3
flow: 2500 m³ / h
engine power: 1,05 kW
Noise level: 67 dB (A)
Dimensions W x D x H: 1040 x 508 x 595 mm
mass: 103 kg
Pp3fj
Connected load: 1.25 kW (230/400 V / 50Hz)
colour: gray RAL 7035
Suitable for cleaning cooling lubricant and oil-based grinding mist.
10
Filter element aluminium mesh 25 mm
Ionizer
Collector cell
Air performance: up to 2000 m³/h
Weight: approx. 90 kg
Supply voltage: 400 V / 3 Ph / N / PE / 50/60 Hz
Total current consumption: approx. 1.8 A
C0pslvx
Motor: 0,85 KW / ErP 2015
Noise level: approx. 66 dB(A)
Collector area: 12,9 m²
Unit dimensions: 1360 x 600 x 700 mm
Accessories: two stands
There are two identical units for sale.
The price refers to one unit each.
6
Suction- Tube: mm
Oil- drain- Tube: mm
dimensions: mm
air consumption: 600 - 1600 m³/h
filter surface area: ca. 11,5 m²
motor capacity: 0,75 kW
voltage: 400V / 3 Ph / PE / 50-60Hz V / Hz
Btojcozr3l
weight: ca. 85 ohne Untergestell kg
flow rate: m³/h
2
Extraction capacity: 1700 m³ / h
Exhaust fan: 380 V, 0.75 kW
Intake manifold Ø: 200 mm
Space required: 980 x 490 x 640 mm
Zc9209w
Weight approx .: 70 kg
6
liter capacity 1000 m³/ h
feed pressure 600 / 800 / 1000 Pa
Suction- Tube mm
total power requirement 1,5 kW
Gqaqddszq
weight of the machine ca. 350 Kg
dimensions of the machine ca. 1,8 x 0,8 x 1,2 m
15
Oil mist extractor
Manufacturer: Sara
Type: UC 2 SD
Year of manufacture: 2000
Space requirement: 600x420x1060mm
Weight: 80 kg
C0pb3kx
4
Specifications: Volume flow 900 m³/h, temperature max. 45°, motor output 1,25 kW, noise level 75 dB (A), connected load approx. 1.40 kW (400 volts / 50 Hz), dimensions w x d x h 1300 x700 x 400 mm, colour dark grey.
Suitable to clean / extract oil mist and emulsion mist. Fits on Walter Helitronic (R)-Power, Helitronic Power Regrinder and Helitronic Power Production.
Accessories:
B3voheos
Control lamp
3
Exhibition machine for sale at a good price!
HIGH PERFORMANCE OIL MIST SEPARATOR HPM 600
EXOMIST HPM oil mist separators are available in various sizes for use on almost any machine tool. The up to 4-stage filter system cleans the exhaust air with an efficiency of over 99%, even in high-pressure applications. The service life of the filters is usually several thousand operating hours. EXOMIST HPM can be equipped with filter packages for oil mist or emulsion mist. In addition, it can be retrofitt...
6
pipe system - processing diameter: mm
pipe system - inlet: mm
volume flow ventilator - shred: m³/h
flow rate: 1100 m³/min
filter surface area: ca. 11,5 m²
total power requirement: 0,75 kW
O7zuf
weight of the machine approx.: 65 kg
dimensions LxWxH: 1,0 x 0,5 x 0,55 m
The dirt particles produced during the machining of workpieces, such as emulsion mist, oil mist and smoke, are captured directly at the point of origin and pass through the individual filter stages of the extraction system.
Filter c...
Volume flow min./max .: 400/2000 m³ / h
Noise level: 69 dB
electr. Connection: 400 V, 880 W.
Extraction nozzle connection: 200 mm Ø
Required space: 720 x 450 x 1100 mm
Bp87podjo7
2
Air performance: 600 m³/h unit extraction rate
Buiimtu2zz
Colour: Light grey
Electrical connection: 3~, 230/400V ± 10%, D/Y 50/60 Hz
0,5 kW power supply 1,5/0,88 A, IP 54
Weight: approx. 50 kg
5
Manufacturer: Ventilatorenfabrik OeldeL/B/H: 50cm x 80cm x 170cmCondition: usedWeight: 100kgKw: 0,83Volt: 380Notes:The machine has a ceramic capacitor.
Hm9klu3f
2
flow: 1800 m³ / h
engine power: 1.75 / 1.9 kW
Connected load: 1.9 kW (230/400 V / 50Hz)
Bvagvl3j39
colour: gray RAL 7035
Suitable for CNC-controlled Walter machines of the type Helitronic Power Regrinder, Helitronic Prduction and Helitronic R-Power. Suitable for cleaning cooling lubricant and oil-based grinding mist. Accessories:
Silencer
5
Exhibition unit for sale at a low price!
The HPM 1000 is a high performance oil mist filter designed for strong atomization and long filter life. Ideal for machine tools with high pressure applications. Our exhibition unit is equipped with filters for oil and additionally has a HEPA H13 filter with efficiency 99,97% or 0,1µg/m³. The unit has a suction capacity of 1000 m³/hour.
The HPM 1000 is clearly different from low performance competitor products. It has 4+1 filter stages. All filters are mo...
6
Suction- Tube: 180 mm
Oil- drain- Tube: - mm
voltage: 400 V
filter surface area: 7,6 m²
: 1200 m³/h
total power requirement: 1,1 kw
weight of the machine approx.: 79 kg
dimensions of machine: 1000 x 700 x 600 mm
Other features
separators:
- filter chamber L: 520 x W: 420 x H: 520mm
- coarse filter L: 520 x W: 48 x H: 480mm (washable)
- fine filter barrel dia. 450x300mm, filter fleece mat
- covering W: 450 x H: 520mm via hinged flap
- suction opening Ø 180 x 45mm (floor)
Gxstord
- exhaust openn...
6
unused new oil mist suction oil mist separator
Bsooqifmct
DONALDSON / DMC-MMB
Volume flow: 1200 m³ / h
Filter area: 7.6 m²
Voltage: 400V
Total power requirement: 1.1 kW
Current: 2.4 A.
Dimensions of the system: L x W x H: about 1'000 x 600 x 600 mm
Suction opening: about 200 x 200 mm
Total weight: about 75 kg
6
200 Volt
50 Hz
0,75 kW
Paqxl
Serial No.: 10604
2
The oil mist separator VOMAT FA 240 EKSd was produced in 2013 in Germany.
Technical parameters:
- capacity: 550 l
- nominal filter capacity: 240 l / min
- filter unit:> 0.003 mm
- connection power: approx. 400 V / 50 Hz
Crrdcej
- dimensions (L x W x H): 1600 x 1000 x 1400 mm
- weight: approx. 1000 kg
Machine accessories:
- online connection for remote service
- integrated chillers: 13 kW
- additional tanks with a capacity of 260 l to receive 2 pumps supplying the machine
- sedimentator for aut...
2
Volume flow free suction: 1000 m³ / h
Connection piece: 200 mm
Ovq90gcp
Connected load: 0.30 kW (400 V / 50 Hz)
Noise levels: 68 db (A)
mass: 80 kg
weight: 80 kg
Dimensions L x W x H: 970 x 550 x 500 mm
colour: blue
Description: Suitable for cleaning cooling lubricant and oil-based grinding mist.
13
Extraction
No type plate available. There is no article number for the filters. Filters are reusable (you can clean them)
Fully functional
L x W x H
50x35x50 cm
Weight approx. 40 kg
Cf9qqwhk
6
Suction- Tube: 200 mm
Oil- drain- Tube: - mm
voltage: 400 V
filter surface area: 7,6 m²
: 1200 m³/h
total power requirement: 1,1 kw
weight of the machine approx.: 80 kg
dimensions of machine: 1000 x 700 x 600 mm
Bbzeda2xbh
Other features
separators:
- filter chamber L: 520 x W: 420 x H: 520mm
- coarse filter L: 520 x W: 48 x H: 480mm (washable)
- fine filter not available (must be bought)
- covering B: 450 x H: 520mm secured by hinged flap
- suction opening Ø 200 x 80mm (bottom)
- exhaust open...
5
Oil Mist Collecting and Regaining.
Bwvcxu9
MISCO is used for collecting and getting rid off the oil in the CNC machines cabin.
It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump
The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units.
The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of...
2
Standard equipment: Filter element aluminium knit 25 mm
Ionizer
Collector cell
Air performance: up to 2000 m³/h
Weight: approx. 120 kg
Supply voltage: 400 V / 3 Ph / N / PE / 50/60 Hz
Total current consumption: approx. 1.8 A
Motor: 0,75 KW / ErP 2015
Noise level: approx. 66 dB(A)
Fk8bcbf
Collector area: 12,9 m²
There are two identical units for sale.
The price refers to one unit each.
3
The NOVOTECNIC EUROPA FTD-6 E-39 Oil mist separator was built in 1992.
Technical parameters:
Bvci7gx2pi
- capacity: 2000 l
- nominal filter capacity: 500 l / min
- filter unit:> 0.003-0.005 mm
- connection power: approx. 15 KW
- machine dimensions (L x W x H): 4000 x 1200 x 2800 mm
- weight: approx. 2000 kg
3
complete device
Filter area: 0.18 m²
Air output 1100 m³/h
Btipw02a
conveying temperature 5-45 C°
Motor 1,45 kW-230/400V 50 Hz
3
Complete unit for heavy particle load
Gy7gvme30
Suction tube: 180 mm
Power supply voltage: 230 V.
Filter surface: 6,0 m²
Air volume 1000 m³ / h
Total power requirement: 0,3 kW
Machine weight approx.: 78 kg
Filter chamber L: 360 x W: 510 x H: 500 mm
3 inserts with - pre-filter (stainless steel knitted) 500x370x20mm
Ionizer / collector cell 500x370x210mm
After filter (stainless steel knitted) 500x370x20mm.
There are three identical units for sale.
The price refers in each case to a device.
3
complete device for heavy particle load
Air volume max. 2200 m³/h
Filter area 15 m²
Weight 145 kg
Motor 0.75 kW, 400 V, 50 HZ, PE
Puew0u
3
complete device
Bil7vsflpu
Air capacity 1100 m³/h
Conveying temperature 5-45 C
Motor 1,45 kW-230/400V 50 Hz
Used Oil fog separator
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Photo gallery: the 10 strongest forklift trucks in the world
Photo gallery: The World's 10 biggest excavators
Machineseeker still biggest sponsors of 2nd German football league
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
Olympic Games: Machineseeker sponsors Team Germany
