Used Hydrotechnik Dual Pressure Tester for sale (16,135)

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester Dsdpfjyccvfsx Anzjkr -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c Dsdpfjxt H Hhjx Anzekr - Year of manufacture: 2017 - Technical data: > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) > Pressure resolution: 0.1 kPa > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) > Precision data: > Repeatability: ±0.3 kPa (0.04 psi) > Reproducibility: ±0.7 kPa (0.10 psi)

Condition: good (used), Pressure testing device, measuring device -with trailing-pointer Djdpfxob A Rlyo Anzjkr -Max. pressure: 20 bar -High-pressure hose -Dimensions: 400/160/H200 mm -Weight: 4 kg

Condition: good (used), Analyzer, vapor pressure tester, Minivap VPS Dkodpfx Answbd Twezor -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 Dkedpfey D Hy Eex Anzor • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: new, Year of construction: 2024, functionality: fully functional, PTR1600L Carmec Pressure tester for cylinder head and block - new machine Hydraulic tray lifting, motorized tray rotation. Max. cylinder head dimensions: 1350 mm x 300 mm × 395 mm Max. cylinder head weight: 300 kg Adjustable pressure air test: 0 bar -10 bar Adjustable working temperature: 0 - 90°C Stainless steel tank capacity: 540 Liter Heating power: 2× 4,0 kW Hydraulic unit power: 0,75 kW Rotation motor power: 0,18 kW Maximum vertical travel distance: 600 mm Up and down travel time: 10s Rotation speed: 4 RPM Supply voltage: 220-440V 3Ph+E ( +/- 10% ) Frequency: 50-60 Hz Operating voltage: 24 V AC Empty tank: 440 kg Dksdpfx Asu S Eqnenzjr Machine dimensions: 2050 mm × 1120 mm × 1650 (max. H) mm If you are interested, please contact me! More machines for sale: Berco, Comec, A-M, Carmec, Kwik-Way, Serdi, PEG Connecting rod boring, cylinder boring, honing machines, valve seat milling, parts washer, valve grinder, line boring, valve guide press machine, pressure test bench, resurfacer, vacuum tester, valve spring compressor, crankshaft polisher machines

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Dkodpezma Tbofx Anzor Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Dkjdezma Skspfx Anzjr

Condition: like new (used), TECMA SEALED CUPS DUAL PACKER x2, x4, x6 PACK CARTON Dkodpfxjyrx Uvo Anzsr YOM 2013 AS NEW CONDITION MADE IN FRANCE

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Dkjdpfxjtrdyrs Anzor Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter Dedpfx Ansywcr Djzokr carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Dksdeywcrwopfx Anzsr Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Dkjdpfx Anjfz Dvvjzjr ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Dsdpfxefz Ax Se Anzskr User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Dksdpfsflpmqsx Anzjr • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Dkjdpfsfzrapsx Anzor Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Dsdpfefz A D Nsx Anzekr • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, This listing is for 1 of 3 Parker SciLog SciPres Pressure Monitor. The unit is in full working condition and is ready for immediate release Dsdpfjxxycysx Anzskr The Parker SciLog SciPres Pressure Monitor is a pre-calibrated, single-use pressure sensor specifically engineered for biopharmaceutical applications. It seamlessly integrates advanced pressure sensing with disposability, offering a hassle-free setup that enhances operational efficiency in critical environments. Key Features: - Pre-calibrated Sensors: Each sensor comes pre-calibrated for immediate use, simplifying setup and reducing error risks. - Unique ID for Traceability: Each unit is pre-programmed with a unique identification number, enabling thorough traceability and data documentation through the SciLog® SciDoc software. - Integrated Calibration Data: Calibration and identity information are stored on the sensor's chip for easy access and validation. - Simultaneous Inputs: The monitor can display inputs from up to three SciPres pressure sensors at once, providing comprehensive monitoring. - Pressure Calculations: It calculates and displays both trans-membrane pressure (TMP) and differential pressure (dP) for enhanced process visibility. - Stability: Gamma-stable, NaOH stable, and autoclave stable, ensuring compatibility with various sterilization processes and chemical environments. Applications: - Filtration Processes: Ideal for monitoring pressure changes in filtration systems for efficient operation. - Chromatography: Supports precise pressure control, crucial for effective separation processes. - Reverse Osmosis: Ensures accurate pressure measurements for optimally functioning systems. - Fermentation: Monitors pressure conditions critical for bioprocessing and yield optimization. Additional Specifications: - Digital Display: Easy-to-read digital interface for real-time monitoring of pressure data. - Plug-and-Play Convenience: Designed for out-of-the-box use, allowing quick integration into existing systems without extensive setup.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, operating hours: 10,000 h, machine/vehicle number: 3936990, Equipment: all wheel drive, compressor, emergency stop, hydraulics, Complete MacFab Wet-Cast Concrete Panel Production Line and 29 steel moulds. Comprehensive Mould Package for the production of concrete sectional garages. Alternatively the moulds could be altered to produce products in a variety of sizes, shapes, textures and colours. Dsdpfxezndccj Anzskr Excellent / In Perfect Working order In daily operational use. Available for live operational viewings. Location: United Kingdom Terms: Ex Works (EXW) – Buyer to arrange decommissioning and transport. Overview, An exceptional opportunity to acquire a complete, turnkey precast concrete panel manufacturing setup from industry-leading manufacturer MacFab. This system is not sitting in storage; it is currently in day-to-day production, meticulously maintained, and performing to perfect operational standards. Ideal for an established precast yard looking to rapidly scale capacity, or an agricultural/civil contractor looking to bring high-volume panel manufacturing in-house without the long lead times of ordering new plant equipment. Fully operational hydraulic systems, premium vibration consolidation setup, and robust chassis engineering. Regularly serviced and completely reliable. 29 Heavy-Duty Steel Moulds Included: A massive inventory of robust commercial steel panel moulds engineered for high-cycle wet-cast production. Excellent face-side finish quality and squareness. Complete Turnkey Solution: Includes all necessary integrated controls and ancillaries to begin pouring immediately upon reassembly Zero Operational Risk: Buy with 100% confidence. Because the machine is in active use, buyers can verify hydraulic integrity, vibration consistency, and overall cycle efficiency first-hand. Massive Mould 29 commercial steel moulds independently represents substantial capital expense and manufacturing lead time. This package provides immediate scaling capability. Live Video / Inspections Available: Serious buyers are invited to visit the facility to see the machinery running in real-time. PRICE £59950.00 Plus VAT 70270 Euros (Open to sensible offers for a swift transaction) Sold Ex Works (EXW).

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower -Manufacturer: Elektror, pressure blower radial fan type HRD 2/4T -Drive: 2.6 kW -Speed: 2860 rpm -Volume flow: 17.0 m³/min -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Protection class: IP 54 Dksdpfewncavjx Anzsr -Dimensions: 580/510/H515 mm -Weight: 38 kg

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Djdpfx Anozinzlszokr Weight 45 kg Good condition

Condition: good (used), Year of construction: 2002, Ingersol rand streamline plus waterjet intensifier pump. Dsdsnp Iywopfx Anzjkr good working condition

Condition: used, Year of construction: 1971, brinell hardness 250 kg Dedpfxsy Sih Ue Anzokr rockwell hardness 150 kg throat 125 mm checking height 200 mm weight of the machine ca. 0,07 t dimensions of the machine ca. 650 x 530 x 1550 m Tests possible by system Rockwell, Vickers, Brinell. This device is a used one. Therefore we sell it without warranty.

Condition: like new (used), 2021, 264 operating hours, like new Dksdpfey Aguajx Anzor

Condition: used, 100 × 72 × 12 mm Dkjdpjzrxprjfx Anzsr Technical data: - Available: 5