Used Industrial Gearbox for sale (31,997)

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Ijdozw H Hiepfx Afhsbb Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: used, functionality: fully functional, 2 x high-quality HANSEN patented industrial gearboxes Type: D631 CT • Input speed: 1,435 rpm • Output speed: 55.8 rpm • Gear ratio: approx. 25.7:1 • Safety factor: 1.6 Iodpfezib A Ajx Afhebb Type: 631 • Power: 33 HP (approx. 24 kW) • Input speed: 1,455 rpm • Output speed: 44 rpm • Gear ratio: approx. 33:1

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm Ibsdpjzimqrjfx Afhob The second part of the pin coupling is also available. The bore in this half is 125 mm. !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm Isdpfx Aforvg N Dshebb 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system. Isdpfx Afezzzm Ejhobb

Condition: used, Large Industrial Plate Heat Exchanger – AISI 316 Stainless Steel Plates Heavy-duty industrial plate heat exchanger equipped with a large plate pack made of AISI 316 stainless steel. Product details: Equipment: Plate heat exchanger Plate material: AISI 316 stainless steel Large industrial plate pack Heavy-duty steel frame Flanged process connections Condition: Used industrial surplus Identification/marking: 316 The heat exchanger is dismantled and available from stock in Rotterdam, The Netherlands. Ibjdpfoz Di D Ijx Afheb Manufacturer, exact model, capacity and other technical specifications are currently unknown. Please refer to the pictures for the configuration and condition. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information or to make an offer.

Condition: used, Complete Industrial Filling, Weighing & Roller Conveyor System Complete industrial filling and container handling system, previously used in an industrial production environment. The system consists of a stainless steel filling station combined with powered roller conveyors, weighing/control equipment, and automated controls. Ibodpfx Asz Diutsfheb Main equipment includes: Stainless steel filling station Powered roller conveyor system Mettler Toledo weighing and control equipment Mettler Toledo operator/control panels Siemens SIMATIC PLC control system Hitachi SJ200 frequency inverter SEW geared motors Vector Aandrijftechniek geared motors Stainless steel electrical/control cabinets Product filling connections and hoses Operator platform with stainless steel safety railing Local operator control panels Safety equipment and emergency stops Nomafast high-speed industrial door Associated electrical and mechanical equipment The system appears to have been designed for the automated handling, positioning, weighing, and filling of containers/drums in an industrial production process. Condition: Used industrial surplus Availability: Complete system as shown in the pictures Location: Rotterdam, The Netherlands The complete system is available for sale. Dismantling and loading can be discussed. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to make an offer.

Condition: excellent (used), Washing machine which can wash a tote bin and its lid at the same time. Excellent condition. Isdpfxov Ihgvs Afhobb

Condition: good (used), Tray wash machine, direct from recently closed ‘meat-free’ factory. In lovely condition. Ijdpforfdq Usx Afhobb

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: D00987, type of input current: three-phase, input voltage: 400 V, temperature: 5 °C, power: 50 kW (67.98 HP), input frequency: 50 Hz, Equipment: documentation/manual, CRETEL / ELIONA INDUSTRIAL WR100.125.190 industrial washing machine – Year 2011 Washing machine for carts, trays, molds, and bakery containers. Suitable for carts up to 1000x1250x1900mm. Equipped with 2 tray carts. Ibsdpfxjzpfkws Afhob

Condition: used, For sale: a demountable warehouse with loading docks of approximately 234 m², located in Dordrecht. A practical and versatile commercial space that is ideally suited for transport, distribution, storage, or expansion of your current business activities. 🔧 Demountable & flexible The building is constructed as a demountable steel structure, offering an interesting solution for entrepreneurs looking for a flexible commercial space. ⚠️ Please note: the sale only includes the demountable commercial building. No land or plot is included. 📐 Dimensions • Length: 36 meters • Width: 6.5 meters • Area: approx. 234 m² • Ridge height: 4.30 meters • Eave height: 4.00 meters 🚛 Equipped with excellent loading and unloading facilities • Steel structure • 8 roller shutter doors of 3 x 3 meters • 8 loading bays / loading docks • Loading docks equipped with flaps • Impact protection • Shock absorbers 💼 Ideal for ✔️ Transport companies ✔️ Logistics & distribution ✔️ Storage ✔️ Entrepreneurs looking for extra commercial space Isdpfx Afozx Sd Nehjbb ✔️ Expansion of existing business activities Practical, spacious, and immediately ready for use. With 8 loading docks and 8 roller shutter doors, this building offers ample opportunities for companies where efficient loading and unloading is a priority. 📍 Dordrecht Interested? Contact us for more information or to arrange a viewing. 📩 Send a non-binding message for more information!

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Ibedszuz H Sopfx Afhob Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Isdpfxszn Rdme Afhjbb Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: not inspected (used), Year of construction: 2022, Lease return Ibsdpfx Aozu Itxsfhjb Including charger Equipped with a pallet or shelf lift, the MiR600 can pick up, transport, and deliver pallets fully automatically within your facility. The MiR600 meets the latest safety standards and is a safe alternative to forklifts. With a payload capacity of up to 600 kg, a speed of 2 m/s, and the ability to maneuver quickly even in confined areas, the MiR600 enables you to significantly optimize your logistics processes. Together with the powerful MiR1350, the MiR600 is the first AMR with IP52 protection on the market. Thanks to its increased resistance to dust particles and water droplets, the MiR600 can also be used in more demanding environments than other AMRs. Serial no. 102003026 Stock ID 13948825 Approximate overall dimensions 138x100x118, approx. 341 kg

Condition: used, Year of construction: 2021, Technical details: Isdpfx Afjy N R Hmohobb voltage: 400/50 V/Hz air-pressure connection: - bar control: - capacity: 150 kg/h protection class: IP 20 temperature range: 0 - 40 °C sound level:

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Iedpeu Ixt Djfx Afhebb

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ref Raun Isdpfxeu Ixkpo Afhjbb

Condition: as good as new (ex-display), Brand new, unused. Double door twin dolav washer, will also wash tote bins. Still in its protective wrapping. Rare opportunity! Isdpjvvw Niefx Afhebb

Condition: new, Unused bin washer. Bought for a contract which never materialised. Ijdpfxotpv T Ns Afhsbb

Condition: excellent (used), GIC VFB4000 in immaculate condition. Was only used for a few weeks prior to the contract not going ahead. Can be supplied as a line with Multipond weigher (also only used for a few weeks) Isdpfx Ajvtcqgsfhjbb

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Isdpfx Afjk Abwlehebb Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Ijdpfx Ajzqur Hsfhsbb Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: used, 1 unit of cooling system INDUSTRIAL FRIGO GRWV 165/Z-BRG 450/HP industrial system combination consisting of a water-cooled chiller and an external dry cooler, self-dismantling Color: as shown in the pictures, according to the images and inspection Ibjdpfx Aozqcg Eofhjb Condition: used

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 819.9 kW (1,114.75 HP), type of input current: three-phase, type of cooling: air, overall weight: 9,348 kg, input voltage: 400 V, total width: 2,250 mm, total length: 8,200 mm, total height: 2,510 mm, warranty duration: 12 months, AIRCOOLED CHILLER STULZ WSJ4232MLA50Z00_1Z 819.9 KW Cooling capacity: 819.9 kW / 233.12 tons (12/7 — 35°C) Year of manufacture: 2025 Options: Hydraulic module. Freecooling. Ijdjz Anw Topfx Afhjbb Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Copper / Aluminum (Freecooling) Compressors: 2 pcs. Bitzer CSHV37-240Y-40A (screw, inverter) Type of refrigerant: R1234ze Number of fans: 12 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos NBE 80-160/167 Dimensions: 8.2x2.25x2.51 m Weight: 9348 kg Working hours: 83/80 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 269.7 kW (366.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 743 kg, input voltage: 400 V, total width: 1,100 mm, total length: 4,250 mm, total height: 1,590 mm, warranty duration: 12 months, Dry-cooler AERMEC WTR 8043BTD 269.7 KW Cooling capacity: 269.7 kW (40/35 - 25°C) Year of manufacture: 2023 Fluid: Glycol + Water Number of fans: 4 pcs. Fan Diameter: 800 mm Volume: 80 dm³ External surface: 630.5 m² Dimensions: 4.25 x 1.1 x 1.59 m. Weight: 743 kg. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Ibjdpsz Agxvsfx Afhjb Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.