Used Imball Wrap Arround Clusterpacker for sale (840)

Year of construction: 1990, condition: like new (used), Make: Imball Type: Linear Hotmelt Cardboard Multipacker Model: Multipack 200R P340 Dx Serial number: 909080040 Year: 2001 Capacity: up to 180 multipacks per minute Tooling: Cans with a diameter of 73 mm, packed in groups of 3 (various package sizes possible: 1, 2, or 3 packs) Range: Can diameter 55-100 mm Can height 35-180 mm Frame: Aluminum / Steel, coated Lodpfxjfx R Rto Aazsrt Dimensions: L x W x H = 6500 x 1300 x 2600 mm Weight: 2500 kg Power: 380V 3P+N+E, 50Hz, 10 kW Air pressure: > 6 bar Features: Siemens PLC and touch panel

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: Lrsdezp H R Ejpfx Aazet New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REF: MM6428 1 x PFM flow wrapper with peg and chain infeed conveyor and painted mobile frame.  Manufacturer - PFM Packaging Machinery S.p.A. Model - Swift.  Date of manufacture - 2011.  Electrical requirements - 230 V / 50 hz / 1 phase. Power - 14.5 Amps / 3.1 kW. Overall dimensions - 4150mm long x 950mm wide x 1950mm high. Adjustable folding box - up to 90mm wide.  Can wrap using clear or printed film. Lrjdpfxey Unmus Aazst Supplied without the adapted infeed system, will be back to the standard infeed system. The PFM Swift is a horizontal flow-wrap machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of products, with its standard adjustable forming box, providing the solution to quick and efficient size changes.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Lodovw I Nispfx Aazert Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Lrsdpfezxggljx Aazet Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001-549, TECHNICAL DETAILS Stretch film Lredpsz Agxiefx Aazst Maximum film height: 500 mm Maximum roll diameter: 250 mm Core diameter: 76 mm Film thickness: 10–35 µm Top film Maximum roll diameter: 250 mm Core diameter: 76 mm Film thickness: 15–90 µm

Year of construction: 2003, condition: ready for operation (used), Automatic labeler with vacuumbelt Al-tech model Alline Build 2003 posibillity for 1 or 2 labels or wrap arround max container size 100mm Lrjdpsinh Thjfx Aazet max label height 150mm machine is tested and in good working order video on request by whats-app

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Manufacturer - Adpak Machinery Systems Ltd Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Lrodpoulc Sqofx Aazet Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: used, Year of construction: 2021, The Smipack DV150 is a fully automatic monobloc overlap shrink wrapper with an inline infeed conveyor. It packs products like glass/PET bottles, cans, jars, and boxes at speeds up to 25 packs per minute using a single film reel system. [1, 2, 3, 4] Key Features Operation Modes: Works with film-only, or with pad/tray configurations depending on exact model variations (like ALX-T or ALX-P). Infeed System: Multi-row inline infeed with an electromechanical oscillating sorter to align products. Film Handling: Single film reel design with optional printed film centering devices. Shrink Tunnel: Built with an efficient double-chamber shrinking setup. [1, 2, 3, 4, 5, 6] Ljdpfx Aszp A Uaeazsrt Technical Specifications Max Output: Up to 25 packs per minute (ppm) Max Product Height: 380 mm Max Reel Size: 650 x Ø 400 mm Working Pressure: 6 Bar Machine Weight: Approx. 1,682 kg ed linking conveyor into a high-performance double-chamber tunnel for final heat shrinking. Standard Built-In Features Pneumatic Reel Locking: Uses a dedicated reel chuck with convenient built-in rollers to streamline heavy roll replacements. Safety & Control: Equipped with sliding protection doors featuring a deceleration device, manual reel sealers, and a metric-graduation centering system. Sensor Grid: Features a complete array of photocells monitoring product presence, infeed obstruction, film wrapping, and tunnel outlet accumulation. Are you interested in reading about the FLXMOD® control system details, or do you need a list of available optionals like the printed-film centering device? AI responses may include mistakes. Learn more Year of construction: 2019 & 2021 Max speed: 72000 Current size (ml): 3×2 Container material: Can, Glass, Pet Max. container: height 170 mm Packaging Type: Film Number of lanes: 8 Max reel size: Ø 500 mm Number of reels: 2 Automatic Changeover: No Compatible Spare Parts: 6 months Dimensions: 17500x1800x2400 mm Power: 182 kW Compressed Air: 6 bar

Condition: used, BENHIL 8380 Butter Filling and Wrapping machine for 250gr Current Format | IN STOCK Benhil 8380 Butter Filling and Wrapping Machine Machine Benhil 8380 Capacity up to 80 packets/min (4.800 p/h) Pack size 250 gram Dimensions 100mm x 75mm x 35mm Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW Condition ‘’as is’’ Good Condition (Complete) Lsdpszbg Euefx Aazjrt Price fully refurbished: Ask for Quote

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, SEMI-AUTOMATIC TURNTABLE, FOR PALLET WRAPPING WITH STRETCH FILM Lrjdpfx Asxwa Iyeazet Power Prestretch Pallet Wrapper from the UK agent for Noxon (Robopac is manufacturered by the same company) Upward-downward carriage speed Top and bottom reinforcement wraps Film tension Table rotation speed Ergonomic carriage stop at the end of the cycle Upward-downward cycle Only upward cycle Manual cycle Self learning cycle Altimeter and photocell delay VAT to be added to final price Loading ramp available at £250 plus VAT Delivery within 200miles available at £225 plus VAT

Condition: excellent (used), Year of construction: 2017, operating hours: 627 h, functionality: fully functional, total length: 6,900 mm, total height: 1,800 mm, total width: 1,600 mm, type of input current: three-phase, input voltage: 400 V, input current: 62 A, passage height: 300 mm, overall weight: 1,200 kg, passage width: 800 mm, input frequency: 50 Hz, nominal power (apparent): 43 kVA, throughput speed: 20 mm/s, temperature: 250 °C, Equipment: documentation/manual, BVM SC 8530 D3 Shrink Tunnel – Year of Manufacture 2017 – approx. 627 operating hours For sale is a BVM shrink tunnel SC 8530 D3, year of manufacture 2017, in technically flawless and visually very good, well-maintained condition. The system has only approximately 627 operating hours and is suitable for shrinking packaging films using hot air circulation. The adjustable tunnel transport and the adjustable side and bottom air flow allow the shrinking result to be adapted to different products and films. Technical data Manufacturer: BVM Brunner GmbH & Co. KG Type: SC 8530 D3 Year of manufacture: 2017 Machine no.: 20170962241 Commission no.: 6224 Operating hours: approx. 627 h Mains voltage: 3N 400 V Mains frequency: 50 Hz Current consumption: 62 A Power: 43 kVA Fuse rating: 63 A Max. passage width: 800 mm Lredpfszwk T Tex Aazet Max. passage height: 300 mm Transport speed: approx. 1.2 m/min at 50 Hz Working temperature: 110–250 °C Suitable for film types up to 100 µm External dimensions L × W × H: approx. 6,900 × 1,600 × 1,800 mm Total weight in operating condition: approx. 1,200 kg Sound emission: ≤ 75 dB(A) Equipment / Functions Hot air circulation Adjustable tunnel transport Temperature control Adjustable side air flaps Adjustable bottom air flow Heating fan Cooling fan Electronic preset counter Emergency stop device Cooling automatic Clean and clearly structured control cabinet Original operating manual available Condition The system is in perfect technical condition and is also visually in very good and well-maintained condition. With only approximately 627 operating hours, the machine has very low operating hours. Price €17,000 (negotiable) Inspection possible by arrangement. Further information and pictures available upon request. Subject to prior sale and errors.

Year of construction: 2025, operating hours: 40 h, condition: ready for operation (used), functionality: fully functional, Commercial LST 60L Chocolate Melanger – 2026 – Light Commercial Use We are selling our LST 60L commercial chocolate melanger following the closure of our recently launched premium protein bar production facility in London. The machine was purchased new in 2026 specifically for our own food production and has had relatively light commercial use. It is in good working condition and is ready for production. The machine has a custom-made spiral stone grinding system, designed to provide a finer and more consistent grind and improved refining of chocolate and cocoa products. It is suitable for a range of applications, including: Chocolate production Cocoa nib grinding and refining Nut butters Praline Nut-based fillings Lrodpfx Aajz Dw Arszot Chocolate and nut spreads Other confectionery and food applications Videos of the machine in operation are available and can be provided to serious buyers. We are closing the complete production facility, so other food-production machinery is also available, including: Protein bar extruder Automatic flow-wrapping machines Planetary mixers Blixers Chocolate processing equipment Other production and packaging equipment The equipment was purchased for our own production and is being sold due to the closure of the facility, rather than because of any issue with the machinery.

Condition: excellent (used), Kliklok Certiwrap C150 is for wrap around sleeves for ready meal trays, tubs and pots, either individually or in a variety of multi-pack configurations Ledpfxoy A Rlis Aazjrt

Condition: used, Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, type of input current: AC, This Gruppo Fabbri ELEXA 24 Wrapping machine was manufactured in 2020 and purchased in 2021 from the UK agents Automac UK Ltd. It was used for approx 2 - 3 hours per day wrapping ready meals for 2 years. It is in excellent condition and has been stored ready to use since 2023. It has been decided that it is no longer required. The cost new was in excess of £20k. Collection is from Haydock, Lancashire UK and is available for inspection. There is 1 roll of film available. Ljdpfx Aaozhwg Ijzjrt

Condition: used, Year of construction: 2012, functionality: fully functional, total width: 1,370 mm, total length: 2,950 mm, total height: 1,800 mm, We offer this used Profi Packer SCV 400 film wrapping machine, manufactured in 2012. Manufacturer: Profi Packer Model: SCV 400 Year of manufacture: 2012 Condition: used Category ID: 1262 Type ID: 907 Machine type: Film wrapping machine Machine dimensions (L x W x H): 2,950 x 1,370 x 1,800 mm Cycle rate per minute: approx. 65 cycles Film thickness: 7 to 80 μm Includes infeed conveyor and hot air tunnel for heat sealing. Ljdpfx Ajzvdadeazert If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm Ljdpfxjz Dvi Rs Aazsrt ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: h288 di, power of vacuum pump: 11 W, overall weight: 4,900 kg, Resta Automatic Mattress Packaging Machine: Integrated Compression and Decompression The Resta mattress packaging machine is an automatic packaging machine designed for the industrial packaging of mattresses. In practice, on your production line, this machine performs double packaging with mattress compression followed by decompression, while also protecting it in a suitable film. Advantages of Mattress Packaging in Production and Distribution First and foremost, an efficient mattress packaging machine reduces transport volume by 70 to 80%. The mattress remains compressed during transit and then returns to its original shape upon arrival. In practice, you save storage space and reduce logistics costs. Automated Compression: Mattresses are bagged in PVC or plastic film, without manual intervention. Easy Decompression: The mattress returns to its normal shape in the store or at the customer's location. Optimized Transport: Significant reduction in volume, with more space in the truck and in storage. Presentation for Sale: Final presentation of the mattress in suitable commercial conditions. Vacuum Packaging Machine: Protection and transport of the mattress. What truly changes in production is material compatibility. The Resta mattress packaging machine adapts to different types of mattress films, including PVC film and plastic film, and ensures an airtight seal. The fully automatic packaging process avoids manual handling, limits the risk of tearing, and maintains consistent quality. Compatibility with Spring and Foam Mattresses This is particularly beneficial when your production involves both spring mattresses and foam mattresses. This packaging machine handles both types without major reconfiguration. The equipment can accommodate both bagged mattresses and compressible structures, which simplifies workshop organization. Lredpfxjzmpvrj Aazot Spring Mattresses: Compression without damage to the springs, thanks to a progressive hydraulic system. Foam Mattresses: Adaptation tailored to the product, with rapid shape recovery after compression. Compatibility with PVC film and other specialized packaging films. Professional Sealing: Airtight closure of the film to protect the mattress during transport. Industrial Applications and Mattress Packaging Processes In practice, on an industrial mattress packaging line, this automatic Resta packaging machine integrates after the… Special Feature: Enables double, independent packaging (two separate bags) within the same footprint as a standard packaging machine, thanks to two superimposed polyethylene rolls. Also allows for single or customized packaging (two different rolls, automatic change according to programming). The feed conveyor and disconnectable press also allow for packaging of bed bases. Manual and/or automatic operation, interfaceable with barcodes or RFID on the production line. Official Technical Specifications: Weight: 4,900 kg Electrical consumption: 11 kW Compressed air: 6-10 bar Power supply: 400V – 50Hz three-phase Available Options: Press with 2 or 4 cylinders Reinforced hoist Motorized cradle for additional customization rolls Kit for disposal of polyethylene waste

Year of construction: 2014, condition: not inspected (used), Ilapak Carrera 1000/40 Flowrapper Model Carrera 1000/40 Year 05- 2014 Serial Number 0640490091 Electric 400 V 50 Hz – 5000 watts Jaw width 250 mm Bar transfer conveyor through the jaws Infeed length 2.2 metres Lrodpovkg A Ijfx Aazot Overall length 3.95 meters Overall width 1.4 metres 1 x folding box 120 mm wide product 1 x folding box 140 mm wide product The Machine is in good working condition It is offered at a huge discount to clear it from our stock Price reduced by 50 %

Condition: used, Year of construction: 2000, A machine for packaging containers such as bottles (beer, wine, beverages, oils) or cans into cardboard collective packaging. The containers are grouped and then wrapped with a cardboard blank and glued together to form a collective package. Manufacturer: SOTEMAPACK Model: WRAP-AROUND Year of manufacture: 2000 Capacity: up to 720 packages/hour (12 packages/minute) Control system: S7-300 Original technical documentation included. Lrsdpfsywclwjx Aazot Technical condition: used machine, in working order at the time of disconnection, condition as shown in the pictures.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 10647A, automatic overwrapping machine, primarily used in the pharmaceutical and cosmetics industries for the precise wrapping of individual cartons or bundled packages with film Lredpfxezz Hxtj Aazet Format min / max Length (A) approx. 50 mm approx. 250 mm Width (B) approx. 20 mm approx. 180 mm Height (C) approx. 15 mm approx. 100 mm Operating voltage 400 V / 50 Hz (3-phase) Control system: Pester Pac (Lauer)

Condition: good (used), Year of construction: 2017, functionality: fully functional, Brüninghaus / Fromm / Siat WS 165 NOW pallet wrapper in fully functional condition, manufactured in 2017: Turntable diameter: 165 cm Overall height: 241 cm Ljdpfx Aszpv Igeazort Pallet height: 210 cm Pallet weight: 2,000 kg The access ramp can be attached at the front, left, or right. The WS 165 NOW can be programmed with 10 different programs for individual products and pallets. The machine has 5 different operating modes: - Automatic mode, upward only, as well as up and down - Automatic mode, upward only, as well as up and down with a pause for a pallet top sheet - Manual mode The motor cover (see picture) is only loosely placed and is not attached. Shipping via a freight forwarder is possible after consultation. #8553

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Lodpoz Abkyefx Aazjrt

Condition: excellent (used), Year of construction: 2017, REF: MM6171 Lrodsw Euzmepfx Aazet 1 X Audion CS-Matic 100 shrink wrapper. The Audion CS-Matic 100 offers flexibility for diverse product sizes. Its continuous side-seal system  accommodates a wide range of heights and widths, alongside unlimited product lengths. Smart integrated sensors automatically determine the perfect bag size, while the adjustable, PTFE-coated seal bar ensures high-speed packaging, achieving up to 4200 pristine packs per hour. Technical specification: ⚙️ Manufacturer - Audion Packaging Machines ⚙️ Model - CS-Matic 100 ⚙️ Year of manufacture - 2017 ⚙️ Power - AC Input 380-415V | 50-60 Hz | 2330 W | 10A Benefits: ✅ Very fast cycle - Up to 4200 packs per hour. ✅ Flexibility - Possibility of packing single packs or multipacks at any length. ✅Easy operation with touchscreen control systemm - Sealtime, seal temperature and belt speed can easily be adjusted. ✅ Automated sealing - Continuous cycle sealing. ✅ Motorized systems - Sealing bar and conveyors are controlled by an inverter and encoder. ✅ Wide film choice - The CS Matic 100 can handle polyolefin, polyethylene and pvc centrefolded film. ✅ User-friendly touchscreen - Easy navigation through the menu structure and safe control of all packaging parameters. ✅ Built-in safety features - An emergency stop button is standard equipped.

Condition: used, Year of construction: 2015, Overview This Atlanta Giotto is a single-lane wrap-around case packer for end-of-line carton packaging of PET bottles, rated at more than 20 cartons per minute. It erects the wrap-around case around the bottle group from a flat blank held in an inclined magazine, and closes it with a hot-melt glue unit. Neutral and printed carton both run on the machine. The machine was built in 2015 and ran on a mineral water bottling line until early 2025, packing 1.5 l PET bottles in 4 x 3 cartons and 1.0 l PET bottles in 5 x 3 cartons. It was operated alternately with a shrink-film bundling process, so its operating hours are low. Control is a Siemens S7 PLC with a touchscreen HMI panel. Infeed and outfeed conveyors, motorisation and the CE control panel are part of the machine. Technical data - Manufacturer: Atlanta - Model: Giotto - Year of manufacture: 2015 - Machine type: single-lane wrap-around case packer - Capacity: more than 20 cartons/minute - Infeed: single lane, inclined carton magazine - Carton formats: 80 x H262 mm for 1.5 l PET bottles, 87.5 x H322 mm for 1.0 l PET bottles - Pack patterns: 4 x 3 bottles in 1.5 l PET, 5 x 3 bottles in 1.0 l PET Lrodpfx Aszxtyroazst - Carton: neutral or printed - Case closing: hot-melt glue unit - Control: Siemens S7 PLC with touchscreen HMI panel - Length: approx. 7,175 mm machine body, plus 1,300 mm infeed conveyor - Width: approx. 2,345 mm - Height: approx. 2,336 mm - Infeed height: min. 1,050 mm - Weight: approx. 800 kg magazine section, approx. 2,250 kg packer body - Power supply: 25 kW - Compressed air: approx. 400 Nl/min at 6 bar - Infeed belt: acetal, 685 mm wide Equipment - Infeed and outfeed conveyors - Inclined carton magazine - Hot-melt glue unit - Motorisation and CE control panel - Siemens S7 control with touchscreen panel - Electrical and mechanical drawings - Service and maintenance manuals - Spare parts books Condition Used, in very good condition with a low number of operating hours. The machine was in production until early 2025 and has since been dismantled and moved into storage. It can be inspected dismantled in the warehouse by appointment. Availability Immediately available. Location: Italy. Lifting, craning, loading and transport are available on request and are not included.