameter with 1:1 reduction ratio: 212 mm Maximum number of teeth: 200 Minimum number of teeth: 6 MACHINE DETAILS Control system: Siemens Sinumerik 840 C Total power requirement: 38 kW Fgodpezwmx Eefx Aggog Dimensions & Weight Space requirement: approx. 4,200 × 2,200 × 2,100 mm Machine weight: approx. 10,000 kg